A single-stage pulse tube cryocooler was designed and fabricated to provide cooling at 50 K for a high temperature superconducting (HTS) magnet, with a nominal electrical input frequency of 50 Hz and a maximum mean helium working gas pressure of 2.5 MPa. Sage software was used for the thermodynamic design of the pulse tube, with an initially predicted 30 W of cooling power at 50 K, and an input indicated power of 1800 W. Sage was found to be a useful tool for the design, and although not perfect, some correlation was established. The fabricated pulse tube was closely coupled to a metallic diaphragm pressure wave generator (PWG) with a 60 ml swept volume. The pulse tube achieved a lowest no-load temperature of 55 K and provided 46 W of cooling power at 77 K with a p-V input power of 675 W, which corresponded to 19.5% of Carnot COP. Recommendations included achieving the specified displacement from the PWG under the higher gas pressures, design and development of a more practical co-axial pulse tube and a multi-stage configuration to achieve the power at lower temperatures required by HTS.

Low cost cryocoolers suitable for long term use in industrial environments are required for superconducting technologies to be competitive with copper based devices in real world applications. Industrial Research Limited is developing such cryocoolers, which use metal diaphragm based pressure wave generators to convert electrical energy to the gas volume displacement required. This project explores methods of increasing the volume displacement provided by the diaphragms while ensuring the components stay within the acceptable material limits. Various alternative diaphragm shapes are tested against the currently used shape through finite element analysis. In addition to testing alternative diaphragm shapes, each shape’s dimensions are optimised. It is concluded the currently used design can be improved by offsetting the piston rest position and slightly reducing the piston diameter. A more detailed analysis is carried out of the bend radii created during fabrication of the diaphragm, and physical testing is performed to verify unexpected calculated stress concentrations. High stresses are observed, however it is concluded unmodelled material features have a large effect on the final stress distribution. It is recommended advantageous shape changes calculated in the first part of the work be trialled to increase the efficiency of the cryocooler, and that investigation of the material behaviour during commissioning of the pressure wave generator be carried out to better understand the operational limits of the diaphragms.