The master‘s thesis deals with utilization of infrared camera for temperature measurement of electrical machines. The first part describes non-contact temperature measuring, the second part describes principle of sensors that evaluate quantity of incident infrared radiation. In the next part there is termovision camera SAT-HY 6800 presented and the instructional manual for SAT Report computer programme created. This computer programme is used for analyzing of termovision pictures from the SAT-HY 6800 termovison camera. The chapter 7 describes temperature measuring of one-phase asynchronous motor type J22TO484. The chapter 8 describes temperature measuring of semiconductor components of EC motor G6 series. Both of these motors are produced by ATAS elektromotory Náchod a.s. The last part of the thesis describes creation of animation of one-phase asynchronous motor type J22TO455. The animation was created in 3ds Max computer programme.

In the opening part of this thesis, the reader is briefly introduced into safety technique devices. There are basic types of security sensors discussed together with the most common methods of their connection with the security central. Further text focuses on elaborating the main topic of this thesis - the design of home security central equipped with a WiFi interface.

In my master's tehsis I'm dealin with the methods used for non-invasive blood pressure measurement. For realization of a virtual blood pressure meter in LabVEW I have chosen the oscillometric method. Algorithm determining systolic and diastolic blood pressure is based on the relatively easy detection of maximum amplitude oscillations (corresponds with a mean arterial pressure), when thelimiting valuesof blood pressure are in a specific ratio with a maximum amplitude of oscillation. In LabVIEW was solved loading of signal from the measure card and processing pressure curve into a form suitable for the detection of the peak oscillations. The program calculates the limits of arterial pressure and mean heart rate too. Linking the virtual device with the blood pressure sensor Vernier BPS-BTA then makes up komplex for capturing the blood pressure via oscillatory method.

Master’s thesis deals with a design and a realization of multifunction board computer for motorcycles. The goal of the device is measuring speed, rotation speed of engine, temperature of ambient, temperature of engine, temperature in intake including signalization of overvoltage and hightemperature. The device is completed by above standard function such as measuring titl of motorcycle, climbing of route, route recording and data transmission to the computer. The thesis includes a complete solution of hardware and software part of the device.

Thesis deal with proposal construction Chalder for centreless grinding machine Jupiter 125. Chalder is designed for workpiece with maximum average 12 mm, maximum longitude 120 mm and mass 0,1 kg. In the thesis are described components that were used at solving and intended time exchanges workpiece, the economics estimation and processed needed design documentation.

Hlavním přínosem této práce jsou dva nové přístupy pro zvýšení bezpečnosti biometrických systémů založených na rozpoznávání podle otisků prstů. První přístup je z oblasti testování živosti a znemožňuje použití různých typů falešných otisků prstů a jiných metod oklamání senzoru v průběhu procesu snímání otisků. Tento patentovaný přístup je založen na změně barvy a šířky papilárních linií vlivem přitlačení prstu na skleněný podklad. Výsledná jednotka pro testování živosti může být integrována do optických senzorů.  Druhý přístup je z oblasti standardizace a zvyšuje bezpečnost a interoperabilitu procesů extrakce markantů a porovnání. Pro tyto účely jsem vytvořila metodologii, která stanovuje míry sémantické shody pro extraktory markantů otisků prstů. Markanty nalezené testovanými extraktory jsou porovnávány oproti Ground-Truth markantům získaným pomocí shlukování dat poskytnutých daktyloskopickými experty. Tato navrhovaná metodologie je zahrnuta v navrhovaném dodatku k normě ISO/IEC 29109-2 (Amd. 2 WD4).

This diploma thesis is focused on the analysis of results accuracy of astronomical positioning. It describes observation methods and the latest surveying systems used in geodetic astronomy. Further in the thesis there is the description of surveying system MAAS-1. Subject of the elaboration is the data obtained by measuring with this system. Testing is focused on digital camera. There is also an analysis of the results of geographical coordinates, depending on the accuracy of determining the angled pixel size and also on the accuracy of the input coordinates.

The aim of this diploma thesis is to describe localization and calculation load identification of dynamic systems using piezoelectric sensors. Finding methods, which would allow us to evaluate loads on simple systems is the key to their application in the structural health monitoring of more complex systems. A theory necessary for understanding and application in aerospace, civil engineering, automobile industry, and train traffic of presented methods is given in the first part of the thesis. In these applications, the methods of wave propagation and different types of neural network methods are used to evaluate load identification. It is possible to evaluate loads by using a time reverse method, a method based on signal deconvolution, and a method based on a voltage amplitude ratio of the piezoelectric sensor. In the next part, the methods are described, the suitable place for gluing of a sensor, and the number of sensors for using method is given. These methods were verified and compared to a simple experimental system. In the following part, the model of the piezoelectric sensor is presented. It is possible to use the model for calculating voltage output from the strain. For methods verification, the problem of train passage in a specific place of the railway is chosen. The speed of the train and its load on the railway was calculated by using these methods.

This thesis deals with design and implementation of a versatile control unit, which is primarily designed for control of solar collectors. It describes the various stages of design. First, the system of solar collectors is introduced. Its input-output parts are analyzed and the requirements are determined for the control unit. The characteristics of temperature sensors are examined, the work deals with continuous variable speed circulators. The following part is dedicated to hardware and software implementation of the objectives of the work. The boards were designed in Eagle design environment, the firmware was written in C programming language. In conclusion, the evaluation of the results of the proposed system and possible ways of its further development are discussed. The versatile control unit can be deployed in practice realistically.