The goal of this diploma thesis is to partly elaborate the project documentation of a car repair shop. The building is situated in Hranice (Přerov district) next to the industrial estates near a town part called Nová. It is a three storey building with two aboveground floors and a basement. The building is divided into two parts. The industrial part is designed as prefabricated structure and the non-industrial part is designed to be bricked in Wienerberger Porotherm system. The building is intended for maintenance and repair of racing cars. There are also the office spaces for the company's management and a room for a driving school in the building.

This thesis describes the design of the nursery school in Kostelec nad Orlicí. This is a two-storey building. The building has an atypical shape and is covered flat roof.

The subject of the diploma thesis is to elaborate the design documentation of an apartment house with restaurant. The building is designed in the village of Lipůvka, South-Moravian region, on plot No.: 544/1 and 545/1 – cadastral region Lipůvka. The bulit-up area is 443,3 m2. There are four floors. There is restaurant, one housing unit (for persons with reduced mobility) and utility room in first above-ground floor. Second, third and fourth above-ground floor is for housing. Each of these three floors has three apartments – two apartments 3+k, one apartment 3+1. Entrance to every apartment is from main staircase. The building is based on the foundation walls of concrete C20/25, all vertical walls are from Porotherm System. Celings are composed of ceramic-conrete beams POT, ceramic insertion Miako and concrete. The staircase is monolithic reinforced concrete. The building is without basement, roofed by a warm flat roof.

The aim of this thesis is to design a mountain chalet. Chalet is intended for recreation and accommodation for 23 persons and is designed to gently sloping land in the village of Horní Bečva. The building has two floors without a basement. The main entrance to the building is from the southern side entrance for staff is on the eastern side and the other side entrance to the building is from the north. Part of the building for accommodation is situated on the 2nd floor. Perimeter and interior bearing walls are designed from brick blocks Porotherm in 2.NP then the inner walls of plasterboard. The construction of a roof over the main part of the building is made up of wooden roof purlin system, a roof over your wellness zone is flat vegetation, and the roof over the vestibule is flat with classical music. The main part of the building is covered with a gable roof with a slope of 35 degrees inclinations flat roof over the vestibule wellness zone and 3%.

The main aim of this master project is to design a new nursery school with a parking lot and playground in Jinačovice. The building has single floor and flat green roof. It is divided into three main parts: middle part, class A, class B. The middle part includes a wind lobby, corridor and auxiliary rooms such as cleaning room, staff rooms, storage and utility room. Almost identical classes A and B include a day room/play room, changing room, children washroom, storage of toys and kitchen. The vertical loadbearing masonry is made of Porotherm ceramic blocks. The envelope walls insulated with ETICS. The horizontal loadbearing structure is made of Spiroll panels. Heating energy is supplied by two air-water heat pump. Ventilation is provided by air conditioning with heat recovery. Shading is provided by external louvers. The project was carried out in AutoCAD.

The content of this bachelor work is the project documentation of the hotel On the View in Nový Hradec Králové. The build has three ground floors, without partial basement and it is roofed by flat roof with pea gravel. A build has 2 parts. First part si for guests and second part is for employees. The build has 2 entrance. In the first floor is reception with facility, toilet, restaurant with kitchen, food warehouses, untility room and background for employees. From a restaurant is access to the terrace. In the second and third floor are rooms for 34 guests (of which 2 for handicapped) and background for cleaning women. A Hotel has car park for guests with 13 places ( of which 2 fort handicapped) and car park for employees with 4 places. The construction system is mostly made of polished ceramic blocks Porotherm. Horizontal construction is made up as Porotherm ceiling with brick inserts MIAKO and ceramic-concrete ceiling beams. Part of the proposal is thermal engineering assessment, fire safety solutions and assessments in terms of acoustic and daylight.

The aim of this master thesis is a design of newly-built multifunctional building with a health centre in a cadaster unit of municipality of Smižany in a nascent development of apartment buildings and detached houses. It is a four-storey building, with partial basement, consisting of the basement and three above-ground storeys. On the first floor there is a small health centre with three ambulances and a pharmacy. The second and the third floor has a character of family living, where six flats are designed, and two of them are wheelchair accessible. In the basement there is localized underground garage for residents, warehouses and technical facilities of the building. Main load-bearing walls are founded by plain concrete foundation strips. Main load-bearing columns in the garage are founded by reinforced concrete foundation pads. The structural system of the basement consists of reinforced concrete load-bearing walls, columns, beams and floor slab. The structural system of the above-ground storeys consists of Porotherm clay blocks and the floor structures are designed by Porotherm ceramic fillers and beams. A roofing of the building is realized by a warm flat roof. Main entrances into the building are oriented to the north, respectively into to the west, the residential part of the building is oriented to the east, west and south.

This master´s thesis proposes a design for a new hotel in the Giant. This master´s thesis is elaborated in the form of project documentation for construction. The building is located in the village Spindleruv Mlyn in sloping terrain. The object is designed from a two-way wall system, the porotherm, and the ceilings are designed as stacked also from the porotherm system. The building is a rectangular ground plan with a saddle roof and a dormer. Roof cover is designed from Tondach-baked bags and design is made of wooden elements. The perimeter walls of the underground floor will be made of concrete blocks of BS Klatovy. The internal staircase will be reinforced concrete. The elevator shaft across all floors will be fitted with an evacuation lift. The building will be insulated with a certified ETICS thermal insulation system.

The objective of the thesis is newly built winery in the wine cellars alley situated inVlkoš u Kyjova in the South Moravia Region. Capacity for wine production is around 180,000 litres. In the building are the tasting rooms and pension with the capacity of 30 people. The building has three floors and a partial basement. The winery is located on sloping land. The building is designed as a brick construction, where underground vertical structures are made of blocks permanent formwork Best and part above ground is made of ceramics blocks Porotherm. The horizontal structures are made of prestressed ceiling panels Spiroll above the production area and the rest is made of ceramics system Porotherm. The gable roof, the walkable and warm flat roof are used in the project. The main goal of diploma thesis is to draft a develop project documentation for building construction.

Seminar work solves project documentation of new-build multifunctional house on the street Generála Píky, Brno-Černá Pole. The building is designed as a four-storey partially basement. On the first floor there will be two commercial units, technical background of the house and storage space for apartments. The second floor will be used for administrative purposes. The third and fourth floors will be used for residential purposes. There are 6 cellars in the basement. The building is designed as barrier-free. Parking of vehicles is designed in the courtyard. On the 4th floor there is an exit to the roof of the building.