Indiana University-Purdue University Indianapolis (IUPUI) / Hematopoietic stem cell (HSC) transplantation is a lifesaving therapy for a number of hematological disorders. However, to be effective, transplanted HSCs must efficiently “home” to supportive niches within the bone marrow. Limited HSC number and poor function are complications of transplant in some circumstances, and can lead to delayed engraftment and immune reconstitution, or in some cases, bone marrow failure. Enhancing HSC homing is a strategy to improve stem cell transplantation efficiency. We have previously shown that ex vivo treatment of mouse or human HSCs with 16-16 dimethyl PGE2 (dmPGE2) increases their bone marrow homing efficiency and engraftment, resulting in part from upregulation of surface CXCR4 expression. We now show that pulse-treatment of mouse or human HSPCs with dmPGE2 stabilizes HIF1α in HSPCs, and that similar treatment with the hypoxia mimetic DMOG produces analogous effects to dmPGE2 on HSPC CXCR4 expression and homing. This suggests that HIF1α is responsible for PGE2’s enhancing effects on HSPCs. Pharmacological inhibition of HIF1α stabilization in vitro with Sodium Nitroprusside (SNP), confirms the requirement of HIF1α for dmPGE2-enhanced migration and CXCR4 upregulation. Additionally, we confirm the requirement for HIF1α in dmPGE2-enhanced in vivo homing using a conditional knockout mouse model of HIF1α gene deletion. Finally, we validate that the hypoxia response element located 1.3kb from the transcriptional start site within the CXCR4 promoter is required for enhanced CXCR4 expression after PGE2 treatment. Interestingly, we also observe an increase in the small GTPase Rac1 after dmPGE2 treatment, as well as a defect in PGE2-enhanced migration and CXCR4 expression in Rac1 knockout HSPCs. Using state-of-the-art imaging technology we, confirm an increase in Rac1 and CXCR4 colocalization after dmPGE2 treatment that likely explains enhanced sensitivity of PGE2-treated HSPCs to SDF-1. Taken together, these results define a precise mechanism through which ex vivo pulse treatment of HSPC with dmPGE2 enhances HSPC function through alterations in cell motility and homing, and describe a role for hypoxia and HIF1α in enhancement of hematopoietic transplantation.

Indiana University-Purdue University Indianapolis (IUPUI) / The potential of hematopoietic stem cells (HSC) to home and to anchor within the bone marrow (BM) microenvironment controls the ability of transplanted HSCs to establish normal hematopoiesis. Activated Leukocyte Cell Adhesion Molecule (ALCAM; also identified as CD166), which participates in homophilic interactions, is expressed on a group of osteoblasts in the hematopoietic niche capable of sustaining functional HSC in vitro. Since we could also detect ALCAM expression on HSC, we suspect that ALCAM may play a role in anchoring primitive hematopoietic cells to ALCAM expressing components of the hematopoietic niche via dimerization. We investigated the role of ALCAM on the homing abilities of hematopoietic stem and progenitor cells (HSPC) by calculating recovery frequency of Sca-1+ALCAM+ cells in an in vivo murine bone marrow transplantation model. Our data supports the notion that ALCAM promotes improved homing potential of hematopoietic Sca-1+ cells. Recovery of BM-homed Sca-1+ cells from the endosteal region was 1.8-fold higher than that of total donor cells. However, a 3.0-fold higher number of Sca-1+ALCAM+ cells homed to the endosteal region compared to total donor cells. Similarly, homed Sca-1+ALCAM+ cells were recovered from the vascular region at 2.1-fold greater frequency than total homed donor cells from that region, compared to only a 1.3-fold increase in the recovery frequency of Sca-1+ cells. In vitro quantitation of clonogenic BM-homed hematopoietic progenitors corroborate the results from the homing assay. The frequency of in vitro clonogenic progenitors was significantly higher among endosteal-homed Sca-1+ALCAM+ cells compared to other fractions of donor cells. Collectively, these data demonstrate that engrafting HSC expressing ALCAM home more efficiently to the BM and within the BM microenvironment, these cells preferentially seed the endosteal niche.

D. Tech. (Department of Biotechnology and Chemistry, Faculty of Applied and Computer Sciences), Vaal University of Technology. / The synthesis of Ag and Cu nanoparticles was carried out using the thermal decomposition method in the presence of oleylamine as a capping agent. This method was used because it can produce uniform and monodisperse nanoparticles with controlled size distribution. The nanoparticles synthesized under various conditions were characterized by transmission electron microscopy (TEM), UV/Vis spectroscopy, photoluminescence spectroscopy (PL), and X-ray diffraction (XRD). The effect of precursor concentration on the morphology and size of the nanoparticles was investigated. It was observed that an increase in the precursor concentration resulted in an increase in particle sizes with different morphologies for both Ag and Cu nanoparticles. The increase in particle sizes for Ag nanoparticles was due to Ostwald ripening, while for Cu nanoparticles it was due to agglomeration, as Cu tends to oxidize in the atmosphere, leading to a change in particle size and shape. However, the ability to control and manipulate their physical and chemical properties depends on tuning their size and shape. Therefore, varying the precursor concentration helped in selecting the optimal concentration for this study. The nanoparticles produced were used in another study as fillers or additives for the production of nanofiber composites. The development of nanofibers by electrospinning process has led to potential applications in filtration, tissue engineering scaffolds, drug delivery, wound dressing and etc. The current study is an attempt to fabricate composite nanofibers that can be used as wound dressing material for effective wound healing. The approach involves the blending of two different polymers both being biocompatible and biodegradable were one is a natural polymer and the other is a synthetic polymer. In this study, different weight ratios of CS/PVA blends, Ag/Cu/CS/PVA, Ag/CS/PVA and Cu/CS/PVA composite fibers have been successfully prepared by the electrospinning process. The tip-to-collector distance was kept at 15 cm and the applied voltage was varied from 15 to 25 kV. The effects of the weight ratios applied voltage and the nanoparticles loading on the morphology and diameter of the fibers were investigated. The resultant fibers were characterized using scanning electron microscopy (SEM), XRD, Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric analysis (TGA) and UV-Vis spectroscopy. The SEM results showed that an increase the amount of chitosan in the CS/PVA blend resulted in a decrease in the fiber diameters while an increase in the voltage from 15 to 25 kV led to a decrease in the fiber diameters. Furthermore, an increase in fiber diameters was observed with irregular morphologies upon addition of Ag/Cu nanoparticles into the blend. The latter changes are perceived to be as a result of an increased conductivity and a higher charge density. The XRD results showed peaks which correspond to Ag in the face centred cubic. Ag peaks are more dominant than Cu peaks in the XRD of the mixed nanoparticles. The FTIR spectra of the Ag/Cu/CS/PVA composite fibers gave almost identical features as the blend. This proves that there was an interaction between CS and PVA polymer due to intermolecular hydrogen bonding. The TGA curves showed no significant effect on the thermal stability of the composite fibers upon addition of different nanoparticles loadings. The absorption spectra of the composite fibers showed an improved optical properties compared to the blend. For Ag and Cu nanoparticles composite fibers it was observed that addition of Ag nanoparticles in the blend resulted in an increase in fiber diameters with uniform morphology whereas for Cu resulted in a decrease in fiber diameters. Both Ag and Cu composite fibers showed an improved optical properties. The effect of CS/PVA, Ag/Cu, Ag, and Cu nanofibers on the selected microorganism (K.pneumoniae, S. aureus, P. aeruginosa, and E.coli) was evaluated using the disk diffusion method. It was observed that Ag/Cu/CS/PVA composite fibers showed greater activity against all microorganisms compared to Ag and Cu composite fibers. The alamar blue and Pierce Lactase dehydrogenase (LDH) assay were used to assess the effect of the blend and the composite fibers on cell viability and cytotoxicity, respectively. The results show that the prepared blend and the composite fibers did not have any toxic effect on human adipose derived stem cells (hADSC). The results also showed that as the concentration of Ag/Cu nanoparticles was increased the viability of the cells also increased after 24 hour incubation. More proliferation was observed in day 1 compared to day 3. The 30/70 blend showed more viable cell compared to the negative control. For Ag and Cu composite fibers the 30/70 CS/PVA blend increased cell proliferation after 3 days with 17% more viable cells compared to the negative control. These results show that the prepared blend with its composite fibers are biocompatible with human (ADSC) and may be suitable for use in biomedical application such as wound dressing.