<p> This thesis describes the construction and testing of small-scale shear wall buildings with rigidly connected floor slabs, but without wall openings. A micro-concrete material was used in the casting of both the basic small-scale shear wall buildings and the floor slabs. The vertically cantilevered buildings were tested by applying a transverse static load at the top of the buildings.</p> <p> The behaviour of buildings with only floor slabs was compared with that of buildings containing only wall openings. The results of static loading of the buildings were compared with those results predicted analytically using Vlasov's thin-walled elastic beam theory.</p> / Thesis / Master of Engineering (MEngr)

Damage observed after previous earthquakes indicates that a large number of existing buildings are vulnerable to seismic hazard. This research intends to assess seismic vulnerability of regular and irregular shear wall buildings in Canada, having different heights and different levels of seismic design and detailing. As seismic hazard is a probabilistic event, a probabilistic methodology has been adopted to assess the seismic vulnerability of the shear wall buildings. The proposed research encompasses a comprehensive fragility analysis for seismic vulnerability of shear wall buildings in Canada. The first phase of the investigation involves shear wall buildings with different heights (hence different structural periods), designed based on the 2010 National Building Code of Canada. The second phase involves shear wall buildings designed prior to 1975, representing pre-modern seismic code era. The third phase involves the evaluation of pre-1975 shear wall buildings with irregularities. 3-Dimensional simulations of the buildings were constructed by defining nonlinear modelling for shear wall and frame elements. These models were subjected to dynamic time history analyses conducted using Perform 3D software. Two sets of twenty earthquake records, compatible with western and eastern Canadian seismicity, were selected for this purpose. Spectral acceleration and peak ground acceleration were chosen as seismic intensity parameters and the first storey drift was selected as the engineering demand parameter which was further refined for irregular cases. The earthquake records were scaled to capture the structural behaviour under different levels of seismic excitations known as Incremental Dynamic Analysis. The resulting IDA curves were used as the input for seismic fragility analysis. Fragility curves were derived as probabilistic tools to assess seismic vulnerability of the buildings. These curves depict probability of exceeding immediate occupancy, life safety and collapse prevention limit states under different levels of seismic intensity.

Wood-frame shear wall structures are widely used for residential and commercial buildings. These buildings are lightweight, have very ductile connections and includes multiple load paths. The main objective of this dissertation is to evaluate the seismic performance of a wide range of wood-frame shear wall building designs under the influence of modeling and analysis parameter variations. The first step towards the broad objective of seismic performance evaluation is to identify the different modeling and analysis parameters that can have a potential influence in the seismic response variations. The major variations considered in this study include level of critical damping, analytical modeling of damping, hysteresis model shape variations, ground motion characteristics, level of gravity loads, and floor acceleration variations. A subset of building model designs that were originally designed for the development of FEMA P-695 methodology is adapted for the numerical evaluations and a baseline for the variations is established. To study the sensitivity of inherent damping in wood-frame shear wall structures, an extensive literature survey is completed to find the experimentally observed damping levels in these buildings. Later, nonlinear dynamic analysis is performed for the range of damping levels using different Rayleigh damping models. Ground motion scaling methods, source-to-site distance, and peak intensity levels are the selected variations in ground characteristic group. To assist with the ground motion scaling procedures, a computational toolkit is created to produce amplitude and spectrum matched ground motions for response history analysis. The particular hysteresis model CASHEW that is used for the wood-frame shear wall system has a specific load-displacement shape which is a function of the shear wall design. Three key parameters of this model are varied in a range of values that were observed during experimental tests and seismic performance responses are computed for this variations. From the performance evaluations it is observed that the seismic response is quite sensitive to several of the modeling parameter variations and analysis variations mentioned above and has a unique response based on the design of the building. The range of performance variations for the different models are outlined in the chapters included in this dissertation. / Ph. D.