331 |
Sportovní zpravodajství v agendě českých deníků: proměny pokrytí a prezentace sportů a vliv na veřejnou agendu v letech 1993 - 2007 / Sport news in the Czech print media agenda:Changes in coverage and presentation of sports and the influence on a public agenda in 1993-2007Kovaříková, Hana January 2009 (has links)
The diploma thesis Sport news in the Czech print media agenda: changes in coverage and presentation of sports and the influence on a public agenda in 1993 - 2007 analyses sport news of the chosen print media and its changes in a long- time period. This thesis finds out whether and to what extent the sport news pages extend, which sports and in what way are presented, and whether changes of the coverage occur. Next question is, whether the long-term coverage of certain sports can influence public opinion on which sports to consider as important and favorite. In addition to that, this thesis is concerned with the occurrences of personalization and celebritization trends in the Czech print media sport news.
|
332 |
Tepelné úpravy povrchu po 3D FDM tisku / Surface heat treatment after 3D FDM printBřoušek, Lukáš January 2017 (has links)
The topic of diploma thesis are surface heat treatments after 3D print by method Fused Deposition Modeling. In the introduction is located recherche of the given issue. Further, we describe the construction and process of the 3D printer construction, on which will be printed samples for experiments in the next part of the thesis. The aim is to determine the behavior and changes of surface structures of heat-affected samples from different materials. Furthermore, the suitability of the used methods and the possibility of their use in practice.
|
333 |
Model průmyslového robotického ramene / Industrial robotic arm modelSobota, David January 2018 (has links)
This work deals with problematics if industrial robotic arms, with theirs constructions, controling and with theirs role in Industry 4.0. Work describes the process of development and realization of the industrial robotic arm model by 3D printing. Besides construction fo model, work deals with firmware, software and inversion kinematics crucial to controling. Model of robotic arm will be used as learning tool.
|
334 |
Využití laserového skenování pro 3D modelování / Evaluation of laser scanning for 3D modellingOboňová, Veronika January 2017 (has links)
The aim of the diploma thesis is to create a 3D model of the given object using laser scanning technology. Subsequent adjustments of the model and its separate preparation for possible 3D printing will be done through appropriate programs. The next 3D model of the identical object will be made based on the created photos and will be edited and prepared in the same way for possible 3D printing.
|
335 |
Monitorování procesu FDM tisku / Monitoring of FDM printing processRafaja, Hynek January 2019 (has links)
The target of this work is the development of a monitoring system for 3D printing by the Fused Deposition Modeling method, which will be able to identify printing error conditions. During the solving process the needed error conditions were identified. Then, an algorithm was programmed to identify the error condition using the criterion. The resulting Monitoring Hardware was implemented in the printer and experimentally verified. A system has been developed that can identify error conditions with an accuracy of 94.7%. The main benefit of this work is the automatic identification of error conditions that stop printing if necessary. This leads to a reduction in scrap and cost savings. In the future, the software could automatically adjust the print parameters when identifying an error condition. This would prevent or completely eliminate the error condition without user intervention.
|
336 |
Zařízení pro magnetické míchání suspenze s feromagnetickými částicemi / Device for magnetic stirring of suspension with ferromagnetic particlesZítka, Jan January 2019 (has links)
The aim of this work deals with the design and manufacture of a device for mixing of magnetic beads in solution by magnetic field. It is based on my previous bachelor thesis, where the device was created for one microtube (one sample). In this following work, the three improved variants for mixing and separation of 96 samples at one time were designed. The first variant of device, derived from functional prototype from bachelor thesis, was manufactured. First, the magnetic circuit and power converter were designed. Subsequently, the device was manufactured just for one microtube due to functionality testing. The third variant was realized only experimentally, the construction was designed in CAD program, and individual parts were created using 3D printer. As an alternative solution, which should be the compromise among electromagnetic and mechanical stirring, additional prototype was manufactured using 3D printer and CNC instrument. This prototype utilizes neodymium magnets and a stepper motor. The capability of magnetic beads mixing in solution was verified.
|
337 |
Hybridní biopolymerní kompozity pro 3D tiskové aplikace / Hybrid biopolymer composites for 3D printing applicationsMenčík, Přemysl January 2019 (has links)
This dissertation work deals with the thermic and the mechanical behavior of plasticized bio-plastics and bio-composites for the 3D printing applications. The influence of plasticizer chemical structure on thermic and mechanical properties of plasticized polymeric blends from the poly-3-hydroxybutyrate and the poly lactic acid was investigated. Used plasticizers are based on derivative of citric acid. The influence of plasticizers on polymeric matrix and their compatibility was estimated by gear torque rate of melt mixer, respectively rate of plasticizer migration from the material during higher temperature. The plasticizer structure influence on the glass transition temperature and on the kinetics of crystallization of plasticized material was investigated by modulated differential scanning calorimetry. The behavior of material during 3D printing was also observed. Mechanical properties of printed samples, especially their elongation at break, were determined by tensile tests. The largest softening effect was observed using tributylcitrate plasticizer, where the glass temperature decreased by 35 °C and elongation at break increased by 150% compared to non-plasticized reference material. This plasticized polymeric blend showed also sufficient 3D printing properties and was used as the matrix for composites in the next part of this work. Composites were filled by kaolin, limestone, halloysit, fumed silica, talc, magnesium hydroxide and chopped flax fibers. Particle distribution in composites in dependence of used surface treatment of filler was observed by scanning electron microscopy. The influence of composite filler on rheological properties, crystallization kinetics and thermal stability of composites, was observed by viscometry and differential scanning calorimetry. Their mechanical properties and heat deflection temperature were observed on samples prepared by 3D print. Kaolin in composite material showed homogeneous particle distribution and insignificant nucleation effect and influence on thermic stability. Composite filled by kaolin also showed 18% smaller warping during 3D printing compared to non-filled reference. Consequently kaolin was evaluated as suitable inorganic filler for bioplastic composite intended for 3D print and this composite was used in the following part of this thesis. Method of mathematical prediction of Young's modulus was described for composite samples prepared by 3D print. Composites filled by one type of filler – kaolin, or limestone, resp. by combination of both fillers were investigated on the basis of the micromechanic Halpin-Tsai model modified by the semiempiric multiparametric Cerny's equation. Additive and combinational method of Young's modulus evaluation is used for composites with hybrid filling. Deflection of measured and theoretical Young's modulus value of composite filled with kaolin was decreased by established correction from 21% to 1% and for composites filled with limestone from 13% to 9%. In this manner it is possible to predict the Young's modulus of the samples prepared by 3D print.
|
338 |
Studium degradačních procesů inkjetových inkoustů / Study of Inkjet Inks Degradative ProcessesSamcová, Kateřina January 2009 (has links)
This diploma thesis follows the degradation of inkjet print by ultraviolet radiation and ozone effect for different types of papers. Colour test charts for the evaluation of accelerated ageing effect of ultraviolet light and gas fading were designed. These test charts were printed by dye-based inks on selected receiving media and exposed to ozone-enriched environment, UV radiation and their combination. The colorimetric values L* a* b* were calculated from spectral data of all patches of the test charts. The ozone effect on the prints was evaluated in the terms of total colour difference and dye concentration. The degradation of dye caused by ozone was observed also in a long-term period, after the contact of sample with ozone was terminated. Results of printed samples accelerated ageing by UV radiation and those that were influenced by the ozone effect were evaluated in the same way. It was found out that UV radiation and ozone treatment have a different effect on the degradation of dyes. The degradation rate is also strongly influenced by the receiving layer composition of papers used for inkjet printing. Also the catalytic effect of dyes was evaluated.
|
339 |
Univerzální modul s připojením na ethernet / Universal ethernet moduleŘeháček, Tomáš January 2015 (has links)
This master’s thesis deals with creating a universal module with Ethernet interface and its using for digital values measurement. The main module components are gate array FPGA, microprocessor, PHY chip and RJ45 connector. Printed circuit board is in this thesis designed in Eagle. The chase for board is drawn in SketchUp and printed on a 3D printer. There is a code implemented in created universal module that is performing the function of logic analyzer. Data measured by the analyzer are sent to the Ethernet using UDP/IPv4 protocol. The last part is creating an application in C# to display the measured waveforms on a PC.
|
340 |
Návrh výrobní technologie FDM tiskové hlavy / Creation of production technology for FDM print headTalafa, Michal January 2012 (has links)
The thesis is focused on the creation of production technology for unit and series production for FDM print head. Production will be set in a private company Pevot product, s.r.o. For the production will be used machines, tools and technologies that the company commonly uses. On the basis of creation of production processes will be calculated price of the print head and it will be compared with the price of a similar product currently available on the Internet. After comparing the company may decide , if itself will produce and offer on the market.
|
Page generated in 0.0393 seconds