A parameter-free solution is presented for data projector calibration using a single camera and Gray coded structured light patterns. The proposed method assumes that both camera and projector exhibit significant non-linear distortion, and that projection surfaces can be either planar or freeform. The camera is calibrated first through traditional methods, and the calibrated images are then used to detect Gray coded patterns displayed on a surface by the data projector. Projector to camera correspondences are created by decoding the patterns in the camera images to form a 2D correspondence map. Calibrated systems produce geometrically correct, ex- tremely short throw projections, while maintaining or exceeding the projection size of a standard configuration. Qualitative experiments are performed on two baseline images, while quantitative data is recovered from the projected image of a chessboard pattern. A typical throw ratio of 0.5 can be achieved with a pixel distance error below 1. / Thesis (Master, Electrical & Computer Engineering) -- Queen's University, 2010-06-29 09:33:50.311

We introduce a technique to automatically correct color inconsistencies in a display composed of one or more digital light projectors (DLP). The method is agnostic to the source of error and can detect and address color problems from a number of sources. Examples include inter- and intra-projector color differences, display surface markings, and environmental lighting differences on the display. In contrast to methods that discover and map all colors into the greatest common color space, we minimize local color discontinuities to create color seamlessness while remaining tolerant to significant color error. The technique makes use of a commodity camera and highdynamic range sensing to measure color gamuts at many different spatial locations. A differentiable energy function is defined that combines both a smoothness and data term. This energy function is globally minimized through the successive application of projective warps defined using gradient descent. After convergence the warps can be applied at runtime to minimize color defects in the display. The framework is demonstrated on displays that suffer from several sources of color error.