1 |
Study of solidification and volume change in lamellar cast iron with respect to defect formation mechanismsSvidró, Péter January 2013 (has links)
Lamellar cast iron is a very important technical alloy and the most used material in the casting production, and especially in the automotive industry which is the major consumer. Beside the many great properties, it is inclined to form casting defects of which some can be prevented, and some may be repaired subsequently. Shrinkage porosity is a randomly returning problem, which is difficult to understand and to avoid. This defect is a volumetric deficiency which appear as cavities inside the casting in connection to the casting surface. Another frequent defect is the metal expansion penetration. This defect is a material surplus squeezed to the casting surface containing sand inclusion from the mold material. Shrinkage porosity is usually mentioned together with metal expansion penetration as the formation mechanism of both defects have common roots. It is also generally agreed, that these type of defects are related to the volumetric changes occurring during solidification. Additionally, the formation of these defects are in connection with the coherency of the primary austenite dendrites. The purpose of this work was to develop knowledge on factors affecting a volume-change related casting defect formation in order to minimize the presence of these defects in engine component production. This was done by extending the existing solidification investigation methods with novel solutions. Introduction of expansion force measurement in the determination of dendrite coherency combined with multi axial volume change measurement refine the interpretation of the solidification. Comparison of registered axial and radial linear deformation in cylindrical samples indicated an anisotropic volume change. Different methods for dendrite coherency determination have been compared. It was shown that the coherency develops over an interval. Dependent on the added inoculant the coherency is reached at different levels of fractions of a solidified primary phase. It is also shown, that inoculation has an effect on the nucleation and growth of the primary phase. Quantitative image analysis has been performed on the primary phase in special designed samples designed to provoke shrinkage porosity and metal expansion penetration. It was found, that the inter-dendritic space varies within a casting. This was explained by the coarsening of the primary dendrites which originates from differences in the local time of solidification. / <p>QC 20131210</p>
|
2 |
Welding with Low Alloy Steel Filler Metal of X65 Pipes Internally Clad with Alloy 625: Application in Pre-Salt Oil ExtractionO'Brien, Evan Daniel 28 December 2016 (has links)
No description available.
|
3 |
Snížení nákladů na výrobu odlitků ze slitin hliníku / Costs reduction in production of Al-alloy castingsNováková, Lucie January 2010 (has links)
This thesis deals with solving the most serious internal defects in castings made of aluminum alloys which are cast in sand molds in Slévárna a modelárna Nové Ransko Ltd. The problem solving contains a description of the problematic castings with the investigation of the structure and phases and subsequent detailed analysis of their production. The Author of this thesis also examines the influence of Fe and Mn on a possible formation of the internal porosity with the help of test meltings with the evaluation of the internal structural change. The Author’s design solution is a close checking of chemical composition with regard to the ratio Mn / Fe present in the alloy, the purchase of Foundry Degassing Unit to reduce gassiness of melted metals and better control of gassiness with the help of the appropriate equipment for the density Dichte index.
|
Page generated in 0.1672 seconds