This thesis focuses on my endeavors to prepare new porous polymeric monoliths that are viable to use as supports in flow-through processes. Polymer monoliths of various porous properties and different chemical properties have been prepared utilizing the thermally induced phase separation (TIPS) phenomenon and step-growth polymerization reactions. The aim has been to find appropriate synthesis routes to produce separation supports with fully controlled chemical, physical and surface properties. This thesis includes preparation of porous monolithic materials from several non-cross-linked commodity polymers and engineering plastics by dissolution/precipitation process (i.e. TIPS). Elevated temperatures, above the upper critical solution temperature (UCST), were used to dissolve the polymers in appropriate solvents that only dissolve the polymers above this critical temperature. After dissolution, the homogeneous and clear polymer-solvent solution is thermally quenched by cooling. A porous material, of three dimensional structure, is then obtained as the temperature crosses the UCST. More than 20 organic solvents were tested to find the most compatible one that can dissolve the polymer above the UCST and precipitate it back when the temperature is lowered. The effect of using a mixture of two solvents or additives (co-porogenic polymer or surfactant) in the polymer dissolution/precipitation process have been studied more in depth for poly(vinylidine difluoride) (PVDF) polymers of two different molecular weight grades. Monolithic materials showing different pore characteristics could be obtained by varying the composition of the PVDF-solvent mixture during the dissolute­ion/precipitation process. Step-growth polymerization (often called polycondensat­ion reaction) combined with sol-gel process with the aid of porogenic polymer and block copolymer surfactant have also been used as a new route of synthesis for production of porous melamine-formaldehyde (MF) monoliths. In general, the meso- and macro-porous support materials, for which the synthesis/preparation is discussed in this thesis, are useful to a wide variety of applications in separation science and heterogeneous reactions (catalysis).