A cement material has been developed that has a controllable set time, compressive strength of about 50 MPa and shrinkage of under 2% when heated to 960 degrees centigrade. The main compound of this material has been shown to be the potassium analogue of struvite, in which potassium ion is substituted for the ammonium ion. The cement is formed by reacting a slurry made with potassium carbonate and monoammonium phosphate with magnesium oxide. Ihe amount and rate of addition of water to the mixture is controlled to determine the set time. It has been demonstrated that this cement may be used as a matrix in conjunction with cenospheres or cellulose fibres to form a low density composite material, and with silica powder to form a high strength composite. As well as optimising the cement mix for maximum strength and minimum shrinkage, a variety of properties of the K-cement were investigated. It was found that long term exposure of the cement to the atmosphere does not result in the formation of magnesium carbonate, but long term exposure to saline solutions can result in the formation of dypingite on the surface. No effect on strength was observed as a consequence of the age of the slurry or the cement, within 1-2 weeks / Doctor of Philosophy (PhD)