31 |
Radiation effects and after-effects in the clear polymethyl methacrylate dosimeterChadwick, K. H. January 1971 (has links)
Thesis--University of Utrecht. / Bibliography: p. 89-92.
|
32 |
PMMA bone cement reinforced by plasma treated particles /Kim, Hong-Youl, January 1997 (has links)
Thesis (Ph. D.)--University of Missouri-Columbia, 1997. / Typescript. Vita. Includes bibliographical references (leaves 82-86). Also available on the Internet.
|
33 |
PMMA bone cement reinforced by plasma treated particlesKim, Hong-Youl, January 1997 (has links)
Thesis (Ph. D.)--University of Missouri-Columbia, 1997. / Typescript. Vita. Includes bibliographical references (leaves 82-86). Also available on the Internet.
|
34 |
A spectrophotometric study of polymethyl methacrylate. Construction of a recording Raman spectrograph.Kinell, Per-Olof. January 1900 (has links)
Diss. Upps. phil. / -IVb-
|
35 |
Radiation effects and after-effects in the clear polymethyl methacrylate dosimeterChadwick, K. H. January 1971 (has links)
Thesis--University of Utrecht. / Bibliography: p. 89-92.
|
36 |
Flexural fatigue behaviour of high performance polyethylene fibre reinforced polymethylmethacrylate maxillary denturesCheng, Yi-Yung. January 2008 (has links)
Thesis (Ph. D.)--University of Hong Kong, 2009. / Includes bibliographical references (leaves 223-249) Also available in print.
|
37 |
Untersuchungen zur Dynamik von Blockcopolymeren in der Grenzfläche von Polymerblends mit rheologischen MethodenJacobs, Ulf. Unknown Date (has links) (PDF)
Universiẗat, Diss., 2001--Freiburg (Breisgau).
|
38 |
Modifikation des Brechungsindexes von Dielektrika mit Hilfe ionisierender StrahlungAndreas, Birk. January 2005 (has links) (PDF)
Universiẗat, Diss., 2005--Bonn.
|
39 |
Impact of packing and processing technique on mechanical properties of acrylic denture base materialsNejatian, T., Sefat, Farshid, Johnson, T. 04 1900 (has links)
Yes / The fracture resistance of polymethylmethacrylate (PMMA) as the most popular
denture base material is not satisfactory. Different factors can be involved in denture fracture.
Among them, flexural fatigue and impact are the most common failure mechanisms of an
acrylic denture base. It has been shown that there is a correlation between the static strength
and fatigue life of composite resins. Therefore, the transverse strength of the denture base
materials can be an important indicator of their service life. In order to improve the fracture
resistance of PMMA, extensive studies have been carried out; however, only a few
promising results were achieved, which are limited to some mechanical properties of PMMA
at the cost of other properties. This study aimed at optimizing the packing and processing
condition of heat-cured PMMA as a denture base resin in order to improve its biaxial flexural
strength (BFS). The results showed that the plain type of resin with a powder/monomer ratio
of 2.5:1 or less, packed conventionally and cured in a water bath for 2 h at 95 °C provides
the highest BFS. Also, it was found that the performance of the dry heat processor is
inconsistent with the number of flasks being loaded.
|
40 |
Gravimetric analysis of solvent removal from thin polymer filmsBoucif, Mustapha Nasr-eddine January 1983 (has links)
No description available.
|
Page generated in 0.0735 seconds