No description available.

Neste trabalho, é apresentada uma variação da técnica de espectroscopia por cavidade ressonante tipo ring-down CRDS (do acrônimo em inglês Cavity Ring-Down Spectroscopy) para a obtenção simultânea do espectro de absorção de multicomponentes numa faixa espectral larga do visível. Esta nova técnica se resume no uso do espectro supercontinuum (resultante da irradiação de meios não lineares através de lasers de femtossegundo, ou simplesmente gerada por fontes compactas) como fonte de luz para iluminar a cavidade. Neste contexto são descritas as características dos módulos para a montagem de um MC-SC-CRDS (Multicomponent Supercontinuum Cavity Ring-Down Spectroscopy): os pares de espelhos altamente refletivos, a cavidade ressonante e o sistema de detecção. Alguns problemas relacionados à excitação de multimodos, à luz difusa, ao uso efetivo do intervalo dinâmico de detecção, à baixa resolução do instrumento em resolver linhas estreitas de absorção são situados. Apresentamos os espectros de absorção de H2O (políades 4nu, 4nu + delta ) e O2 (transições proibidas de spin b-X) simultaneamente medidos por essa técnica na faixa do visível, e uma comparação com as linhas de absorção baseadas do banco de dados HITRAN é feita para demonstrar a funcionalidade deste método. / In this work, we present a variation of the technique CRDS (Cavity Ring-Down Spectroscopy) to obtain simultaneously a multicomponent absorption spectrum in a broad visible range. This new approach uses the Supercontinuum (SC) spectrum (resulting from irradiation of nonlinear media by femtosecond lasers, or simply generated by compact sources) as a light source to illuminate the cavity. In this context it is described the features of the modules assembling a MC-SC-CRDS (Multicomponent Supercontinuum Cavity Ring-Down Spectroscopy): a set of high refletivity mirrors, the resonant cavity and the detection system. Some problems related to the multimode excitation, stray light, effective use of the dynamic range of the detector, the poor resolution of the instrument to resolve narrow absorption lines are issued. We present the absorption spectra of H2O (polyads 4nu, 4nu + delta ) and O2 (spin-forbidden b-X branch) measured simultaneously by this technique in the visible range and a comparison with the absorption lines based on HITRAN database is made to demonstrate the functionality of this method.

Neste trabalho, é apresentada uma variação da técnica de espectroscopia por cavidade ressonante tipo ring-down CRDS (do acrônimo em inglês Cavity Ring-Down Spectroscopy) para a obtenção simultânea do espectro de absorção de multicomponentes numa faixa espectral larga do visível. Esta nova técnica se resume no uso do espectro supercontinuum (resultante da irradiação de meios não lineares através de lasers de femtossegundo, ou simplesmente gerada por fontes compactas) como fonte de luz para iluminar a cavidade. Neste contexto são descritas as características dos módulos para a montagem de um MC-SC-CRDS (Multicomponent Supercontinuum Cavity Ring-Down Spectroscopy): os pares de espelhos altamente refletivos, a cavidade ressonante e o sistema de detecção. Alguns problemas relacionados à excitação de multimodos, à luz difusa, ao uso efetivo do intervalo dinâmico de detecção, à baixa resolução do instrumento em resolver linhas estreitas de absorção são situados. Apresentamos os espectros de absorção de H2O (políades 4nu, 4nu + delta ) e O2 (transições proibidas de spin b-X) simultaneamente medidos por essa técnica na faixa do visível, e uma comparação com as linhas de absorção baseadas do banco de dados HITRAN é feita para demonstrar a funcionalidade deste método. / In this work, we present a variation of the technique CRDS (Cavity Ring-Down Spectroscopy) to obtain simultaneously a multicomponent absorption spectrum in a broad visible range. This new approach uses the Supercontinuum (SC) spectrum (resulting from irradiation of nonlinear media by femtosecond lasers, or simply generated by compact sources) as a light source to illuminate the cavity. In this context it is described the features of the modules assembling a MC-SC-CRDS (Multicomponent Supercontinuum Cavity Ring-Down Spectroscopy): a set of high refletivity mirrors, the resonant cavity and the detection system. Some problems related to the multimode excitation, stray light, effective use of the dynamic range of the detector, the poor resolution of the instrument to resolve narrow absorption lines are issued. We present the absorption spectra of H2O (polyads 4nu, 4nu + delta ) and O2 (spin-forbidden b-X branch) measured simultaneously by this technique in the visible range and a comparison with the absorption lines based on HITRAN database is made to demonstrate the functionality of this method.

Compared with the detector devices made of inorganic semiconductors, organic photodetectors are granted with additional strengths, such as flexibility, high scalability and bio-compatibility. However, in the family of organic optoelectronic devices, the detectors that are capable of detecting photons at two or multiple specific wavelengths are still missing. Such photodetectors are highly interesting because they could identify the target objects or materials much more precisely by detecting the reflected, transmitted or emitted photons at two or multiple characteristic wavelengths. In this thesis project, the optical simulations using Transfer Matrix Method (TMM) were performed on the organic devices to achieve the dual wavelength narrowband detection in the near-infrared (NIR) spectral range of 700 ~ 1100 nm. The devices use the fact that, at the interface of the blended organic electron donating and accepting materials, the charge-transfer (CT) states with the transition energies that are lower than the optical gap of the neat materials are formed. Combined with a Fabry-Perot resonant cavity, the CT absorption can be dramatically enhanced at certain wavelengths. The simulation results show that the two detection wavelengths can be tuned independently from 650 to 1100 nm. The spectral resolution (full with at half maximum - FWHM) of the detection bands varies between 10 and 30 nm. The simulated external quantum efficiency (EQE) is ~35% at 700 nm and ~10% at 1000 nm, respectively. A possible application of such photodetectors is for example moisture detection, where two of the characteristic absorption peaks of water are located at around 750 and 960 nm. By optimizing the thickness of the two photo-absorbing layers in a tandem device structure, the detection bands can be tuned to match with those two wavelengths for simultaneous and precise detection.

A resonant cavity operating in TE011 mode was used to study the adsorption response of single walled carbon nanotubes (SWCNTs) and other nanomaterials for different types of gas molecules. The range of the frequency signal as a probe was chosen as geometry dependent range between 9.1 -9.8 GHz. A highly specific range can be studied for further experiments dependent on the type of molecule being investigated. It was found that for different pressures of gases and for different types of nanomaterials, there was a different response in the shifts of the probe signal for each cycle of gassing and degassing of the cavity. This dissertation suggests that microwave spectroscopy of a complex medium of gases and carbon nanotubes can be used as a highly sensitive technique to determine the complex dielectric response of different polar as well as non-polar gases when subjected to intense electromagnetic fields within the cavity. Also, as part of the experimental work, a range of other micro-porous materials was tested using the residual gas analysis (RGA) technique to determine their intrinsic absorption/adsorption characteristics when under an ultra-high vacuum environment. The scientific results obtained from this investigation, led to the development of a chemical biological sensor prototype. The method proposed is to develop operational sensors to detect toxin gases for homeland security applications and also develop sniffers to detect toxin drugs for law enforcement agency personnel.

Adaptive optics work to reduce optical losses in the LIGO detectors, making them more sensitive to gravitational wave events. Mode-mismatch between the coupled optical cavities, caused by uncertainty in the radii of curvature and orientation of the interferometer optics, is one of the main sources of loss in Advanced LIGO. Thermal actuators are used to dynamically change the radius of curvature of certain interferometer optics, allowing mode mismatches to be reduced. Finely tunable astigmatic mirrors have the potential to be very useful in gravitational wave detectors for beam reflections at non-normal incidence, but have never been tested. These astigmatic composite mirrors are constructed by bonding a fused silica mirror to a non-axially-symmetric metal plate. When heated, the mirror is differentially distorted in the x- and y-directions due to its asymmetric design, resulting in an elliptical reflected beam profile. We model and test an initial mirror design, finding that it does, in fact, act as an astigmatic mirror. This finding opens a new avenue towards development of adaptive optics for current and next-generation gravitational wave detectors.

In the study, conductive distributed Bragg reflectors (DBRs) fabricated at room temperature based on porous indium tin oxide (ITO) on dense ITO bilayers were proposed for resonant cavity organic light emitting diodes (RCOLEDs). In the fabrication of the ITO DBRs, the low refractive index porous ITO films were obtained by applying supercritical CO2 treatment at different temperature and pressures on the spin-coated sol-gel ITO films. On the other hand, the high refractive index ITO films were grown at room temperature by long-throw reactive ratio-frequency magnetron sputtering. The refractive index of the porous ITO film and ITO films were 1.54 and 2.0, respectively. For the DBR with 4 pairs ITO bilayers, the optical reflectance of more than 70 % was achieved. The stop band and the average resistivity is 140 nm and 2.2¡Ñ10-3 £[-cm, respectively. Finally, electrical and optical characteristics of the RCOLEDs fabricated on the ITO DBR were investigated and compared with those of the conventional OLEDs. The maximum luminous efficiency of 3.79 cd/A was obtained at 347 mA/cm2 for the RCOLED. This luminous efficiency was 26 % higher than that of the conventional OLED.

Maxwell's equations are a system of partial differential equations of vector fields. Imposing the constitutive relations for material properties yields equations for the curl and divergence of the electric and magnetic fields. The curl and divergence equations must be solved simultaneously, which is not the same as solving three separate scalar problems in each component of the vector field. This thesis describes a new method for solving partial differential equations of vector fields using the finite element method. New basis functions are used to solve the curl equation while allowing the divergence to be set as a constraint. The basis functions are defined on a mesh of bricks and the method is applicable for geometries that conform to a Cartesian coordinate system. The basis functions are a combination of cubic Hermite splines and second order Lagrange interpolation polynomials. The method yields a linearly independent set of constraints for the divergence, which is modelled to second order accuracy within each brick. Mesh refinement is accomplished by dividing selected bricks into $2\times 2\times 2$ smaller bricks of equal size. The change in the node pattern at an interface where mesh refinement occurs necessitates a modified implementation of the divergence constraints as well as additional constraints for hanging nodes. The mesh can be refined to an arbitrary number of levels. The basis functions can exactly model the discontinuity in the normal component of the field at a planar interface. The method is modified to solve problems with singularities at material boundaries that form $90^{\circ}$ edges and corners. The primary test problem of the new basis functions is to obtain the resonant frequencies and fields of three-dimensional cavities. The new basis functions can resolve physical solutions and non-physical, spurious modes. The eigenvalues obtained with the new method are in good agreement with exact solutions and experimental values in cases where they exist. There is also good agreement with results from second-order edge elements that are obtained with the software package HFSS. Finally, the method is modified to solve problems in cylindrical coordinates provided the domain does not contain the coordinate axis.

Maxwell's equations are a system of partial differential equations of vector fields. Imposing the constitutive relations for material properties yields equations for the curl and divergence of the electric and magnetic fields. The curl and divergence equations must be solved simultaneously, which is not the same as solving three separate scalar problems in each component of the vector field. This thesis describes a new method for solving partial differential equations of vector fields using the finite element method. New basis functions are used to solve the curl equation while allowing the divergence to be set as a constraint. The basis functions are defined on a mesh of bricks and the method is applicable for geometries that conform to a Cartesian coordinate system. The basis functions are a combination of cubic Hermite splines and second order Lagrange interpolation polynomials. The method yields a linearly independent set of constraints for the divergence, which is modelled to second order accuracy within each brick. Mesh refinement is accomplished by dividing selected bricks into $2\times 2\times 2$ smaller bricks of equal size. The change in the node pattern at an interface where mesh refinement occurs necessitates a modified implementation of the divergence constraints as well as additional constraints for hanging nodes. The mesh can be refined to an arbitrary number of levels. The basis functions can exactly model the discontinuity in the normal component of the field at a planar interface. The method is modified to solve problems with singularities at material boundaries that form $90^{\circ}$ edges and corners. The primary test problem of the new basis functions is to obtain the resonant frequencies and fields of three-dimensional cavities. The new basis functions can resolve physical solutions and non-physical, spurious modes. The eigenvalues obtained with the new method are in good agreement with exact solutions and experimental values in cases where they exist. There is also good agreement with results from second-order edge elements that are obtained with the software package HFSS. Finally, the method is modified to solve problems in cylindrical coordinates provided the domain does not contain the coordinate axis.

<p>Resonant-cavity-enhanced (RCE) photodetectors have recently attracted attention due to their wavelength selectivity and high efficiency in comparison to conventional photodetectors. The goal of this ongoing research initiative is to develop a Si-based RCE infrared photodetector using inductively coupled plasma chemical vapor deposition (ICP-CVD) as the primary fabrication method. At the current stage of the project, wavelength-selective optical structures have been successfully fabricated using Si/SiO₂ layer pairs. These structures demonstrate sharp transmission peaks at their intended wavelength, making them potentially useful for efficient photodetection. The next phase of the photodetector development process involves using ion implantation to introduce dopants and create the bias.The project also explores the temperature sensing capability of the resonant-cavity structures. The temperature sensitivity tests indicate that the specific type of structure fabricated in this project may be relevant for fiber-optic temperature sensing applications. Additional testing is required to evaluate the performance characteristics of such structures as Fabry-Perot sensors capable of wavelength-encoded temperature measurement.</p> / Master of Applied Science (MASc)