DS-CDMA is a popular multiple access technique used in many mobile networks to efficiently share channel resources between users in a cell. Synchronization between users maximizes the user capacity of these systems. However, it is difficult to perfectly synchronize users in the reverse link due to the geographic diversity of mobile users in the cell. As a result, most commercial DS-CDMA networks utilize an asynchronous reverse link resulting in a reduced user capacity. A possible compromise to increase the user capacity in the reverse link is to implement a quasi-synchronous timing scheme, a timing scheme in which users are allowed to be slightly out of synchronization. This paper suggests a possible way to implement a quasi-synchronous DS-CDMA reverse link using the method of “data chunking”. The basic premise is derived by making a link between TDMA and synchronous DS-CDMA. By considering some basic TDMA limitations, a proposed “data chunked” quasi-synchronous DS-CDMA system is derived from a TDMA system. The effects of such a system are compared to those of a chip interleaved system. MATLAB simulations are performed to analyze the performance of the system in the presence of small synchronization errors between users. Implementation of guard bands is explored to further reduce errors due to imperfect synchronization between users.

[pt] Este trabalho tem como finalidade estudar o problema da detecção de usuários no canal reverso de sistemas MIMO de larga escala, que são caracterizados pelo elevado número de elementos de transmissão e recepção, com foco na complexidade computacional e no desempenho em termos de taxa de erro destes sistemas. Inicialmente, os algoritmos de detecção da família Likelihood Ascent Search (LAS) são investigados e é desenvolvido um novo algoritmo de detecção, denominado de Random-List Based LAS (RLBLAS), capaz de atingir melhores taxas de erros com menor complexidade computacional do que os demais detectores considerados. Posteriormente, técnicas de detecção e decodificação iterativas (Iterative Detection and Decoding - IDD) em sistemas MIMO foram analisadas de forma a propor uma estratégia IDD de complexidade computacional reduzida a fim de viabilizar a sua aplicação em cenários massivos. Finalmente, o problema da contaminação por pilotos em sistemas MIMO multicelulares de larga escala, um dos principais limitadores do desempenho desse tipo de sistema, é estudado e estratégias de detecção com cooperação parcial entre as estações base componentes do sistema que visam mitigar os efeitos da contaminação por pilotos são propostas. As análises e afirmações realizadas durante a presente tese são sustentadas por resultados de simulações de Monte Carlo dos sistemas de comunicações em diversos cenários distintos, incluindo os casos em que são considerados os efeitos de correlação entre as antenas de transmissão/recepção, os efeitos de sombreamento e os erros de estimação dos estados dos canais de comunicações envolvidos. / [en] This work focuses on the multi-user multi-cellular large-scale MIMO reverse channel detection problem, where the number of transmitting and receiving antenna elements grows to the order of hundreds. In these scenarios, one major issue is the computational complexity of such systems. Therefore, this thesis aims to propose low-complexity techniques with good BER performance for the reverse channel detection of MIMO systems. Initially, the detection algorithms of the Likelihood Ascent Search (LAS) family are investigated and a new LAS based detector is proposed. This new detector, named Random-List Based LAS (RLB-LAS), is capable of achieving better BER with lower complexity then the other considered detectors. Next, iterative detection and decoding (IDD) techniques are analyzed in order to propose an IDD strategy applied to the detection and decoding of the reverse MIMO channel with reduced complexity to make possible its application to massive scenarios. Finally, the pilot contamination problem in multi-cellular large-scale MIMO systems, one of the major bounds on BER performance of these systems, are studied and some cooperative strategies are proposed in order to reduce the effects of this type of impairments. The analysis and statements of this thesis are supported by Monte Carlo simulation results of the considered systems in different scenarios, including the cases where the effects of transmitting and receiving antenna correlation, log-normal shadowing, and the estimation errors on the channel state information acquisition are considered.

In wireless communication systems, the use of multiple antennas, also known as Multiple-Input Multiple-Output(MIMO) communications, is now a widely accepted and important technology for improving their reliability and throughput performance. However, in order to achieve the performance gains predicted by the theory, the transmitter and receiver need to have accurate and up-to-date Channel State Information(CSI) to overcome the vagaries of the fading environment. Traditionally, the CSI is obtained at the receiver by sending a known training sequence in the forward-link direction. This CSI has to be conveyed to the transmitter via a low-rate, low latency and noisy feedback channel in the reverse-link direction. This thesis addresses three key challenges in sending the CSI to the transmitter of a MIMO communication system over the reverse-link channel, and provides novel solutions to them. The first issue is that the available CSI at the receiver has to be quantized to a finite number of bits, sent over a noisy feedback channel, reconstructed at the transmitter, and used by the transmitter for precoding its data symbols. In particular, the CSI quantization technique has to be resilient to errors introduced by the noisy reverse-link channel, and it is of interest to design computationally simple, linear filters to mitigate these errors. The second issue addressed is the design of low latency and low decoding complexity error correction codes to provide protection against fading conditions and noise in the reverse-link channel. The third issue is to improve the resilience of the reverse-link channel to fading. The solution to the first problem is obtained by proposing two classes of receive filtering techniques, where the output of the source decoder is passed through a filter designed to reduce the overall distortion including the effect of the channel noise. This work combines the high resolution quantization theory and the optimal Minimum Mean Square Error(MMSE) filtering formulation to analyze, and optimize, the total end-to-end distortion. As a result, analytical expressions for the linear receive filters are obtained that minimize the total end-to-end distortion, given the quantization scheme and source(channel state) distribution. The solution to the second problem is obtained by proposing a new family of error correction codes, termed trellis coded block codes, where a trellis code and block code are concatenated in order to provide good coding gain as well as low latency and low complexity decoding. This code construction is made possible due to the existence of a uniform partitioning of linear block codes. The solution to the third problem is obtained by proposing three novel transmit precoding methods that are applicable to time-division-duplex systems, where the channel reciprocity can be exploited in designing the precoding scheme. The proposed precoding methods convert the Rayleigh fading MIMO channel into parallel Additive White Gaussian Noise(AWGN) channels with fixed gain, while satisfying an average transmit power constraint. Moreover, the receiver does not need to have knowledge of the CSI in order to decode the received data. These precoding methods are also extended to Rayleigh fading multi-user MIMO channels. Finally, all the above methods are applied to the problem of designing a low-rate, low-latency code for the noisy and fading reverse-link channel that is used for sending the CSI. Simulation results are provided to demonstrate the improvement in the forward-link data rate due to the proposed methods. Note that, although the three solutions are presented in the context of CSI feedback in MIMO communications, their development is fairly general in nature, and, consequently, the solutions are potentially applicable in other communication systems also.