The benefits of fibre reinforced concrete (FRC) have been thoroughly investigated. Much of this work has focussed on steel FRC subjected to monotonic loads. Data on the structural behaviour of macro-synthetic FRC or FRC under cyclic loads is scarce. A pilot investigation on the shear behaviour of macro-synthetic FRC and on the behaviour of FRC under reversed cyclic in-plane shear loading was carried out. Five in-plane shear panel tests were performed. The parameters under study were the fibre material type (steel or macrosynthetic) and loading protocol. Additionally, a number of compression, direct tension, and flexural tests were performed to determine the material properties of the concretes for comparison. The material response of 2.0% by volume of macro-synthetic FRC matched closely with 1.0% steel FRC. Finally, building upon an existing steel FRC model, a model for macro-synthetic FRC in tension was proposed and a short verification study was undertaken.

The benefits of fibre reinforced concrete (FRC) have been thoroughly investigated. Much of this work has focussed on steel FRC subjected to monotonic loads. Data on the structural behaviour of macro-synthetic FRC or FRC under cyclic loads is scarce. A pilot investigation on the shear behaviour of macro-synthetic FRC and on the behaviour of FRC under reversed cyclic in-plane shear loading was carried out. Five in-plane shear panel tests were performed. The parameters under study were the fibre material type (steel or macrosynthetic) and loading protocol. Additionally, a number of compression, direct tension, and flexural tests were performed to determine the material properties of the concretes for comparison. The material response of 2.0% by volume of macro-synthetic FRC matched closely with 1.0% steel FRC. Finally, building upon an existing steel FRC model, a model for macro-synthetic FRC in tension was proposed and a short verification study was undertaken.

Prior experimental research clearly reveals that the performance of reinforced concrete frame structures under earthquake loading is closely related to the behavior of beam-to-column connection regions. In order for a reinforced concrete building to have an adequate response under high lateral deformations, beam-to-column connections should be able to preserve their integrity. However, even today beam-to-column connections are assumed to be rigid or elastic, leading to an incorrect estimation of the structural response under earthquake loading. One of the basic reasons for the assumption of rigid joints is the lack of analytical models that adequately represent the seismic behavior of the connection region. In this thesis, an analytical model that realistically represents the beam-to-column connection response is developed, in the light of prior experimental data. The experimental subassemblies used in the generation of the analytical model are later modeled in OpenSees environment in order to verify the accuracy of the model. Throughout the research, utmost attention is paid for the model to be simple enough to be used practically and also to cover a wide range of beam to column connection properties.

The importance of seismic rehabilitation became evident with 1992 Erzincan Earthquake, after which a large number of reinforced concrete buildings damaged in recent earthquakes required strengthening as well as repair. In the studies related to rehabilitation, it has been realized that inadequate lateral stiffness is one of the major causes of damage in reinforced concrete buildings. Recently, economical, structurally effective and practically applicable seismic retrofitting techniques are being developed in METU Structural Mechanics Laboratory to overcome these kinds of problems. The strengthening technique proposed in this thesis is on the basis of the principle of strengthening the existing hollow brick infill walls by using high strength precast concrete panels such that they act as cast-in-place concrete infills improving the lateral stiffness. Also, the technique would not require evacuation of the building and would be applicable without causing too much disturbance to the occupant. For this purpose, after two preliminary tests to verify the proper functioning of the newly developed test set-up, a total of fourteen one-bay two story reinforced concrete frames with hollow brick infill wall, two being unstrengthened reference frames, were tested under reversed cyclic lateral loading simulating earthquake loading. The specimens were strengthened by using six different types of precast concrete panels. Strength, stiffness, energy dissipation and story drift characteristics of the specimens were examined by evaluating the test results. Test results indicated that the proposed seismic strengthening technique can be very effective in improving the seismic performance of the reinforced concrete framed building structures commonly used in Turkey. In the analytical part of the study, hollow brick infill walls strengthened by using high strength precast concrete panels were modelled once by means of equivalent diagonal struts and once as monolithic walls having an equivalent thickness. The experimental results were compared with the analytical results of the two approaches mentioned. On the basis of the analytical work, practical recommendations were made for the design of such strengthening intervention to be executed in actual practice.