In recent years, the scientific community has expressed interest in the ability to observe global climate indicators such as polar sea ice. Advances in microwave remote sensing technology have allowed a large-scale and detailed study of sea ice characteristics. This thesis provides the analysis and development of sea ice mapping algorithms for the SeaWinds scatterometer. First, an in-depth analysis of the Remund Long (RL) algorithm for SeaWinds is performed. From this study, several improvements are made to the RL algorithm which enhance its performance. In addition, a new method for automated polar sea ice mapping is developed for the SeaWinds instrument. This method is rooted in Bayes decision theory, and incorporates an adaptive model for seasonally fluctuating sea ice and ocean microwave signatures. The new approach is compared to the RL algorithm, to passive microwave data, and to high-resolution SAR imagery for validation.

Ku-band dual-polarization radar backscatter measurements from the SeaWinds on QuikScat scatterometer and microwave radiometer measurements from the Special Sensor Microwave/Imager (SSM/I) are used to determine periods of surface melt and freeze in the Antarctic ice-shelves. The normalized radar backscatter (sigma-0) and backscatter polarization ratio (PR) are used in the maximum likelihood estimation of the ice-state. This method is used to infer the daily ice-surface conditions for 25 selected study points located on the Ronne, Ross, Larsen, Fimbul, Amery, and Shackleton Ice-shelves. The temporal and spatial variations of the radar response are also observed for various neighborhood sizes surrounding each given point during the study period. Criteria for determining the dates of melt-onset and freeze-up for each Austral summer are also presented. Validation of the ice-state and melt-onset date estimates is performed by analyzing corresponding brightness temperature (Tb) measurements from radiometers. QuikScat sigma-0 measurements from 1999 through 2003 are analyzed and it is shown that Ku-band scatterometers are very useful for determining periods of melt in Antarctic ice-sheets and provide high temporal and spatial resolution ice-state estimates. These estimates can be important for long-term studies of the climatic effects of the seasonal and inter-annual melting of the Antarctic ice-sheets. The SeaWinds on QuikScat (QuikScat) and SeaWinds on ADEOS-2 (SeaWinds) scatterometers are identical radar sensors on different spaceborne platforms traversing similar orbits. QuikSCAT and SeaWinds data are used to infer near-surface wind vectors, polar sea-ice extent, polar-ice melt events, among others. In order to verify the relative calibration of these two sensors a simple cross-calibration method is implemented based on land measurements. A first-order polynomial model for the incidence angle dependence of sigma-0 is used to account for biases in the sigma-0 measurements. This model is applied to selected regions of the Amazon rainforest and the Sahara desert. It is shown that the two sensors are well calibrated. Additionally, evidence of a previously presumed diurnal cycle in the Amazon rainforest backscatter is given.

Ku-band dual-polarization radar backscatter measurements from the SeaWinds on QuikScat (QuikScat) and SeaWinds on ADEOS-2 (SeaWinds) scatterometers are used to classify the melt state and estimate melt severity in Greenland. Backscatter measurements are organized into high temporal and high spatial resolution images created using the Scatterometer Image Reconstruction (SIR) algorithm and a new temporal data segmentation technique. Melt detection is performed using a layered electromagnetic model combined with a Markov chain model. The new melt detection method allows classification of the snow-pack into three states: melt, refreeze, and frozen. Melt severity and refreeze severity indexes are also developed. The melt detection methods developed in this thesis are verified by using a one-dimensional geophysical/electromagnetic model simulation of the snow-pack under melting conditions and by comparison with in situ weather station data at the ETH Camp in western Greenland. The diurnal cycle of backscatter measurements is also analyzed at this location. The melt detection and estimation method is applied to the entire Greenland ice-sheet. The resulting melt classifications and melt severity indexes are used to generate a number of maps outlining the features of the 2003 melt season. Good agreement of the melt severity and a 1978 SASS Greenland ice facies map is observed.

The presence of rain over oceans interferes with the measurement of sea surface wind speed and direction from the Sea Winds scatterometer and as a result wind measurements contain biases in rain regions. In past research at the Central Florida Remote Sensing Lab, it has been observed that rain has multi-fractal behavior. In this report we present an algorithm to detect the presence of rain so that rain regions are flagged. The forward and aft views of the horizontal polarization σ0 are used for the extraction of textural information with the help of multi-fractals. A single negated multi-fractal exponent is computed to discriminate between wind and rain. Pixels with exponent value above a threshold are classified as rain pixels and those that do not meet the threshold are further examined with the help of correlation of the multi-fractal exponent within a predefined neighborhood of individual pixels. It was observed that the rain has less correlation within a neighborhood compared to wind. This property is utilized for reactivation of the pixels that fall below a certain threshold of correlation. An advantage of the algorithm is that it requires no training, that is, once a threshold is set, it does not need any further adjustments. Validation results are presented through comparison with the Tropical Rainfall Measurement Mission Microwave Imager (TMI) 2A12 rain retrieval product for one whole day. The results show that the algorithm is efficient in suppressing non-rain (wind) pixels. Also algorithm deficiencies are discussed, for high wind speed regions. Comparisons with other proposed approaches will also be presented.

Although generally accurate, the quality of SeaWinds on QuikSCAT scatterometer ocean vector winds is compromised by certain natural phenomena and retrieval algorithm limitations. This dissertation addresses three main contributers to scatterometer estimate error: poor ambiguity selection, estimate uncertainty at low wind speeds, and rain corruption. A quality assurance (QA) analysis performed on SeaWinds data suggests that about 5% of SeaWinds data contain ambiguity selection errors and that scatterometer estimation error is correlated with low wind speeds and rain events. Ambiguity selection errors are partly due to the "nudging" step (initialization from outside data). A sophisticated new non-nudging ambiguity selection approach produces generally more consistent wind than the nudging method in moderate wind conditions. The non-nudging method selects 93% of the same ambiguities as the nudged data, validating both techniques, and indicating that ambiguity selection can be accomplished without nudging. Variability at low wind speeds is analyzed using tower-mounted scatterometer data. According to theory, below a threshold wind speed, the wind fails to generate the surface roughness necessary for wind measurement. A simple analysis suggests the existence of the threshold in much of the tower-mounted scatterometer data. However, the backscatter does not "go to zero" beneath the threshold in an uncontrolled environment as theory suggests, but rather has a mean drop and higher variability below the threshold. Rain is the largest weather-related contributer to scatterometer error, affecting approximately 4% to 10% of SeaWinds data. A simple model formed via comparison of co-located TRMM PR and SeaWinds measurements characterizes the average effect of rain on SeaWinds backscatter. The model is generally accurate to within 3 dB over the tropics. The rain/wind backscatter model is used to simultaneously retrieve wind and rain from SeaWinds measurements. The simultaneous wind/rain (SWR) estimation procedure can improve wind estimates during rain, while providing a scatterometer-based rain rate estimate. SWR also affords improved rain flagging for low to moderate rain rates. QuikSCAT-retrieved rain rates correlate well with TRMM PR instantaneous measurements and TMI monthly rain averages. SeaWinds rain measurements can be used to supplement data from other rain-measuring instruments, filling spatial and temporal gaps in coverage.

The Ku band microwave remote sensor, SeaWinds, was developed at the National Aeronautics and Space Administration (NASA) Jet Propulsion Laboratory (JPL). Two identical SeaWinds instruments were launched into space. The first was flown onboard NASA QuikSCAT satellite which has been orbiting the Earth since June 1999, and the second instrument flew onboard the Japanese Advanced Earth Observing Satellite II (ADEOS-II) from December 2002 till October 2003 when an irrecoverable solar panel failure caused a premature end to the ADEOS-II satellite mission. SeaWinds operates at a frequency of 13.4 GHz, and was originally designed to measure the speed and direction of the ocean surface wind vector by relating the normalized radar backscatter measurements to the near surface wind vector through a geophysical model function (GMF). In addition to the backscatter measurement capability, SeaWinds simultaneously measures the polarized radiometric emission from the surface and atmosphere, utilizing a ground signal processing algorithm known as the QuikSCAT / SeaWinds Radiometer (QRad / SRad). This dissertation presents the development and validation of a mathematical inversion algorithm that combines the simultaneous active radar backscatter and the passive microwave brightness temperatures observed by the SeaWinds sensor to retrieve the oceanic rainfall. The retrieval algorithm is statistically based, and has been developed using collocated measurements from SeaWinds, the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) rain rates, and Numerical Weather Prediction (NWP) wind fields from the National Centers for Environmental Prediction (NCEP). The oceanic rain is retrieved on a spacecraft wind vector cell (WVC) measurement grid that has a spatial resolution of 25 km. To evaluate the accuracy of the retrievals, examples of the passive-only, as well as the combined active / passive rain estimates from SeaWinds are presented, and comparisons are made with the standard TRMM rain data products. Results demonstrate that SeaWinds rain measurements are in good agreement with the independent microwave rain observations obtained from TMI. Further, by applying a threshold on the retrieved rain rates, SeaWinds rain estimates can be utilized as a rain flag. In order to evaluate the performance of the SeaWinds flag, comparisons are made with the Impact based Multidimensional Histogram (IMUDH) rain flag developed by JPL. Results emphasize the powerful rain detection capabilities of the SeaWinds retrieval algorithm. Due to its broad swath coverage, SeaWinds affords additional independent sampling of the oceanic rainfall, which may contribute to the future NASA's Precipitation Measurement Mission (PMM) objectives of improving the global sampling of oceanic rain within 3 hour windows. Also, since SeaWinds is the only sensor onboard QuikSCAT, the SeaWinds rain estimates can be used to improve the flagging of rain-contaminated oceanic wind vector retrievals. The passive-only rainfall retrieval algorithm (QRad / SRad) has been implemented by JPL as part of the level 2B (L2B) science data product, and can be obtained from the Physical Oceanography Distributed Data Archive (PO.DAAC).

For the construction of a wind farm, one needs to assess the wind resources of the considered site location. Using reference time series from numerical weather prediction models, global assimilation databases or observations close to the area considered, the on-site measured wind speeds and wind directions are corrected in order to represent the actual long-term wind conditions. This long-term correction (LTC) is in the typical case performed by making use of the linear regression within the Measure-Correlate-Predict (MCP) method. This method and two other methods, Sector-Bin (SB) and Synthetic Time Series (ST), respectively, are used for the determination of the uncertainties that are associated with LTC.The test area that has been chosen in this work, is located in the region of the North Sea, using 22 quality controlled meteorological (met) station observations from offshore or nearby shore locations in Denmark, Norway and Sweden. The time series that has been used cover the eight year period from 2002 to 2009 and the year with the largest variability in the wind speeds, 2007, is used as the short-term measurement period. The long-term reference datasets that have been used are the Weather Research and Forecast model, based on both ECMWF Interim Re-Analysis (ERA-Interim) and National Centers for Environmental Prediction Final Analysis (NCEP/FNL), respectively and additional reference datasets of Modern Era Re-Analysis (MERRA) and QuikSCAT satellite observations. The long-term period for all of the reference datasets despite QuikSCAT, correspond to the one of stations observations. The QuikSCAT period of observations used cover the period from November 1st, 1999 until October 31st, 2009.The analysis is divided into three parts. Initially, the uncertainty connected to the corresponding reference dataset, when used in LTC method, is investigated. Thereafter the uncertainty due to the concurrent length of the on-site measurements and reference dataset is analyzed. Finally, the uncertainty is approached using a re-sampling method of the Non-Parametric Bootstrap. The uncertainty of the LTC method SB, for a fixed concurrent length of the datasets is assessed by this methodology, in an effort to create a generic model for the estimation of uncertainty in the predicted values for SB.The results show that LTC with WRF model datasets based on NCEP/FNL and ERA-Interim, respectively, is slightly different, but does not deviate considerably in comparison when comparing with met station observations. The results also suggest the use of MERRA reference dataset in connection with long-term correction methods. However, the datasets of QuikSCAT does not provide much information regarding the overall quality of long-term correction, and a different approach than using station coordinates for the withdrawal of QuikSCAT time series is preferred. Additionally, the LTC model of Sector-Bin is found to be robust against variation in the correlation coefficient between the concurrent datasets. For the uncertainty dependence of concurrent time, the results show that an on-site measurement period of one consistent year or more, gives the lowest uncertainties compared to measurements of shorter time. An additional observation is that the standard deviation of long-term corrected means decreases with concurrent time. Despite the efforts of using the re-sampling method of Non-Parametric Bootstrap the estimation of the uncertainties is not fully determined. However, it does give promising results that are suggested for investigation in further work. / För att bygga en vindkraftspark är man i behov av att kartlägga vindresurserna i det aktuella området. Med hjälp av tidsserier från numeriska vädermodeller (NWP), globala assimileringsdatabaser och intilliggande observationer korrigeras de uppmätta vindhastigheterna och vindriktningarna för att motsvara långtidsvärdena av vindförhållandena. Dessa långtidskorrigeringsmetoder (LTC) genomförs generellt sett med hjälp av linjär regression i Mät-korrelera-predikera-metoden (MCP). Denna metod, och två andra metoder, Sektor-bin (SB) och Syntetiska tidsserier (ST), används i denna rapport för att utreda de osäkerheter som är knutna till långtidskorrigering.Det testområde som är valt för analys i denna rapport omfattas av Nordsjöregionen, med 22 meteorologiska väderobservationsstationer i Danmark, Norge och Sverige. Dessa stationer är till största del belägna till havs eller vid kusten. Tidsserierna som används täcker åttaårsperioden från 2002 till 2009, där det året med högst variabilitet i uppmätt vindhastighet, år 2007, används som den korta mätperiod som blir föremål för långtidskorrigeringen. De långa referensdataseten som använts är väderprediktionsmodellen WRF ( Weather Research and Forecast Model), baserad både på data från NCEP/FNL (National Centers for Environmental Prediciton Final Analysis) och ERA-Interim (ECMWF Interim Re-analysis). Dessutom används även data från MERRA (Modern Era Re-Analysis) och satellitobservationer från QuikSCAT. Långtidsperioden för alla dataset utom QuikSCAT omfattar samma period som observationsstationerna. QuikSCAT-datat som använts omfattar perioden 1 november 1999 till 31 oktober 2009.Analysen är indelad i tre delar. Inledningsvis behandlas osäkerheten som är kopplad till referensdatans ingående i långtidskorrigeringsmetoderna. Därefter analyseras osäkerhetens beroende av längden på den samtidiga datan i referens- och observationsdataseten. Slutligen utreds osäkerheten med hjälp av en icke-parametrisk metod, en s.k. Bootstrap: Osäkerheten i SB-metoden för en fast samtidig längd av tidsserierna från observationer och referensdatat uppskattas genom att skapa en generell modell som estimerar osäkerheten i estimatet.Resultatet visar att skillnaden när man använder WRF-modellen baserad både på NCEP/FNL och ERA-Interim i långtidskorrigeringen är marginell och avviker inte markant i förhållande till stationsobservationerna. Resultatet pekar också på att MERRA-datat kan användas som långtidsreferensdataset i långtidsdkorrigeringsmetoderna. Däremot ger inte QuikSCAT-datasetet tillräckligt med information för att avgöra om det går att använda i långtidskorrigeringsmetoderna. Därför föreslås ett annat tillvägagångssätt än stationsspecifika koordinater vid val av koordinater lämpliga för långtidskorrigering. Ytterligare ett resultat vid analys av långtidskorrigeringsmetoden SB, visar att metoden är robust mot variation i korrelationskoefficienten.Rörande osäkerhetens beroende av längden på samtidig data visar resultaten att en sammanhängande mätperiod på ett år eller mer ger den lägsta osäkerheten i årsmedelvindsestimatet, i förhållande till mätningar av kortare slag. Man kan även se att standardavvikelsen av de långtidskorrigerade medelvärdena avtar med längden på det samtidiga datat. Den implementerade ickeparametriska metoden Bootstrap, som innefattar sampling med återläggning, kan inte estimera osäkerheten till fullo. Däremot ger den lovande resultat som föreslås för vidare arbete.