This thesis deals with structural design of a steel frame footbridge with wheelchair access, which will lead pedestrian and cyclists‘ traffic over the river Thaya in Břeclav. The footbridge is a structure of one field, lightness of a bridge opening is 58,92 m and a span length is 60,25 m. A light width of an area between rails is 2,5 m. The footbridge is constructed of a truss beam cable – stayed bridge on an oblique pylon of 20,0 m length and a preloaded steel suspender. The thesis was processed according to valid standards ČSN EN.

The subject of this diploma thesis is design a cable-supported pedestrian bridge. Three different variants of the solution were created for the design. For detailed processing, variant no.2 was chosen - a suspended bridge with a pylon in the middle of the span. The main task is the static design of the supporting structure. The model for the lengthways is created in ANSYS. The SCIA engineer was used to solve crosswise. The assessment and dimensioning was done according to the limit state principles and valid standards.

The thesis deal with structural design of steel footbridge for pedestrians and cyclist over the Bečva river in Černotín village. Span of the footbridge is 50 m. The basic material is steel S355 and S460. At the beginning were created two variants. First one is an arched footbridge and the second one is cable stayed footbridge. After evaluation variants was selected the cable stayed footbridge. The selected variant was assessed in detail including joints and bearings. Structure is designed in compliance with valid standards of ČSN EN and corresponds with ultimate and serviceability limit state. For structural design was used software RFEM 5.17.01 of Dlubal company.

The aim of this master thesis is a design of the pedestrian bridge across the highway. The bridge is formed by a slab structure of 6 spans with lenghts from 9 to 51 m. The main spans are suspended on a V shape pylon. The deck of the span across the highway is assambled of precast segments and composite deck slab. The deck is in the lenghtways kept in the parabolic arch. The model of the construction is made in software ANSYS, the solution was done non-linear. The design and assessment are according to the europien standard.

My diploma thesis is focused on design and assessment of structural system of airport terminal. The design is processed in two options. Both of them has the same dimensions but structural system is changed. Floor plan is in the shape of part of annulus. Width of the hall is changing, in the middle of the hall is aproximatly 90 m. Length is 52,5 m, 10 m of this length is porch. Roof slope is 3° towards to the front of the hall.

In my thesis, I created a study of plan curved cable stayed pedestrian bridge. As the main construction material is used prestressed concrete. Suspenders and railing are made from steel. The footbridge has a length of 130,00 meters and a width of 3,70 meters. The plan shape of the structure is composed of two oposite arches. Bridge deck is made of box girder. The bridge deck is single-side suspended on two concrete pylons with a height of 39,00 m. Pylons are supported by suspender.

This diploma thesis aims to design a structure of pedestrian bridge over the Svratka river. To make a preliminary study of possible bridging, three different outlines were drafted. The cable-stayed variant was selected for further analysis. Two towers, inclined in both their longitudinal and transverse direction, support a cast-in-place post-tensioned concrete deck through stay cables anchored in the tower and the deck. After determining the desired initial state, a finite element analysis was carried out using the Ansys software. The capacity of all main load-bearing elements was checked so it meets the ULS and SLS design criteria in accordance with EN 1992 codes.

The diploma thesis describes the design and assessment of steel structure of the roofing of the military museum in Králíky. The supporting structure of hall is 40.00 meters span. The total layout are 55.93 x 72.04 m, building height 11.43 m, 16.11 m pylon height. Main construction material is steel, grade S355, secondary constructions are made from steel grade S235, rods are made from steel grade S460. I did optimization of steel structure and chose the best option. For this option I made detailed structural analysis. It is prepared by static analysis of the main load-bearing parts of the structure, including joints and details. The supporting structure of hall consists in the transverse direction from the curved spatial lattice structure made of steel circular tubes which hang on rods on a sloped pylon. Part of the report is open-air roofing.