Spelling suggestions: "subject:"reaction word""
1 |
Examples of Spiral Compression WoodDouglass, A. E. 01 1900 (has links)
No description available.
|
2 |
Plant hormones in wood formation : novel insights into the roles of ethylene and gibberellins /Björklund, Simon, January 2007 (has links) (PDF)
Diss. (sammanfattning) Umeå : Sveriges lantbruksuniv., 2007. / Härtill 4 uppsatser.
|
3 |
New approaches to wood quality assessmentSharma, Monika January 2013 (has links)
This study approaches wood quality in young trees by very early screening – and consequent selection for propagation – on the basis of physical and mechanical properties.
In chapter 1 corewood properties are reviewed and the importance and problems associated with early screening are discussed. Due to randomly distributed reaction wood in young trees it is advantageous to lean trees to avoid intermixing of the two wood types and minimise any uncertainty in the results.
In chapter 2 physical and mechanical properties are described for opposite and compression wood in a population of Pinus radiata comprising of 50 families, at a young (<3 years) age. The dynamic stiffness was determined using the resonance acoustic technique. Density was measured using water displacement method, and longitudinal and volumetric shrinkage were measured from green to ~5% moisture content. The compression wood and opposite wood differ significantly in all the measured properties. Compression wood was characterised by high density and high longitudinal shrinkage. The mean stiffness of opposite wood was 3.0 GPa with a mean standard deviation of 0.39, and the mean longitudinal shrinkage of opposite wood was 0.99% with mean standard deviation of 0.31 across the samples examined. This variation in stiffness and longitudinal shrinkage in opposite wood can be exploited to screen for wood quality. The variation in stiffness and longitudinal shrinkage within a family was comparable to variation among families. In spite of large within site variability it was possible to distinguish between the worst and the best families in opposite wood at young age.
In chapter 3 ranking of selected families of Pinus radiata was done based on microfibril angle, which is considered as the main factor influencing both stiffness and longitudinal shrinkage. The ranking was compared with ranking done using acoustic velocity which is more practical and fast method of screening trees. The mean MFA in opposite wood was 39° with a mean standard deviation of 3.7 and in compression wood the mean MFA was 44° with a mean standard deviation of 2.9. The variation in MFA in opposite wood offers opportunities to breed for trees with low MFA. A strong negative correlation (R=-0.68) between acoustic velocity squared and MFA in opposite wood suggested that the resonance technique can be used effectively to screen very young wood rather than using MFA.
At high MFA, the cell wall matrix also plays an important role in determining the mechanical and physical properties of the wood. At present the chemical composition of wood samples is determined by wet chemical analysis, which is time consuming and laborious. Therefore, it is impractical to characterise large numbers of samples. Mechanical properties, particularly tanδ (dissipation of energy), which changes with temperature and frequency as the structure of the material changes at the molecular level, was studied using dynamic mechanical analysis (DMA). The idea was to assess if it can be used as a quality trait for tree screening instead of wet chemical analysis. Compression wood and opposite wood were characterised for storage modulus and tanδ at constant moisture content. In practice the instrument used, TA instrument Q800, was unable to provide the desired range of temperature and humidity so no glass transition at 9% moisture content in the temperature range of 10°C to 85°C at 1 and 10 Hz frequency was observed that might be attributed to the hemicelluloses (or lignin). In spite of the huge difference in chemical composition of opposite and compression wood, the difference in their mean tanδ at 25°C and 1 Hz values was just 7%. The positive correlation between MFA and tanδ in opposite wood suggested that MFA also plays a role in the dissipation of energy. The strong relationship between storage modulus and dynamic modulus (R=0.74) again justifies the reliability of resonance technique to screen young wood for stiffness.
Concurrently eighty seven, two-year-old leant Eucalyptus regnans were studied for growth strains along with other physical and mechanical properties, independently in tension and opposite wood. The leant trees in Eucalyptus regnans vary in their average growth strain. Strong correlation between measured and calculated strain (R=0.93) suggests that the quick split method can be used to screen large populations for growth stresses. Tension wood was characterised by high density and was three times stiffer than opposite wood and twice as high in volumetric shrinkage. The high longitudinal shrinkage in opposite wood could be due to comparatively high MFAs in opposite wood of the young trees. There was no correlation between growth strain values and other measured properties in opposite wood. It is possible to screen for growth strain at age two, without any adverse effect on stiffness and shrinkage properties.
|
4 |
An investigation into mechanisms of shoot bending in a clone of Populus tremuloides exhibiting 'crooked' architectureLinden, Ashley Wade 28 March 2006 (has links)
Populus tremuloides Michx. (trembling aspen) is a tree species native to much of North America, characterized by an excurrent crown with horizontal to ascending branches and a dominant terminal leader. An unusual clone of trembling aspen was discovered in the 1940s near Hafford, Saskatchewan. This clone demonstrates abnormal crown morphology, in which vigorous shoots bend down, ultimately leading to an overall twisted or crooked appearance. The objectives of the present study were to investigate the mechanism of shoot bending by (1) characterizing the process and timing of bending, (2) evaluating structural aspects of developing wild-type and crooked aspen shoots, and (3) comparing anatomical features of bending shoots with wild-type shoots. L-system reconstruction models of 3-D digitized shoot development revealed dramatic bending midway through the growing season. Morphological analyses revealed that crooked aspen shoots had greater taper compared to the wild-type, typically known to create shoots resist deflection and bending. However, preliminary strength analyses indicated that crooked aspen shoots were less rigid, with smaller values of Young’s modulus compared to wild-type shoots. Anatomical investigations revealed differences in several structural tissues between developing wild-type and crooked aspen shoots, and differences within crooked aspen shoots. Primary phloem fibres on the upper side of bending shoots maintained relatively large lumens while those on the lower side were fully lignified, similar to those of mature vertically oriented wild-type leader shoots. These differences may result in differential extension growth early in development, and/or uneven mechanical support later on, ultimately resulting in bending due to self-weight. Gelatinous fibres (G-fibres), characteristic of tension wood (TW), were found throughout older wild-type and vertically oriented crooked aspen shoots; however, G-fibres were only found on the lower side of crooked aspen shoots. These lateral differences could have contributed to shoot bending by actively bending shoots downwards, or lack of TW on the upper side may not have prevented biomechanical bending from self weight. Nevertheless, shoot bending stops at the end of the growing season, suggesting that the mechanisms involved in creating bent shoots are only functional during the first growing season. / February 2006
|
5 |
An investigation into mechanisms of shoot bending in a clone of Populus tremuloides exhibiting 'crooked' architectureLinden, Ashley Wade 28 March 2006 (has links)
Populus tremuloides Michx. (trembling aspen) is a tree species native to much of North America, characterized by an excurrent crown with horizontal to ascending branches and a dominant terminal leader. An unusual clone of trembling aspen was discovered in the 1940s near Hafford, Saskatchewan. This clone demonstrates abnormal crown morphology, in which vigorous shoots bend down, ultimately leading to an overall twisted or crooked appearance. The objectives of the present study were to investigate the mechanism of shoot bending by (1) characterizing the process and timing of bending, (2) evaluating structural aspects of developing wild-type and crooked aspen shoots, and (3) comparing anatomical features of bending shoots with wild-type shoots. L-system reconstruction models of 3-D digitized shoot development revealed dramatic bending midway through the growing season. Morphological analyses revealed that crooked aspen shoots had greater taper compared to the wild-type, typically known to create shoots resist deflection and bending. However, preliminary strength analyses indicated that crooked aspen shoots were less rigid, with smaller values of Young’s modulus compared to wild-type shoots. Anatomical investigations revealed differences in several structural tissues between developing wild-type and crooked aspen shoots, and differences within crooked aspen shoots. Primary phloem fibres on the upper side of bending shoots maintained relatively large lumens while those on the lower side were fully lignified, similar to those of mature vertically oriented wild-type leader shoots. These differences may result in differential extension growth early in development, and/or uneven mechanical support later on, ultimately resulting in bending due to self-weight. Gelatinous fibres (G-fibres), characteristic of tension wood (TW), were found throughout older wild-type and vertically oriented crooked aspen shoots; however, G-fibres were only found on the lower side of crooked aspen shoots. These lateral differences could have contributed to shoot bending by actively bending shoots downwards, or lack of TW on the upper side may not have prevented biomechanical bending from self weight. Nevertheless, shoot bending stops at the end of the growing season, suggesting that the mechanisms involved in creating bent shoots are only functional during the first growing season.
|
6 |
An investigation into mechanisms of shoot bending in a clone of Populus tremuloides exhibiting 'crooked' architectureLinden, Ashley Wade 28 March 2006 (has links)
Populus tremuloides Michx. (trembling aspen) is a tree species native to much of North America, characterized by an excurrent crown with horizontal to ascending branches and a dominant terminal leader. An unusual clone of trembling aspen was discovered in the 1940s near Hafford, Saskatchewan. This clone demonstrates abnormal crown morphology, in which vigorous shoots bend down, ultimately leading to an overall twisted or crooked appearance. The objectives of the present study were to investigate the mechanism of shoot bending by (1) characterizing the process and timing of bending, (2) evaluating structural aspects of developing wild-type and crooked aspen shoots, and (3) comparing anatomical features of bending shoots with wild-type shoots. L-system reconstruction models of 3-D digitized shoot development revealed dramatic bending midway through the growing season. Morphological analyses revealed that crooked aspen shoots had greater taper compared to the wild-type, typically known to create shoots resist deflection and bending. However, preliminary strength analyses indicated that crooked aspen shoots were less rigid, with smaller values of Young’s modulus compared to wild-type shoots. Anatomical investigations revealed differences in several structural tissues between developing wild-type and crooked aspen shoots, and differences within crooked aspen shoots. Primary phloem fibres on the upper side of bending shoots maintained relatively large lumens while those on the lower side were fully lignified, similar to those of mature vertically oriented wild-type leader shoots. These differences may result in differential extension growth early in development, and/or uneven mechanical support later on, ultimately resulting in bending due to self-weight. Gelatinous fibres (G-fibres), characteristic of tension wood (TW), were found throughout older wild-type and vertically oriented crooked aspen shoots; however, G-fibres were only found on the lower side of crooked aspen shoots. These lateral differences could have contributed to shoot bending by actively bending shoots downwards, or lack of TW on the upper side may not have prevented biomechanical bending from self weight. Nevertheless, shoot bending stops at the end of the growing season, suggesting that the mechanisms involved in creating bent shoots are only functional during the first growing season.
|
7 |
Instability in plantations of container-grown Scots pine and consequences on stem form and wood properties /Rune, Göran, January 2003 (has links)
Diss. (sammanfattning). Uppsala : Sveriges lantbruksuniv., 2003. / Härtill 4 uppsatser.
|
8 |
Compression wood in Scots pine and Norway spruce : distribution in relation to external geometry and the impact on dimensional stability in sawn wood /Warensjö, Mats, January 2003 (has links) (PDF)
Diss. (sammanfattning). Umeå : Sveriges lantbruksuniv., 2003. / Härtill 5 uppsatser.
|
9 |
Wood formation and transcript analysis with focus on tension wood and ethylene biology /Andersson Gunnerås, Sara, January 2005 (has links) (PDF)
Diss. (sammanfattning) Umeå : Sveriges lantbruksuniversitet, 2005. / Härtill 4 uppsatser.
|
10 |
Ethylene and auxin in the control of wood formation /Hellgren, Jenny Maria, January 2003 (has links) (PDF)
Diss. (sammanfattning) Umeå : Sveriges lantbruksuniv., 2003. / Härtill 4 uppsatser.
|
Page generated in 0.1007 seconds