No description available.

Objectives: To investigate the relationship between maternal separation anxiety, hours in non-maternal child care and security of motherinfant attachment in early infancy. Design: Prospective. Methods: The participants for this study were 67 mothers and their infants enrolled in a large scale prospective study. The first 100 women were sent a letter outlining the current study and requested to 'opt in'. Those mothers who agreed to participate completed the Maternal Separation Anxiety Scale (MSAS) when the infant was ten and seventeen months. The mother-infant attachment relationship was assessed according to the standardised Strange Situation Procedure when the infant was aged seventeen months (+/- two weeks). All other data were collected in the main study. Results: Maternal Separation Anxiety was not predictive (alone or in combination with other variables) of attachment status. Significant differences in levels of separation anxiety were found between mothers who were and mothers who were not employed outside the home. Separation anxiety was also related to a number of variables, including the age of the infant when the mother planned to use non-maternal child care, the total hours of non-maternal child care, infant temperament and maternal sensitivity. Conclusions: The non-significant results in the main analysis mean that no firm conclusions regarding a relationship between levels of maternal separation anxiety, hours in non-maternal child care and security of mother-infant attachment in infancy can be drawn. Future research (with a larger and more diverse sample) should continue to explore the concept of maternal separation anxiety in relation to a number of other variables, including maternal role preference and quality of child care, as it may hold important implications for social policy and preventative clinical work.

The objectives of this thesis were: (1) to quantify seasonal groundwater contribution to total stream discharge and (2) further our understanding of sub-arctic carbon sources and pathways within a sub-arctic discontinuous permafrost river catchment. Twenty-two samples were taken from the North Klondike River, 14 samples from 5 of its tributaries, and 46 rain and snowmelt samples from the Dawson City Airport, Yukon, Canada,. During the winter months, groundwater is responsible for greater than 95% of total river discharge. Spring freshet and summer flow bring snowmelt and precipitation, contributing anywhere from 30% to greater than 60% of total river discharge. Groundwater is characterised by high concentrations of geogenic solutes from weathering during recharge, dissolved inorganic carbon, and carbon-14 activities of 0.61 pMC. Tritium activities indicate a fast moving system, with groundwater ages measuring less than 10 years. The most significant discharge of organic carbon from the system is during spring freshet (434,192 kg carbon). Primary productivity within the system is estimated to be 10.2 grams of carbon per metre squared, with approximately 96% of carbon being sequestered or emitted as carbon dioxide.

No description available.

Thesis (Ph. D.)--University of Texas at Austin, 2005. / Vita. Includes bibliographical references.

The never-ending quest to design and produce bespoke materials optimized for specific purposes has recently led to the discovery of a rapidly expanding subclass of porous materials known as Metal-Organic Frameworks (MOFs). The potential of MOFs appears to be immense due to the accessibility of a nearly-infinite number of both organic and inorganic components – building blocks that can be easily self-assembled in extended networks. Taking advantage of modular composition, high surface areas, adjustable pore sizes, and tunable surface properties, MOFs are emerging as one of the most promising materials for energy and environmental applications. \nThe main objective of this thesis is to explore different aspects concerning MOF materials, building on the knowledge from several subtypes of MOFs developed primarily in Prof. Eddaoudi’s group. In particular, this dissertation expands the diversity within and utility of the following MOF subtypes: MOFs comprised of sql supermolecular building layers (SBL), MOFs based on fluorometalates, and zeolite-like MOFs (ZMOFs). \nWhenever feasible, emphasis was placed on the synthesis and application of MOFs as supported thin films, particularly as the sensitive element of capacitive gas sensors or as a selective layer of composite membranes for gas separation. \nSome of the highlights from the results obtained in the course of this study include: \n \n- Introduction of MOFs to the field of reverse selective (CO2/H2) membranes for hydrogen purification. Notably, despite the challenges associated with the preparation of continuous “defect-free” MOF membranes, three different types of adsorption-driven MOF membranes have been synthesized and have shown a preferential permeation of CO2 over H2. In addition, the diffusion driven butane isomers separation was realized in ana-ZMOF membrane, being close to or even overperforming benchmark materials reported in the literature for the separation of both gas pairs. \n- Identification of an appropriate MOF compatible with the developed capacitive-based sensor system and capable of the detection of sulfur dioxide in ppb level. \n- Discovery of a ZMOF material with a new unprecedented zeolitic topology and its ability to separate propylene from propane upon the difference in diffusion of the adsorbates.

Thesis (MEng)--Stellenbosch University, 2015. / ENGLISH ABSTRACT: The operation and optimisation of a distillation train directly effects the total energy consumption of a typical processing plant. With this in mind, the efficient separation of low molecular weight alcohol azeotropes, using heterogeneous azeotropic distillation, is of great economic and environmental importance. Heterogeneous azeotropic distillation involves the addition of an extraneous component, known as an entrainer, to the mixture to facilitate separation. Benzene has long been replaced as the entrainer of choice, due to its carcinogenic nature, and research into finding a more suitable entrainer has commenced. To determine if an entrainer is suitable for a particular separation, detailed phase behaviour information of the ternary alcohol/entrainer/water system is required; vapour-liquid (VLE), vapour-liquid-liquid (VLLE) equilibria data and the composition of all azeotropes present. This is complicated by the fact that thermodynamic models (like the nonrandom two-liquid (NRTL), universal functional (UNIFAC) and universal quasichemical (UNIQUAC) activity coefficient models) often fail to predict the phase equilibria of ternary systems. The lack of available experimental phase equilibria data, and the inability of thermodynamic models to predict phase equilibria data, has fueled the need for the experimental determination of accurate, repeatable isobaric VLE, VLLE and azeotropic data. With this in mind, this research is focused on the experimental determination of VLE, VLLE and azeotropic data for three low molecular weight alcohol/entrainer/water systems at 101.3 kPa. Following an extensive literature study on azeotropes, applicable separation techniques and available VLE and VLLE data in literature, the ethanol/2-butanone/water, n-propanol/2-butanone/water and iso-propanol/2-butanone/water systems were chosen for experimental investigation. The experimental determination was carried out in a Gillespie type still, equipped with an ultrasonic homogenizer. The temperature and pressure accuracies of the equipment were found to be 0.03°C and 2mbar respectively. The chosen experimental methodology was verified, and its repeatability tested, through the measurement of isobaric VLE and VLLE data of ethanol/isooctane, ethanol/n-butanol/water and n-propanol/isooctane/water systems at 101.3 kPa and subsequent comparison of the measured data with literature data. The compositional error reported, taking into account experimental and analysis effects, is ±0.014 mole fraction. All experimentally determined data sets, verification and new data, were tested for thermodynamic consistency by using the Wisniak modification of the Herrington test, the L/W consistency test, as well as the McDermott-Ellis consistency test, and found to be consistent. The Othmer-Tobias correlation was used to ensure the measured LLE data followed a steady trend, with all R-values larger than 0.910. For all three of the new systems chosen, the absence of ternary heterogeneous azeotropes was noted. The presence of a ternary homogeneous azeotrope was found for both the ethanol/2-butanone/water and iso-propanol/2-butanone/water systems. No ternary azeotropes are present for the n-propanol/2-butanone/water system. Suitable entrainers were compared to 2-butanone (MEK) by plotting measured data and literature information of five similar alcohol/entrainer/water systems on a ternary phase diagram. It was found that MEK could not be considered as a suitable entrainer for heterogeneous azeotropic distillation of ethanol, n-propanol and IPA. This is due to the absence of a ternary heterogeneous azeotrope for the aforementioned alcohol/MEK/water systems. Finally, the ability of thermodynamic models (NRTL, UNIFAC and UNIQUAC) to predict experimental data was determined both visually and through descriptive statistics. This entailed the inspection of ternary phase diagrams and the calculation and evaluation of average absolute deviation (AAD) and and average absolute relative deviation (AARD%) values. The measured data were modelled in Aspen Plus®. It was found that none of the models could predict the ternary systems with acceptable accuracy and the data were regressed. In general, the regressed parameters for the NRTL, UNIFAC and UNIQAC models improved the model predictions when compared to the built-in Aspen parameters. The UNIFAC model predicted the ethanol/MEK/water and n-propanol/MEK/water systems most accurately while none of the models could predict the IPA/MEK/water systems with acceptable accuracy. / AFRIKAANSE OPSOMMING: Die ontwerp en optimering van 'n distillasietrein het ‘n duidelike effek op die totale energieverbruik van ‘n tipiese prosesaanleg. Met dit in gedagte, is ‘n meer doeltreffende skeiding van lae molekulêre massa alkohol aseotrope, met behulp van heterogene aseotropiese distillasie, voordelig vir die ekonomie en die omgewing. Heterogene aseotropiese distillasie behels die toevoeging van 'n eksterne komponent, wat bekend staan as 'n skeidingsagent, om uiteindelik die skeiding te fasiliteer deur die komponente se dampdrukke te verander. Benseen was in die verlede ‘n gewilde skeidingsagent, maar dit is a.g.v. sy karsenogeniese eienskappe nie meer aanvaarbaar om te gebruik nie. Nuwe navorsing in hierdie veld fokus dus onder andere op die identifisering van meer geskikte skeidingsagente. Om te bepaal of 'n skeidingsagent geskik is, word indiepte fasegedrag inligting benodig, i.e. damp-vloeistof en damp-vloeistof-vloeistof ewewigsdata en die samestelling van alle aseotrope teenwoordig. Ongelukkig kan termodinamiese modelle dikwels nie die fasegedrag van ternêre stelsels voorspel nie. Dit, sowel as die beperkte beskikbaarheid van eksperimentele ewewigsdata in die literatuur, het dus hierdie navorsing aangevuur. Die projek het gefokus op die experimentele bepaling van damp-vloeistof en damp-vloeistof-vloeistof ewewigsdata en aseotropiese data vir drie alkohol/skeidingsagent/water-stelsels by 101.3 kPa. Na ‘n indiepte literatuurstudie van aseotrope, gepaste skeidingstegnieke en beskikbare damp-vloeistof en damp-vloeistof-vloeistof ewewigsdata, is 2-butanone (MEK) gekies as ‘n moontlike skeidingsagent en die etanol/MEK/water-, n-propanol/MEK/water- en iso-propanol/MEK/water-stelsels gekies vir eksperimentele ondersoek. Die data is met ‘n dinamiese Gillespie eenheid gemeet, toegerus met ‘n ultrasoniese homogeniseerder om vloeistof-vloeistof skeiding te voorkom. Die akkuraatheidsbande van temperatuur- en druk meetinstrumente was 0,03°C en 2 mbar, onderskeidelik. Die eksperimentele metode en die herhaalbaarheid van metings is bevesting, deur die isobariese damp-vloeistof en damp-vloeistof-vloeistof ewewigsdata van etanol/iso-oktaan, etanol/n-butanol/water en n-propanol/iso-oktaan/water te vergelyk met onafhanklike stelle ooreenstemmende data uit die literatuur. Die gesamentlike eksperimentele en analitiese fout wat gemaak kon word tydens bepaling van molfraksie samestellings was ±0.014 molfraksie. Alle gemete eksperimentele data is getoets vir termodinamiese samehang deur middel van beide die L/W en McDermott-Ellis konsekwentheidstoetse. Die Othmer-Tobias korrelasie is gebruik om seker te maak dat die gemete LLE data ‘n konstante tendens volg, met alle R-waardes groter as 0.910. Vir al drie van die nuwe stelsels wat gekies is, was ‘n drieledige heterogene aseotroop afwesig. Die teenwoordigheid van drieledige homogene aseotrope is egter waargeneem vir die etanol/MEK/water- en IPA/MEK/water-stelsels. Geen drieledige aseotrope is vir die n-propanol/MEK/water-sisteem gevind nie. Alle gemete data, asook literatuur inligting van vyf soortgelyke alkohol/skeidingsagent/water sisteme, is op ‘n drieledige fase diagram voorgestel om die skeidingsagente met mekaar te vergelyk. Hiervolgens word dit getoon dat MEK nie as ‘n gepaste skeidingsagent vir heterogene aseotropiese distillase beskou kan word nie a.g.v. die afwesigheid van ‘n drieledige heterogene aseotroop in die voorgenoemde alkohol/MEK/waterstelsels. Die vermoë van die termodinamiese modelle (NRTL, UNIFAC en UNIQUAC) om die eksperimentele data te voorspel is visueel (per grafiek) sowel as deur beskrywende statistiek bepaal. Dit behels die inspeksie van drieledige fasediagrame en die berekening en evaluasie van die gemiddelde absolute afwyking en gemiddelde absolute relatiewe afwykingswaardes. Hierdie teoretiese data is met Aspen Plus® bepaal. Nie een van die modelle kon die drieledige stelsels se fasegedrag met aanvaarbare akkuraatheid voorspel nie. Die parameters vir die NRTL-,UNIFAC- en UNIQUAC-modelle kan verbeter word deur middel van regressie, in vergelyking met die ingeboude Aspen parameters. Dit is bevind dat die UNIFAC model die etanol/MEK/water- en n-propanol/MEK/water-stelsel die beste kan voorspel. Nie een van die bogenoemde modelle kon egter die fasegedrag van die IPA/MEK/water-stelsel voorspel nie.

Thesis (M.S.)--Boston University / PLEASE NOTE: Boston University Libraries did not receive an Authorization To Manage form for this thesis or dissertation. It is therefore not openly accessible, though it may be available by request. If you are the author or principal advisor of this work and would like to request open access for it, please contact us at open-help@bu.edu. Thank you. / 2031-01-01

This thesis reviews the housing-related implications of separation and divorce for women. It arges that the housing circumstances must be placed within a broader perspective of the social and economic consequences and ideological environment surrounding divorce. In the same way, operation of the housing system must be placed within a wider context, particularly in relation to the degree of change in its operational environment within the last 20 years. The thesis finds that the circumstances surrounding leaving a marriage are personally traumatic, and lead to a period of economic, housing and personal crisis. Over time, although the tendency is for establishment of re-equlibrium, considerable disadvantages prevail for women. The quickest method of establishing re-equilibrium for women is to repartner.

Alkaline fuel cells (AFC's) using renewable fuels are a developing technology capable of meeting market niches in standby, standalone and distributed power generation. AFC's generate electricity, heat and water using hydrogen and oxygen as fuels. While AFC's have been known and the principles demonstrated for over sixty years, their use has been restricted primarily to space applications. Recent technological developments have seen the cost of AFC stacks fall considerably; this together with several other advantages over competing fuel cell technology, has rekindled interest in commercial systems. The main deterrent to wide spread commercialisation of AFC systems is susceptibility to carbon dioxide (CO2) in atmospheric air used as the oxygen supply. AFC's require a low cost, low energy, continuous scrubbing device to reduce CO2 in air from approximately 380 parts per million (ppm) atmospheric concentration to below 50 ppm. Current technology to overcome this problem, a solid expendable absorbent called soda lime, is not viable for commercial systems. The project scope included concept generation of a device to remove CO2 from air, the development of a CO2 measurement technique, investigation of chemistry and flow phenomena to determine design relations, and product design and embodiment. The scrubber system conceived specifically for AFC systems uses the temperature swing chemistry of a liquid chemical absorbent, monoethanolamine, and a packed bubble column apparatus to provide intimate gas-liquid interaction. Prototype development proved the Carbon Dioxide Continuous Scrubber (CDOCS) concept and a Patent Cooperation Treaty (PCT) patent was granted, followed by a full American patent. A gas chromatographic measurement technique was developed to measure low ppm concentration CO2 in air, enabling regular monitoring of scrubbed gas. Carbon dioxide was separated from a small sample of scrubbed air by chromatographic columns, and the gases analysed with a thermal conductivity detector. The GC system was capable of measuring to 10 ppm with good resolution and accuracy. Experimental studies were carried out to characterise the flow dynamics and absorption phenomena in the packed bubble column absorber. The relationship between absorption performance and gas-liquid contact time, an important operating parameter for use with AFC's, was theoretically determined and later confirmed by experiment. The regeneration process was studied and the optimal regenerator design determined to be second, smaller packed bubble column. Experiments were conducted to establish design relations for regeneration temperature, flush gas flow rate and the effect of multiple regeneration cycles. A prototype CDOCS system was built to enable experimental characterisation of scrubbing performance as a function of primary design and operating parameters including liquid depth, regenerator operating temperature and solution composition. This resulted in a good understanding of the system, and an optimised experimental run was performed for cost and performance comparison to existing scrubbing technology. The CDOCS was capable of reducing CO2 in air from 380 to 80 ppm for thirty days, providing low cost, low maintenance scrubbing compared to soda lime. The capital cost of the CDOCS is considerably more than for soda lime scrubbers, and the penalty for extended operation is parasitic power consumption by the CDOCS system totalling less than 7% of fuel cell output. It is suggested that a combination of the two technologies be used initially to provide effective, low cost scrubbing for AFC and CDOCS co-development. Future work on the CDOCS project should include reduction of chemical vapour carry over to the fuel cell, followed by integration with an AFC system. This would allow further development, refinement and design for production to reduce capital cost.