The context of this thesis is the numerical simulation of turbulent flows at moderate Reynolds numbers and the improvement of the capabilities of an in-house 3D unsteady and incompressible flow solver called SFELES to simulate such flows. In addition to this abstract, this thesis includes five other chapters. The second chapter of this thesis presents the numerical methods implemented in the two CFD solvers used as part of this work, namely SFELES and PHASTA. The third chapter concentrates on the implementation of a new library called FlexMG. This library allows the use of various types of iterative solvers preconditioned by algebraic multigrid methods, which require much less memory to solve linear systems than a direct sparse LU solver available in SFELES. Multigrid is an iterative procedure that relies on a series of increasingly coarser approximations of the original 'fine' problem. The underlying concept is the following: low wavenumber errors on fine grids become high wavenumber errors on coarser levels, which can be effectively removed by applying fixed-point methods on coarser levels. Two families of algebraic multigrid preconditioners have been implemented in FlexMG, namely smooth aggregation-type and non-nested finite element-type. Unlike pure gridless multigrid, both of these families use the information contained in the initial fine mesh. A hierarchy of coarse meshes is also needed for the non-nested finite element-type multigrid so that our approaches can be considered as hybrid. Our aggregation-type multigrid is smoothed with either a constant or a linear least square fitting function, whereas the non-nested finite element-type multigrid is already smooth by construction. All these multigrid preconditioners are tested as stand-alone solvers or coupled with a GMRES (Generalized Minimal RESidual) method. After analyzing the accuracy of the solutions obtained with our solvers on a typical test case in fluid mechanics (unsteady flow past a circular cylinder at low Reynolds number), their performance in terms of convergence rate, computational speed and memory consumption is compared with the performance of a direct sparse LU solver as a reference. Finally, the importance of using smooth interpolation operators is also underlined in this work. The fourth chapter is devoted to the study of subgrid scale models for the large eddy simulation (LES) of turbulent flows. It is well known that turbulence features a cascade process by which kinetic energy is transferred from the large turbulent scales to the smaller ones. Below a certain size, the smallest structures are dissipated into heat because of the effect of the viscous term in the Navier-Stokes equations. In the classical formulation of LES models, all the resolved scales are used to model the contribution of the unresolved scales. However, most of the energy exchanges between scales are local, which means that the energy of the unresolved scales derives mainly from the energy of the small resolved scales. In this fourth chapter, constant-coefficient-based Smagorinsky and WALE models are considered under different formulations. This includes a classical version of both the Smagorinsky and WALE models and several scale-separation formulations, where the resolved velocity field is filtered in order to separate the small turbulent scales from the large ones. From this separation of turbulent scales, the strain rate tensor and/or the eddy viscosity of the subgrid scale model is computed from the small resolved scales only. One important advantage of these scale-separation models is that the dissipation they introduce through their subgrid scale stress tensor is better controlled compared to their classical version, where all the scales are taken into account without any filtering. More precisely, the filtering operator (based on a top hat filter in this work) allows the decomposition u' = u - ubar, where u is the resolved velocity field (large and small resolved scales), ubar is the filtered velocity field (large resolved scales) and u' is the small resolved scales field. At last, two variational multiscale (VMS) methods are also considered. The philosophy of the variational multiscale methods differs significantly from the philosophy of the scale-separation models. Concretely, the discrete Navier-Stokes equations have to be projected into two disjoint spaces so that a set of equations characterizes the evolution of the large resolved scales of the flow, whereas another set governs the small resolved scales. Once the Navier-Stokes equations have been projected into these two spaces associated with the large and small scales respectively, the variational multiscale method consists in adding an eddy viscosity model to the small scales equations only, leaving the large scales equations unchanged. This projection is obvious in the case of a full spectral discretization of the Navier-Stokes equations, where the evolution of the large and small scales is governed by the equations associated with the low and high wavenumber modes respectively. This projection is more complex to achieve in the context of a finite element discretization. For that purpose, two variational multiscale concepts are examined in this work. The first projector is based on the construction of aggregates, whereas the second projector relies on the implementation of hierarchical linear basis functions. In order to gain some experience in the field of LES modeling, some of the above-mentioned models were implemented first in another code called PHASTA and presented along with SFELES in the second chapter. Finally, the relevance of our models is assessed with the large eddy simulation of a fully developed turbulent channel flow at a low Reynolds number under statistical equilibrium. In addition to the analysis of the mean eddy viscosity computed for all our LES models, comparisons in terms of shear stress, root mean square velocity fluctuation and mean velocity are performed with a fully resolved direct numerical simulation as a reference. The fifth chapter of the thesis focuses on the numerical simulation of the 3D turbulent flow over a re-entry Apollo-type capsule at low speed with SFELES. The Reynolds number based on the heat shield is set to Re=10^4 and the angle of attack is set to 180º, that is the heat shield facing the free stream. Only the final stage of the flight is considered in this work, before the splashdown or the landing, so that the incompressibility hypothesis in SFELES is still valid. Two LES models are considered in this chapter, namely a classical and a scale-separation version of the WALE model. Although the capsule geometry is axisymmetric, the flow field in its wake is not and induces unsteady forces and moments acting on the capsule. The characterization of the phenomena occurring in the wake of the capsule and the determination of their main frequencies are essential to ensure the static and dynamic stability during the final stage of the flight. Visualizations by means of 3D isosurfaces and 2D slices of the Q-criterion and the vorticity field confirm the presence of a large meandering recirculation zone characterized by a low Strouhal number, that is St≈0.15. Due to the detachment of the flow at the shoulder of the capsule, a resulting annular shear layer appears. This shear layer is then affected by some Kelvin-Helmholtz instabilities and ends up rolling up, leading to the formation of vortex rings characterized by a high frequency. This vortex shedding depends on the Reynolds number so that a Strouhal number St≈3 is detected at Re=10^4. Finally, the analysis of the force and moment coefficients reveals the existence of a lateral force perpendicular to the streamwise direction in the case of the scale-separation WALE model, which suggests that the wake of the capsule may have some preferential orientations during the vortex shedding. In the case of the classical version of the WALE model, no lateral force has been observed so far so that the mean flow is thought to be still axisymmetric after 100 units of non-dimensional physical time. Finally, the last chapter of this work recalls the main conclusions drawn from the previous chapters.

The context of this thesis is the numerical simulation of turbulent flows at moderate Reynolds numbers and the improvement of the capabilities of an in-house 3D unsteady and incompressible flow solver called SFELES to simulate such flows.<p>In addition to this abstract, this thesis includes five other chapters.<p><p>The second chapter of this thesis presents the numerical methods implemented in the two CFD solvers used as part of this work, namely SFELES and PHASTA.<p><p>The third chapter concentrates on the implementation of a new library called FlexMG. This library allows the use of various types of iterative solvers preconditioned by algebraic multigrid methods, which require much less memory to solve linear systems than a direct sparse LU solver available in SFELES. Multigrid is an iterative procedure that relies on a series of increasingly coarser approximations of the original 'fine' problem. The underlying concept is the following: low wavenumber errors on fine grids become high wavenumber errors on coarser levels, which can be effectively removed by applying fixed-point methods on coarser levels.<p>Two families of algebraic multigrid preconditioners have been implemented in FlexMG, namely smooth aggregation-type and non-nested finite element-type. Unlike pure gridless multigrid, both of these families use the information contained in the initial fine mesh. A hierarchy of coarse meshes is also needed for the non-nested finite element-type multigrid so that our approaches can be considered as hybrid. Our aggregation-type multigrid is smoothed with either a constant or a linear least square fitting function, whereas the non-nested finite element-type multigrid is already smooth by construction. All these multigrid preconditioners are tested as stand-alone solvers or coupled with a GMRES (Generalized Minimal RESidual) method. After analyzing the accuracy of the solutions obtained with our solvers on a typical test case in fluid mechanics (unsteady flow past a circular cylinder at low Reynolds number), their performance in terms of convergence rate, computational speed and memory consumption is compared with the performance of a direct sparse LU solver as a reference. Finally, the importance of using smooth interpolation operators is also underlined in this work.<p><p>The fourth chapter is devoted to the study of subgrid scale models for the large eddy simulation (LES) of turbulent flows.<p>It is well known that turbulence features a cascade process by which kinetic energy is transferred from the large turbulent scales to the smaller ones. Below a certain size, the smallest structures are dissipated into heat because of the effect of the viscous term in the Navier-Stokes equations.<p>In the classical formulation of LES models, all the resolved scales are used to model the contribution of the unresolved scales. However, most of the energy exchanges between scales are local, which means that the energy of the unresolved scales derives mainly from the energy of the small resolved scales.<p>In this fourth chapter, constant-coefficient-based Smagorinsky and WALE models are considered under different formulations. This includes a classical version of both the Smagorinsky and WALE models and several scale-separation formulations, where the resolved velocity field is filtered in order to separate the small turbulent scales from the large ones. From this separation of turbulent scales, the strain rate tensor and/or the eddy viscosity of the subgrid scale model is computed from the small resolved scales only. One important advantage of these scale-separation models is that the dissipation they introduce through their subgrid scale stress tensor is better controlled compared to their classical version, where all the scales are taken into account without any filtering. More precisely, the filtering operator (based on a top hat filter in this work) allows the decomposition u' = u - ubar, where u is the resolved velocity field (large and small resolved scales), ubar is the filtered velocity field (large resolved scales) and u' is the small resolved scales field. <p>At last, two variational multiscale (VMS) methods are also considered.<p>The philosophy of the variational multiscale methods differs significantly from the philosophy of the scale-separation models. Concretely, the discrete Navier-Stokes equations have to be projected into two disjoint spaces so that a set of equations characterizes the evolution of the large resolved scales of the flow, whereas another set governs the small resolved scales. <p>Once the Navier-Stokes equations have been projected into these two spaces associated with the large and small scales respectively, the variational multiscale method consists in adding an eddy viscosity model to the small scales equations only, leaving the large scales equations unchanged. This projection is obvious in the case of a full spectral discretization of the Navier-Stokes equations, where the evolution of the large and small scales is governed by the equations associated with the low and high wavenumber modes respectively. This projection is more complex to achieve in the context of a finite element discretization. <p>For that purpose, two variational multiscale concepts are examined in this work.<p>The first projector is based on the construction of aggregates, whereas the second projector relies on the implementation of hierarchical linear basis functions.<p>In order to gain some experience in the field of LES modeling, some of the above-mentioned models were implemented first in another code called PHASTA and presented along with SFELES in the second chapter.<p>Finally, the relevance of our models is assessed with the large eddy simulation of a fully developed turbulent channel flow at a low Reynolds number under statistical equilibrium. In addition to the analysis of the mean eddy viscosity computed for all our LES models, comparisons in terms of shear stress, root mean square velocity fluctuation and mean velocity are performed with a fully resolved direct numerical simulation as a reference.<p><p>The fifth chapter of the thesis focuses on the numerical simulation of the 3D turbulent flow over a re-entry Apollo-type capsule at low speed with SFELES. The Reynolds number based on the heat shield is set to Re=10^4 and the angle of attack is set to 180º, that is the heat shield facing the free stream. Only the final stage of the flight is considered in this work, before the splashdown or the landing, so that the incompressibility hypothesis in SFELES is still valid.<p>Two LES models are considered in this chapter, namely a classical and a scale-separation version of the WALE model. Although the capsule geometry is axisymmetric, the flow field in its wake is not and induces unsteady forces and moments acting on the capsule. The characterization of the phenomena occurring in the wake of the capsule and the determination of their main frequencies are essential to ensure the static and dynamic stability during the final stage of the flight. <p>Visualizations by means of 3D isosurfaces and 2D slices of the Q-criterion and the vorticity field confirm the presence of a large meandering recirculation zone characterized by a low Strouhal number, that is St≈0.15.<p>Due to the detachment of the flow at the shoulder of the capsule, a resulting annular shear layer appears. This shear layer is then affected by some Kelvin-Helmholtz instabilities and ends up rolling up, leading to the formation of vortex rings characterized by a high frequency. This vortex shedding depends on the Reynolds number so that a Strouhal number St≈3 is detected at Re=10^4.<p>Finally, the analysis of the force and moment coefficients reveals the existence of a lateral force perpendicular to the streamwise direction in the case of the scale-separation WALE model, which suggests that the wake of the capsule may have some <p>preferential orientations during the vortex shedding. In the case of the classical version of the WALE model, no lateral force has been observed so far so that the mean flow is thought to be still axisymmetric after 100 units of non-dimensional physical time.<p><p>Finally, the last chapter of this work recalls the main conclusions drawn from the previous chapters. / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished