Thesis advisor: Dunwei Wang / Electrochemical CO2 reduction reaction (CRR) provides a solution to both the increasing global demand of energy by forming valuable chemical products for fuel production, and global warming by reducing the amount of CO2 in the environment. To efficiently reduce CO2, we sought to understand the reaction mechanism using a polycrystalline Au electrode and the super concentrated LiTFSI solution (WiS) as the electrolyte. By varying both the electrolytic potential and the concentration of WiS, we investigated the factors determining product selectivity and found that reaction kinetics and mass transport together direct the selectivity towards CO. We probed the rate limiting step (RLS) of CO2 reduction by observing the variation of product distribution with water availability in solution, and discovered that the RLS was likely to involve only a single electron transfer to form COO*–. Lastly, we proposed that in WiS, H2O were the dominant proton sources for both CO2 reduction and H2 evolution reactions. In 21m WiS, the competing hydrogen evolution reaction was kinetically inhibited, so CO production was favored with a selectivity of 90% at a potential as early as -0.4V vs RHE. This study demonstrated the great potential of WiS as a platform for studying multi-proton, multi-electron transfer reactions. / Thesis (BS) — Boston College, 2018. / Submitted to: Boston College. College of Arts and Sciences. / Discipline: Scholar of the College. / Discipline: Chemistry.

ABSTRACT RATE-LIMITING STEP OF CONE PHOTOTRANSDUCTION RECOVERY AND OGUCHI DISEASE MECHANISMS By Frank Sungping Chen Advisor: Ching-Kang Jason Chen, Ph.D. Retinal photoreceptors provide the first gateway in which light information from the environment is transformed into neuronal signals. The cone and rod photoreceptors are responsible for day and night vision, respectively. Understanding rod and cone phototransduction is to figure out how these cells differ in their temporal and spatial sensitivities to allow perception of a broad dynamic range of stimuli. Phototransduction is mediated through a Gprotein signaling cascade. Light absorption by visual pigment triggers the isomerization of 11- cis-retinal covalently attached to these pigments, which are heptahelical transmembrane Gprotein- coupled receptors. Isomerization of 11-cis-retinal to all-trans-retinal activates the receptor, which catalyzes the exchange of GDP for GTP on the α subunit of heterotrimeric Gprotein called transducin. Activated transducin relieves inhibitory constraint on cGMP-PDE, leading to rapid hydrolysis of cGMP, closure of cGMP gated cation channels, and membrane hyperpolarization. In order for photoreceptor to be responsive to light again, this robust phototransduction pathway must be deactivated in a timely fashion and this involves several reactions simultaneously. First, the activated opsin must be phosphorylated by G-protein-coupled receptor kinases (GRKs) and capped by arrestin binding. Second, activated transducin must hydrolyze bound GTP through intrinsic GTPase activity, which is accelerated by a GTPase accelerating protein (GAP) complex comprised of RGS9-1/Gβ5-L/R9AP. Mutations in human genes involved in these reactions cause various visual defects. Cone, by and large, uses the same set of genes for pigment and transducin deactivations but it has lower sensitivity and faster kinetics than rod and is responsible for high visual acuity. During phototransduction recovery in which multiple reactions take place, the slowest reaction will determine the overall rate of recovery. In rod, this so-called, rate-limiting step has been determined to be transducin deactivation. It is unknown whether cone transducin deactivation also controls the timing of conerecovery, although we and others have shown that cone possesses a higher level of GAP concentration. In this thesis, the rate-limiting step in cone phototransduction recovery has been unequivocally determined by overexpressing RGS9-1 by 2.7 fold in mouse cones, which results in accelerated cone recovery. Complementarily, we find that ectopically expressing a human cone opsin kinase GRK7 in mouse cones does not affect cone recovery. These results altogether demonstrate that the rate-limiting step of cone recovery is the GTP-hydrolysis of cone transducin, not the opsin phosphorylation by GRKs. By elucidating the rate-limiting step of photoreceptor recovery, we have revealed the importance of G-protein cycling in timing of both rod and cone photoreceptors. This may further be generalized to other physiological processes controlled by heterotrimeric G-proteins. The proper shutoff of phototransduction is essential for normal vision as recovery defects lead to visual impairment. Even though the reaction catalyzed by GRK1 is not rate-limiting, mutations of this important gene render rhodopsin phosphorylation and deactivation the slowest step in rod recovery and create a pathological condition. GRK1 mutations have been found in Oguchi disease patients, who suffer from congenital stationary night blindness. One of the mutations, V380D, is investigated in detail in this study. Transgenic expression of GRK1 V380D mutant in rods reveals a kinase with reduced expression and catalytic activity. While V380D GRK1 is found capable of inactivating rhodopsin, the reduction in kinase activity leads to a delayed dark adaptation, and is congruent with the night blindness phenotype observed in Oguchi disease patients. Finally, we have also investigated the role of post-translational isoprenylation on GRK1 function. We found that isoprenylation is required for GRK1 membrane association and outer segment targeting. Altogether our data add significantly to understanding the structure and function of GRK1, which is one of the least understood molecules involved in vertebrate phototransduction.

High temperature proton conducting perovskite oxides are very attractive materials for applications in electrochemical devices, such as solid oxide fuel cells (SOFCs) and hydrogen permeation membranes. A better understanding of the hydrogen oxidation mechanism over the metal/proton conductor interface, is critical for rational design to further enhance the performances of the applications. However, kinetic studies focused on the metal/proton system are limited, compared with the intensively studied metal/oxygen ion conductor system, e.g., Ni/YSZ (yttrium stabilized zirconia, Zr₁-ₓYₓO₂-δ). This work presents an elementary kinetic model developed to assess reaction pathway of hydrogen oxidation/reduction on metal/proton conductor interface. Individual rate expressions and overall hydrogen partial pressure dependencies of current density and polarization resistance were derived in different rate limiting cases. The model is testified by tailored experiments on Pt/BaZr₀.₁Ce₀.₇Y₀.₁Yb₀.₁O₃-δ (BZCYYb) interface using pattern electrodes. Comparison of electrochemical testing and the theoretical predictions indicates the dissociation of hydrogen is the rate-limiting step (RLS), instead of charge transfer, displaying behavior different from metal/oxygen ion conductor interfaces. The kinetic model presented in this thesis is validated by high quantitative agreement with experiments under various conditions. The discovery not only contributes to the fundamental understanding of the hydrogen oxidation kinetics over metal/proton conductors, but provides insights for rational design of hydrogen oxidation catalysts in a variety of electrochemical systems.

<p dir="ltr">To decrease the use of fossil fuels that generate greenhouse gases, there has been a push to find alternative processes for electricity generation. An attractive renewable alternative is to use solar-thermal energy for grid level electricity production. One method used to generate electricity from the conversion of solar-thermal energy is concentrated solar power (CSP) via the power tower paradigm, which involves an array of mirrors that concentrate sunlight to a spot on a tower. The light heats up a heat transfer fluid which later transfers the thermal energy to a working fluid that expands so as to spin a turbine to generate electricity. Current CSP plants have a peak operation temperature of 550℃, but improvements to the heat exchanger are integral to increasing the peak operation temperature of such plants to a 750℃ target. Ceramic/metal composites (cermets) have been proposed for use as heat exchangers in these CSP plants due to the creep resistance of the ceramic component and toughness of the metal component. One potential material that has an attractive combination of properties for this application is the alumina/chromium (Al2O3/Cr) cermet, given the rigidity and creep resistance of the Al2O3 component and the high-temperature toughness of the Cr phase. Compared to other oxidation-resistant oxide/metal cermets, the Al2O3 and Cr components of this cermet have a relatively close average linear thermal expansion match from 25℃ to 750℃, which is advantageous due to the thermal gradients and thermal cycling of the heat exchanger during operation.</p><p dir="ltr">In this dissertation, the Al2O3/Cr cermet was produced via reaction forming (RF) or reactive melt infiltration (RMI). The RF method involves the reaction of Cr2O3 and Al constituent powder mixtures at high temperature and modest pressures to obtain dense Al2O3/Cr plates. The RMI method involves immersing a shaped porous Cr2O3 preform into an Al or Al-Cr alloy bath to infiltrate and react to form Al2O3/Al-Cr plates. For both methods, the plate microstructure was analyzed for the various reaction conditions. The adiabatic temperature increase for the reaction between Cr2O3 and Al liquid or Al-Cr liquid alloys was calculated. Thermal properties (linear coefficient of thermal expansion, heat capacity, thermal diffusivity, thermal conductivity) and mechanical properties for the RF Al2O3/Cr plates were also measured. Lastly, the reaction kinetics between dense, polycrystalline Cr2O3 and a liquid Al-35at% Cr alloy were experimentally determined at various temperatures and compared to models based on different rate-limiting steps.</p>

This thesis presents a research project in the field of oxygen system fire safety relating to the heterogeneous burning of iron in normal gravity and reduced gravity. Fires involving metallic components in oxygen systems often occur, with devastating and costly results, motivating continued research to improve the safety of these devices through a better understanding of the burning phenomena. Metallic materials typically burn in the liquid phase, referred to as heterogeneous burning. A review of the literature indicates that there is a need to improve the overall understanding of heterogeneous burning and better understand the factors that influence metal flammability in normal gravity and reduced gravity. Melting rates for metals burning in reduced gravity have been shown to be higher than those observed under similar conditions in normal gravity, indicating that there is a need for further insight into heterogeneous burning, especially in regard to the rate-limiting mechanism. The objective of the current research is to determine the cause of the higher melting rates observed for metals burning in reduced gravity to (a) identify the rate-limiting mechanism during heterogeneous burning and thus contribute to an improved fundamental understanding of the system, and (b) contribute to improved oxygen system fire safety for both ground-based and space-based applications. In support of the work, a 2-s duration ground-based drop tower reduced-gravity facility was commissioned and a reduced-gravity metals combustion test system was designed, constructed, commissioned and utilised. These experimental systems were used to conduct tests involving burning 3.2-mm diameter cylindrical iron rods in high-pressure oxygen in normal gravity and reduced gravity. Experimental results demonstrate that at the onset of reduced gravity, the burning liquid droplet rapidly attains a spherical shape and engulfs the solid rod, and that this is associated with a rapid increase in the observed melting rate. This link between the geometry of the solid/liquid interface and melting rate during heterogeneous burning is of particular interest in the current research. Heat transfer analysis was performed and shows that a proportional relationship exists between the surface area of the solid/liquid interface and the observed melting rate. This is confirmed through detailed microanalysis of quenched samples that shows excellent agreement between the proportional change in interfacial surface area and the observed melting rate. Thus, it is concluded that the increased melting rates observed for metals burning in reduced gravity are due to altered interfacial geometry, which increases the contact area for heat transfer between the liquid and solid phases. This leads to the conclusion that heat transfer across the solid/liquid interface is the rate-limiting mechanism for melting and burning, limited by the interfacial surface area. This is a fundamental result that applies in normal gravity and reduced gravity and clarifies that oxygen availability, as postulated in the literature, is not rate limiting. It is also established that, except for geometric changes at the solid/liquid interface, the heterogeneous burning phenomenon is the same at each gravity level. A conceptual framework for understanding and discussing the many factors that influence heterogeneous burning is proposed, which is relevant to the study of burning metals and to oxygen system fire safety in both normal-gravity and reduced-gravity applications.