Spelling suggestions: "subject:"quantitativetrait loci"" "subject:"quantitative.it loci""
1 |
Mapping stress tolerance genetic loci in Arabidopsis thalianaAhmed, Helal Uddin January 2002 (has links)
No description available.
|
2 |
Quantitative Genetic Analysis For Flowering Time In Primitive Upland Cotton, Gossypium Hirsutum L., And Chromosome Assignment Of Bac-Derived Ssr MarkersGuo, Yufang 15 December 2007 (has links)
Cotton is a very important economical crop in the U.S. and throughout the world. The developments in molecular biology offer new and innovative approaches toward evaluating and understanding genetic mechanisms of important agronomical traits. Bacterial artificial chromosome (BAC) libraries have rapidly become the preferred choice for physical mapping. BAC-derived microsatellite or simple sequence repeats (SSRs) markers facilitate the integration of physical and genetic recombination maps. The first objective in this research was to identify chromosome locations of a set of BAC-derived SSR markers in tetraploid cotton. A total of 192 SSR primer pairs were derived from BAC clones of an Upland cotton (Gossypium hirsutum L.) genetic standard line TM-1. Using deletion analysis method, we assigned 39 markers out of the 192 primer pairs to 18 different chromosomes or chromosome arms. Chromosomal assignment of these markers will help to improve the current cotton genetic linkage maps and facilitate positional candidate gene cloning, comparative genome analysis, and the coordination of chromosome-based genome sequencing projects. Wild race stocks (Gossypium spp.) represent valuable resources for genetic improvement. Most primitive accessions are photoperiod sensitive; they do not flower under the long days of the U.S. cotton belt. Molecular markers were used to locate quantitative trait loci (QTLs) for node of first fruiting branch (NFB), node of first open boll (NOB), and fruiting score (FS). An F2 population consisted of 251 plants from the cross of a day neutral cultivar Deltapine 61, and a photoperiod sensitive accession Texas 701, were used in this study. For each trait, three major QTLs were mapped to chromosome 16, 21, and 25. QTL analysis was also conducted in two F2 populations generated from the cross between Deltapine 61 and two photoperiod sensitive accessions (T1107, PI 607174; T1354, PI 530082) of Upland cotton (G. hirsutum L.). QTL analysis indicated that NFB differed between the two F2 populations. Two major QTLs (q-NFB-c21-1 and q-NFB-c25-1) were found in population 1107; whereas, only one (q-NFB-c25-1) was important in population 1354. Discovering QTLs associated with flowering time may have the potential to facilitate day neutral conversion of wild photoperiod sensitive accessions.
|
3 |
Design and analysis of genetical genomics studies and their potential applications in livestock researchLam, Alex C. January 2009 (has links)
Quantitative Trait Loci (QTL) mapping has been widely used to identify genetic loci attributable to the variation observed in complex traits. In recent years, gene expression phenotypes have emerged as a new type of quantitative trait for which QTL can be mapped. Locating sequence variation that has an effect on gene expression (eQTL) is thought to be a promising way to elucidate the genetic architecture of quantitative traits. This thesis explores a number of methodological aspects of eQTL mapping (also known as “genetical genomics”) and considers some practical strategies for applying this approach to livestock populations. One of the exciting prospects of genetical genomics is that the combination of expression studies with fine mapping of functional trait loci can guide the reconstruction of gene networks. The thesis begins with an analysis in which correlations between gene expression and meat quality traits in pigs are investigated in relation to a pork meat quality QTL previously identified. The influence on power due to factors including sample size and records of matched subjects is discussed. An efficient experimental design for two-colour microarrays is then put forward, and it is shown to be an effective use of microarrays for mapping additive eQTL in outbred crosses under simulation. However, designs optimised for detecting both additive and dominance eQTL are found to be less effective. Data collected from livestock populations usually have a pedigreed structure. Many family-based association mapping methods are rather computationally intensive, hence are time-consuming when analysing very large numbers of traits. The application of a novel family-based association method is demonstrated; it is shown to be fast, accurate and flexible for genetical genomics. Furthermore, the results show that multiple testing correction alone is not sufficient to control type I errors in genetical genomics and that careful data filtering is essential. While it is important to limit false positives, it is desirable not to miss many true signals. A multi-trait analysis based on grouping of functionally related genes is devised to detect some of the signals overlooked by a univariate analysis. Using an inbred rat dataset, 13 loci are identified with significant linkage to gene sets of various functions defined by Gene Ontology. Applying this method to livestock species is possible, but the current level of annotations is a limiting factor. Finally, the thesis concludes with some current opinions on the development of genetical genomics and its impact on livestock genetics research.
|
4 |
Mapping quantitative trait loci in microbial populationsLogeswaran, Sayanthan January 2011 (has links)
Linkage between markers and genes that affect a phenotype of interest may be determined by examining differences in marker allele frequency in the extreme progeny of a cross between two inbred lines. This strategy is usually employed when pooling is used to reduce genotyping costs. When the cross progeny are asexual the extreme progeny may be selected by multiple generations of asexual reproduction and selection. In this thesis I will analyse this method of measuring phenotype in asexual cross progeny. The aim is to examine the behaviour of marker allele frequency due to selection over many generations, and also to identify statistically significant changes in frequency in the selected population. I will show that stochasticity in marker frequency in the selected population arises due the finite initial population size. For Mendelian traits, the initial population size should be at least in the low to mid hundreds to avoid spurious changes in marker frequency in the selected population. For quantitative traits the length of time selection is applied for, as well as the initial population size, will affect the stochasticity in marker frequency. The longer selection is applied for, the more chance of spurious changes in marker frequency. Also for quantitative traits, I will show that the presence of epistasis can hinder changes in marker frequency at selected loci, and consequently make identification of selected loci more difficult. I also show that it is possible to detect epistasis from the marker frequency by identifying reversals in the direction of marker frequency change. Finally, I develop a maximum likelihood based statistical model that aims to identify significant changes in marker frequency in the selected population. I will show that the power of this statistical model is high for detecting large changes in marker frequency, but very low for detecting small changes in frequency.
|
5 |
Locating genes for carrot fly resistance and agronomic performance in carrots using molecular markersFarquhar, Alex Graham Lennox January 2000 (has links)
No description available.
|
6 |
Genetické markery ovlivňující ukládání intramuskulárního tuku - gen LEPRMoltašová, Hana January 2012 (has links)
No description available.
|
7 |
Identification of Quantitative Trait LOCI Contributing Resistance to Aflatoxin Accumulation in Maize Inbreds MP715 And MP717Smith, Jesse Spencer 11 August 2017 (has links)
Pre-harvest contamination of maize grain with aflatoxin is a chronic problem worldwide and particularly in the southeastern U.S. Aflatoxin is a mycotoxin produced by the fungus Aspergillus flavus, an opportunistic ear-rot pathogen of maize (Zea mays). Resistance to aflatoxin accumulation is heritable, and resistant germplasm-lines are available. These lines are derived from “exotic” genetic backgrounds and were released as sources of resistance, not parental inbreds. However, all current sources of resistance are quantitative, which complicates conventional efforts to introgress resistance alleles from unadapted but resistant donor lines to adapted but susceptible recipient lines. Mapping quantitative trait loci (QTL) and their linked markers enables targeted introgression of the desired alleles via marker-assisted selection. Quantitative trait loci were identified in two F2:3 mapping populations, derived from crossing resistant inbreds Mp715 and Mp717 to a common susceptible parent (Va35). The Mp715 x Va35 population was phenotyped for aflatoxin accumulation under artificial inoculation in replicated field trials at Mississippi State (MSU) in 2015 and 2016. The Mp717 x Va35 population was phenotyped at MSU and Lubbock, TX in 2016. Populations were genotyped using simple sequence repeat (SSR) and single nucleotide polymorphism (SNP) markers and linkage maps created in JoinMap4. To locate QTL, linkage maps, genotypes, and phenotypes were analyzed jointly in QTL Cartographer 2.5 using composite interval mapping (CIM) and multiple interval mapping (MIM) procedures. Five QTL with the beneficial allele contributed by Mp715 were identified during CIM in bins 5.01, 6.06, 7.03 10.04 and 10.05. Three QTL with the beneficial allele contributed by Mp717 were identified during CIM in bins 3.07/3.08, 7.02/7.03, and 10.05. In both populations, QTL were identified with the beneficial allele contributed by Va35. Those QTL did not co-locate across populations but four of the six were on chromosome 1. Significant QTL effects from CIM were used as the initial model terms in MIM, where all QTL effects were fit simultaneously and their gene-action and epistatic interactions estimated.
|
8 |
Multiple-trait multiple-interval mapping of quantitative-trait lociJoehanes, Roby January 1900 (has links)
Master of Science / Department of Statistics / Gary L. Gadbury / QTL (quantitative-trait locus) analysis aims to locate and estimate the effects of genes that are responsible for quantitative traits, such as grain protein content and yield, by means of statistical methods that evaluate the association of genetic variation with trait (phenotypic) variation. Quantitative traits are typically polygenic, i.e., controlled by multiple genes, with varying degrees of in uence on the phenotype. Several methods have been developed to increase the accuracy of QTL location and effect estimates. One of them, multiple interval mapping (MIM) (Kao et al. 1999), has been shown to be more accurate than conventional methods such as composite interval mapping (CIM) (Zeng 1994). Other QTL analysis methods have been developed to perform additional analyses that might be useful for breeders, such as of pleiotropy and QTL-by-environment (QxE) interaction. It has been shown (Jiang and Zeng 1995) that these analyses can be carried out with a multivariate extension of CIM (MT-CIM) that exploits the correlation structure in a set of traits. In doing so, this method also improves the accuracy of QTL location detection. This thesis describes the multivariate extension of MIM (MT-MIM) using ideas from MT-CIM. The development of additional multivariate tests, such as of pleiotropy and QxE interaction, and several methods pertinent to the development of MT-MIM are also described. A small simulation study shows that MT-MIM is more accurate than MT-CIM and univariate MIM. Results for real data show that MT-MIM is able to provide a more accurate and precise estimate of QTL location.
|
9 |
Bioinformatics tools for the genetic dissection of complex traits in chickensCabrera Cárdenas, Claudia Paola January 2009 (has links)
This thesis explores the genetic characterization of the mechanisms underlying complex traits in chicken through the use and development of bioinformatics tools. The characterization of quantitative trait loci controlling complex traits has proven to be very challenging. This thesis comprises the study of experimental designs, annotation procedures and functional analyses. These represent some of the main ‘bottlenecks’ involved in the integration of QTLs with the biological interpretation of high-throughput technologies. The thesis begins with an investigation of the bioinformatics tools and procedures available for genome research, briefly reviewing microarray technology and commonly applied experimental designs. A targeted experimental design based on the concept of genetical genomics is then presented and applied in order to study a known functional QTL responsible for chicken body weight. This approach contrasts the gene expression levels of two alternative QTL genotypes, hence narrowing the QTL-phenotype gap, and, giving a direct quantification of the link between the genotypes and the genetic responses. Potential candidate genes responsible for the chicken body weight QTL are identified by using the location of the genes, their expression and biological significance. In order to deal with the multiple sources of information and exploit the data effectively, a systematic approach and a relational database were developed to improve the annotation of the probes of the ARK-Genomics G. gallus 13K v4.0 cDNA array utilized on the experiment. To follow up the investigation of the targeted genetical genomics study, a detailed functional analysis is performed on the dataset. The aim is to identify the downstream effects through the identification of functional variation found in pathways, and secondly to achieve a further characterization of potential candidate genes by using comparative genomics and sequence analyses. Finally the investigation of the body weight QTL syntenic regions and their reported QTLs are presented.
|
10 |
Developing a web accessible integrated database and visualization tool for bovine quantitative trait lociPolineni, Pavana 29 August 2005 (has links)
A quantitative trait locus (QTL) is the location of a gene that affects a trait that is measured on a quantitative (linear) scale. Many important agricultural traits such as weight gain, milk fat content and intramuscular fat in cattle are quantitative traits. There is a need to integrate genomic sequence data with QTL data and to develop an analytical tool to visualize the data. Without integration, application of this data to agricultural enterprise productivity will be slow and inefficient. My thesis presents a web-accessible tool called the Bovine QTL Viewer developed to solve this problem. It consists of an integrated database of bovine QTL and the QTL viewer to view the QTL and their relative chromosomal position. This tool generates dynamic and interactive images and supports research in the field of genomics. For this tool, the data is modeled and the QTL viewer is developed based on the requirements and feedback of experts in the field of bovine genomics.
|
Page generated in 0.3737 seconds