Cartas al Editor

No description available.

Permeable reactive biobarrier (PRBB) is a flow-through zone where microorganisms degrade contaminants in groundwater. Discontinuous presence of contaminants in groundwater causes performance loss of a PRBB in removing the target contaminant. A novel enricher reactor (ER) - PRBB system was developed to treat groundwater with contaminants that reappear after an absence period. ER is an offline reactor for enriching contaminant degraders, which were used for augmenting PRBB to maintain its performance after a period of contaminant absence. The ER-PRBB concept was initially applied to remove benzene that reappeared after absence periods of 10 and 25 days. PRBBs without ER augmentation experienced performance losses of up to 15% higher than ER-PRBBs. The role of inducer compounds in the ER to enrich bacteria that can degrade a mixture of benzene, toluene, ethylbenzene, and xylene (BTEX) was investigated with an objective to minimize the use of toxic chemicals as inducers. Three inducer types were studied: individual BTEX compounds, BTEX mixture, and benzoate (a non toxic and a common intermediate for BTEX biodegradation). Complete BTEX removal was observed for degraders enriched on all three inducer types; however, the removal rates were dependent on the inducer type. Degraders enriched on toluene and BTEX had the highest degradation rates for BTEX of 0.006 to 0.014 day-1 and 0.006 to 0.012 day-1, respectively, while degraders enriched on benzoate showed the lowest degradation rates of 0.004 to 0.009 day-1. The ER-PRBB technique was finally applied to address the performance loss of a PRBB due to inhibition interactions among BTEX, when the mixture reappeared after a 10 day absence period. The ER-PRBBs experienced minimal to no performance loss, while PRBBs without ER augmentation experienced performance losses between 11% and 35%. Presence of ethanol during the BTEX absence period increased the performance loss of PRBB for benzene removal. PRBBs augmented with degraders enriched on toluene alone overcame the inhibition interaction between benzene and toluene indicating that toluene can be used as a single effective inducer in an ER. The ER-PRBB was demonstrated to be a promising remediation technique and has potential for applications to a wide range of organic contaminants.

archives@tulane.edu / Reactive Cavitation Erosion (RCE), a new materials processing technique for the production of functionalized nanomaterials in which acoustic cavitation erosion is performed in a reactive medium, is described herein. Background material on acoustic cavitation erosion in the form of a literature review is presented. The effects of fluid properties and ambient pressure on the bubble dynamics at the high acoustic pressures commensurate with RCE are studied. The solutions to the Rayleigh-Plesset equation (RPE) and Keller-Miksis equation (KME) are compared. It is shown that to a first approximation, the RPE and KME give similar results. Analyses of the RPE solutions for real-world fluids reveal that many fluids result in cavitation intensity comparable to or greater than that of water. The groundwork for future modelling of RCE was established through the development of the Hemispherical Pit Model (HPM). The HPM is based upon a simple geometrical model of the volume loss process and contains parameters that may be more directly related to material properties and experimental parameters. Formation of functionalized clinoatacamite nanoparticles is achieved through Reactive Cavitation Erosion of copper discs in a 1 M guanidine hydrochloride solution. From analyses, the mechanism for formation of the clinoatacamite proceeded from ablation of metallic copper from the disc surface followed by subsequent reactions in solution. / 1 / Jeremy William Wright

This international workshop entitled “How to integrate geochemistry at affordable costs into reac-tive transport for large-scale systems” was organized by the Institute of Resource Ecology of the Helmholtz-Zentrum Dresden Rossendorf in Feb-ruary 2020. A mechanistic understanding and building on that an appropriate modelling of geochemical processes is essential for reliably predicting contaminant transport in groundwater systems, but also in many other cases where migration of hazardous substances is expected and consequently has to be assessed and limited. In case of already present contaminations, such modelling may help to quantify the threads and to support the development and application of suitable remediation measures. Typical application areas are nuclear waste disposal, environmental remediation, mining and milling, carbon capture & storage, or geothermal energy production. Experts from these fields were brought together to discuss large-scale reactive transport modelling (RTM) because the scales covered by such pre-dictions may reach up to one million year and dozens of kilometers. Full-fledged incorporation of geochemical processes, e.g. sorption, precipitation, or redox reactions (to name just a few important basic processes) will thus create inacceptable long computing times. As an effective way to integrate geochemistry at affordable costs into RTM different geochemical concepts (e.g. multidimensional look-up tables, surrogate functions, machine learning, utilization of uncertainty and sensitivity analysis etc.) exist and were extensively discussed throughout the workshop. During the 3-day program of the workshop keynote and regular lectures from experts in the field, a poster session, and a radio lab tour had been offered. In total, 40 scientists from 28 re-search institutes and 8 countries participated.

Aggression has traditionally been subdivided into two correlated, but distinct, subtypes: reactive and instrumental. Reactive aggression (RA) is considered impulsive, emotionally driven behavior, whereas instrumental aggression (IA) is planned and incentive-motivated. This thesis examines the relationships between RA, IA, psychopathy, and antisocial personality disorder (APD) symptoms in male and female offenders recruited from a jail in north Texas. Contrary to predictions, psychopathic traits did not account for more variance in aggression than did APD symptoms. Impulsivity demonstrated slight incremental validity over psychopathy for RA, and to a lesser degree, IA. the continued utility of the reactive-instrumental distinction and implications for professional practice in relation to the current study are examined. Study limitations and directions for future research are discussed.

The composites industry can be positively influenced by composite materials that are processed faster, are lighter in weight, are higher in stiffness and strength, and that are more recyclable. There has been considerable interest in the use of thermotropic liquid crystalline polymers (TLCPs) to reinforce thermoplastic materials. In a novel process developed by Baird and coworkers, wholly thermoplastic composites are produced via a patented, dual extrusion process. This unique process yields a fiber which consists of numerous continuous fibrils of the liquid crystalline polymer encased in a thermoplastic matrix. These fibers have been used to form random mats and woven pre-forms, which have then been compression molded to form composite parts. Because of the high cost associated with these thermotropic liquid crystalline polymers and the desire to generate recyclable composites, a process was developed in this research to separate the liquid crystalline component from polypropylene (PP) composites. The overall objectives of this work were to develop a process to reclaim the liquid crystalline component of these thermoplastic composites, to determine the effect the process had on the properties of the reclaimed liquid crystalline polymer, and finally to determine whether or not the reclaimed liquid crystalline polymer could be used again to generate a reinforcing component. An ancillary objective was to see if the polypropylene could also be reclaimed, and if it had further use as a polymeric resin. In the present work, a novel process was developed that allows the liquid crystalline component to be reclaimed for further use in the composite material or in other applications that require thermotropic liquid crystalline polymers. The polypropylene component, which has undergone molecular weight reduction, can also be reclaimed by this process. This process consisted of using an organic peroxide and reactive extrusion to selectively degrade only the polypropylene, and not the thermotropic liquid crystalline polymer. The degraded polypropylene was selectively dissolved away from the liquid crystalline polymer by stirring the extruded melt in boiling mineral oil. The remaining solids, of thermotropic liquid crystalline polymer, were collected via centrifugation, cleaned of the mineral oil by boiling in kerosene, and then dried in a convection oven. The purity of the reclaimed thermotropic liquid crystalline polymer was determined by density measurements, while the physical properties of the reclaimed material were determined by rheological tests. The mechanical properties were determined via Instron testing of injection molded plaques made from mixtures of reclaimed material and pure thermotropic liquid crystalline polymer. From this work, it was found that over 70 wt% of the thermotropic liquid crystalline polymer, DuPont HX8000, could be successfully separated from the polypropylene to a degree of 96.0%. From Instron testing, it was found that up to 40 wt% of the reclaimed HX8000 could be blended with the pure HX8000, with no loss in mechanical properties. Furthermore, it was seen that up to 83 % of the HX8000 component (40 wt%) of PP 6523 (60 wt%) composites could be replaced with reclaimed HX8000 without seeing any losses in mechanical properties. It was also found that the degraded polypropylene could be successfully separated, via centrifugation at a temperature of 253 K, and could be potentially used as resin for non-wovens. The projected material cost of the reclaimed HX8000, based on the ability to purchase and to process in bulk, was determined to be 90 % less than the virgin HX8000. / Master of Science

C-reactive protein (CRP) is an evolutionarily conserved protein, a component of the innate immune system, and an acute phase protein in humans. In addition to its raised level in blood in inflammatory states, CRP is also localized at sites of inflammation including atherosclerotic lesions, arthritic joints and amyloid plaque deposits. Results of in vivo experiments in animal models of inflammatory diseases indicate that CRP is an anti-pneumococcal, anti-atherosclerotic, anti-arthritic and an anti-amyloidogenic molecule. The mechanisms through which CRP functions in inflammatory diseases are not fully defined; however, the ligand recognition function of CRP in its native and non-native pentameric structural conformations and the complement-activating ability of ligand-complexed CRP have been suggested to play a role. One tool to understand the structure-function relationships of CRP and determine the contributions of the recognition and effector functions of CRP in host defense is to employ site-directed mutagenesis to create mutants for experimentation. For example, CRP mutants incapable of binding to phosphocholine are generated to investigate the importance of the phosphocholine-binding property of CRP in mediating host defense. Recombinant CRP mutants can be expressed in mammalian cells and, if expressed, can be purified from the cell culture media. While the methods to purify wild-type CRP are well established, different purification strategies are needed to purify various mutant forms of CRP if the mutant does not bind to either calcium or phosphocholine. In this article, we report the methods used to purify pentameric recombinant wild-type and mutant CRP expressed in and secreted by mammalian cells.

Turmeric extract or active component curcumin may have anti-inflammatory effects in people with chronic inflammatory diseases. The effect of turmeric or curcumin on a wide range of inflammatory markers has not been evaluated in a systematic review. We performed a systematic review of randomized controlled trials (RCTs)evaluating the effects of oral turmeric or curcumin on inflammatory markers (CRP, hsCRP, IL-1, IL-6, TNF)in patients with a wide range of chronic inflammatory diseases. Pubmed, EMBASE, Scopus, the Web of Science, and the Cochrane library were evaluated until June 2018. Random effects meta-analyses with inverse variance methods and stratified by turmeric or curcumin were performed. Effects were expressed as mean differences (MD)and their 95% confidence intervals (CI). Risk of bias of RCTs was evaluated with the Cochrane tool. Nineteen RCTs were identified; included patients had rheumatic diseases, advanced chronic kidney disease with hemodialysis, metabolic syndrome, and cardiovascular diseases. Turmeric was the intervention in 5 RCTs (n = 356)and curcumin/curcuminoids in 14 RCTs (n = 988). Follow up times ranged between 4 and 16 weeks. One RCT had high risk of bias. In comparison to controls, turmeric or curcumin did not significantly decrease levels of CRP (MD -2.71 mg/L, 95%CI -5.73 to 0.31, p = 0.08, 5 studies), hsCRP (MD -1.44 mg/L, 95%CI -2.94 to 0.06, p = 0.06, 6 studies), IL-1 beta (MD -4.25 pg/mL, 95%CI -13.32 to 4.82, p = 0.36, 2 studies), IL-6 (MD -0.71 pg/mL, 95%CI -1.68 to 0.25, p = 0.15), and TNF alpha (MD -1.23 pg/mL, 95%CI -3.01 to 0.55, p = 0.18, 7 studies). There were no differences between turmeric and curcumin interventions. High heterogeneity of effects was observed for all markers across studies, except hsCRP. Other inflammatory markers such as IL-1 alpha, TNF beta, IL-17, and IL-22 had scarce data. Turmeric or curcumin did not decrease several inflammatory markers in patients with chronic inflammatory diseases. / Revisión por pares

No description available.