91 |
Robust Repetitive Control of DC/AC ConverterWang, Sing-han 29 August 2012 (has links)
This thesis applies digital repetitive control to a single-phase DC-to-AC converter,
with some proposed designs to improve stability and enhance performance of the
converter under various load variations.
A practical DC-to-AC converter is required to convert DC power to stable AC
power with low harmonic distortion when attached to various linear or nonlinear loads.
This thesis combines repetitive control with feedback dithering modulation and optimal
state feedback to control the converter. The repetitive control is responsible for
regulating output power and eliminating harmonics, while the feedback dithering
modulation for switching the power transistors with reduced switching noise and the
state feedback for stabilizing the converter under various load variations.
The presented control and modulation schemes of the power converter are
implemented on an FPGA (Field Programmable Gate Array). The experiments confirm
the excellent performance and robustness of the converter, indicating a total harmonic
distortion of less than 0.5% for the converter when attached to various linear or
nonlinear loads.
|
92 |
Development Of An Electrical Machines Analysis And Optimum Design Software PackageGoynuk, Yilmaz 01 June 2008 (has links) (PDF)
In this study, three different programs are developed for the analysis of the
three-phase induction motor, single-phase capacitor type induction motor
and switched reluctance motor. The programs are developed by using Pascal
and C++ programming languages. In the performance calculations of motors,
analytical methods are used and these methods are tested for accuracy.
These programs have also capabilities to design an optimum motor, which
meets a set of performance, material and manufacturing constraints while
minimizing the weight or any other defined objective function.
In addition, in this study, an optimization tool is used to obtain an appropriate
optimization method for the design of different types of motors.
The software is tested over different commercial motors. The results illustrates
that the performance calculations and optimization approach of the
programs lead to good results.
|
93 |
Design Software Development For Induction MotorsIzguden, Mustafa 01 June 2011 (has links) (PDF)
The purpose of this thesis has been to convert two softwares called TPCAD (Three Phase Induction Machine Computer Aided Desing) and SPCAD (Single Phase Induction Machine Computer Aided Design) developed earlier for the design and analysis of three and single phase induction machines to meet the needs of motor manufacturing industry so that they can be run in windows environment. Furthermore, it was aimed to include features such as double cage motor analysis and design, to provide a facility designed motor lamination can be drawn for the user to see and facilitate sharing the designed lamination with other professional programs such as finite element analysis or thermal analysis etc.
As a result of this study, a user friendly design tool facilitating the design process of induction motors has been upgraded by using C++ Microsoft Visual Studio .Net programming language. TPCAD and SPCAD are tested with different commercial motors. The results show that the full load performance calculations are within the range of 5% error for both programs. However, starting performance calculation errors are within 10% for TPCAD, and 8% for SPCAD.
|
94 |
Experimental Comparison Of Fluid And Thermal Characteristics Of Microchannel And Metal Foam Heat SinksAtes, Ahmet Muaz 01 September 2011 (has links) (PDF)
Doubling transistor count for every two years in a computer chip, transmitter and receiver (T/R) module of a phased-array antenna that demands higher power with smaller dimensions are all results of miniaturization in electronics packaging. These technologies nowadays depend on improvement of reliable high performance heat sink to perform in narrower volumes. Employing microchannels or open cell metal foam heat sinks are two recently developing promising methods of cooling high heat fluxes. Although recent studies especially on microchannels can give a rough estimate on performances of these two methods, since using metal foams as heat sinks is still needed further studies, a direct experimental comparison of heat exchanger performances of these two techniques is still needed especially for thermal design engineers to decide the method of cooling.
For this study, microchannels with channel widths of 300 µ / m, 420 µ / m, 500 µ / m and 900 µ / m were produced. Also, 92% porous 10, 20 and 40 ppi 6101-T6 open cell aluminum metal foams with compression factors 1,2, and 3 that have the same
finned volume of microchannels with exactly same dimensions were used to manufacture heat sinks with method of vacuum brazing. They all have tested under same conditions with volumetric flow rate ranging from 0,167 l/min to 1,33 l/min and 60 W of heat power. Channel height was 4 mm for all heat sinks and distilled water used as cooling fluid. After experiments, pressure drops and thermal resistances were compared with tabulated and graphical forms. Also, the use of metal foam and microchannel heat sinks were highlighted with their advantages and disadvantages for future projects.
|
95 |
Pressure loss associated with flow area change in micro-channelsChalfi, Toufik Yacine 06 July 2007 (has links)
Pressure drop across miniature-scale flow disturbances, including abrupt flow area changes, is an important source of error and confusion in the literature. Such pressure drops are frequently encountered in experiments, where they are often estimated using methods and correlations that have been developed based on experimental data obtained in conventional systems. However, physical arguments as well as the relatively few available experimental observations indicate that such pressure drops in microchannel systems are likely to be different than what is known about similar phenomena in conventional flow systems. Experimental data dealing with pressure drop associated with two-phase flow across abrupt flow area changes in microchannels are scarce, however, and the available data are insufficient for the development of reliable predictive methods.
In this investigation, experiments were conducted using a test section consisting of two capillaries, one with 0.84 mm, and the other with 1.6 mm inner diameters. A multitude of pressure transducer ports were installed along the two capillaries, and allowed for the measurement of the pressure gradients over the entire test section. The test section allowed for the measurement of frictional pressure gradients in the two straight channels, as well as pressure drops caused by the flow area expansion and contraction depending on the flow direction, for single-phase as well as two-phase flows. These measurements were performed over a wide range of parameters, using air as the gaseous phase, and room-temperature water as the liquid phase. The single-phase flow data were compared with existing conventional correlations, and with predictions of CFD simulations using the Fluent computer code.
|
96 |
Διερεύνηση της λειτουργίας και κατασκευή μονοφασικού αντιστροφέα για διασύνδεση ανεμογεννήτριας μικρής ισχύος με το δίκτυο χαμηλής τάσηςΓρυπαίος, Παναγιώτης 04 May 2011 (has links)
Η παρούσα διπλωματική εργασία πραγματεύεται τη μελέτη μίας διάταξης ανεμογεννήτριας 1kW με σύγχρονη μηχανή μόνιμων μαγνητών και με ανορθωτική γέφυρα διόδων στην έξοδό της καθώς και τη διασύνδεση αυτής με το εναλλασσόμενο δίκτυο χαμηλής τάσης. Επιπρόσθετα πραγματεύεται την κατασκευή του μονοφασικού αντιστροφέα που ενσωματώνεται στην εν λόγω τοπολογία. Η εργασία αυτή εκπονήθηκε στο Εργαστήριο Ηλεκτρομηχανικής Μετατροπής Ενέργειας του Τμήματος Ηλεκτρολόγων Μηχανικών και Τεχνολογίας Υπολογιστών της Πολυτεχνικής Σχολής του Πανεπιστημίου Πατρών.
Απώτερος σκοπός της εργασίας είναι η συνολική κατασκευή μίας διάταξης δύο βαθμίδων για τη διασύνδεση της ανεμογεννήτριας με το δίκτυο χαμηλής τάσης. Οι διατάξεις αυτές περιλαμβάνουν μια πρώτη βαθμίδα ανύψωσης της τάσης της ανεμογεννήτριας και μια δεύτερη βαθμίδα που μετατρέπει τη συνεχή τάση σε εναλλασσόμενη (αντιστροφέας) και παράγει ρεύμα συμφασικό με την τάση του δικτύου (μοναδιαίος συντελεστής ισχύος).
Αρχικά παραθέτουμε και συγκρίνουμε τις τεχνολογίες διασύνδεσης ανεμογεννητριών στο δίκτυο χαμηλής, μέσης και υψηλής τάσης στοχεύοντας στο να δοθεί στον αναγνώστη μια σφαιρική άποψη του υπό μελέτη θέματος.
Στη συνέχεια παραθέτουμε μια βήμα προς βήμα θεωρητική ανάλυση όλων των εμπλεκομένων μονάδων της τοπολογίας. Πιο συγκεκριμένα πέραν της ανάλυσης της ανεμογεννήτριας, παραθέτουμε στοιχεία για τον μετατροπέα ανύψωσης τάσης, ο οποίος κατασκευάστηκε στα πλαίσια της διπλωματικής εργασίας του συναδέλφου Κ.Περάκη, καθώς και μελετούμε τον μονοφασικό αντιστροφέα. Επιπρόσθετα, μελετούμε τη μέθοδο παλμοδότησης του μονοφασικού αντιστροφέα, που είναι γνωστή υπό τον όρο “Ημιτονοειδής Διαμόρφωση του Εύρους Παλμών” (SPWM) τόσο με μονοπολική όσο και με διπολική τάση εξόδου.
Επόμενο βήμα αποτέλεσε η διαστασιολόγηση ολόκληρου του υπό μελέτη συστήματος και η μετέπειτα προσομοίωση του μονοφασικού αντιστροφέα.
Τέλος αναλύουμε τα τεχνικά χαρακτηριστικά του αντιστροφέα που κατασκευάστηκε, καθώς και των κυκλωμάτων από τα οποία αποτελείται και περιγράφουμε τη διαδικασία παραγωγής του κώδικα προγραμματισμού του μικροελεγκτή καθώς και των τεχνικών που χρησιμοποιήσαμε για τη ρύθμιση των παλμών. Παράλληλα παραθέτουμε παλμογραφήματα και μετρήσεις που προέκυψαν από τα πειράματα που διενεργήσαμε μετά την ολοκλήρωση της κατασκευής σε εργαστηριακό περιβάλλον / -
|
97 |
Projeto, construção, simulação, implementação e testes de um gerador a relutância chaveada monofásico / Design, construction, simulation, implementation and testing of a single-phase switched reluctance generatorEduardo Sylvestre Lopes de Oliveira 04 July 2011 (has links)
O objetivo do trabalho é apresentar o funcionamento de um gerador a relutância chaveado monofásico. Para isso, foi desenvolvido um modelo computacional em ambiente Matlab Simulink, fazendo-se a comunicação entre diferentes partes do sistema. O comportamento da dinâmica de geração é apresentado para diferentes pontos do sistema, e testes experimentais realizados em um pequeno protótipo confirmam as características funcionais desta máquina. Ensaios realizados comprovam sua funcionalidade e simplicidade de operação, tendo estabilidade de geração para ampla faixa de velocidade de funcionamento, caracterizando uma máquina promissora, robusta e eficiente para aplicações especiais. / This work presents a single-phase switched reluctance machine operating as a generator. For that purpose, a computational model was developed in Matlab Simulink environment, wherein all the system components, such as voltage source, drive and machine model, and load were integrated. The current and voltage behavior for several points of operations are presented. Furthermore, experimental tests were also carried out in a simple prototype to validate its functionality and simplicity of operation, providing a stable power generation over a wide range of speed. The results showed that the single-phase switched reluctance generator can be robust, efficient, and promising for especial applications.
|
98 |
Operation of Parallel Connected Converters as a Multilevel ConverterKannan, Vijay 04 June 2018 (has links) (PDF)
The still increasing demand of electrical energy and the rising popularity of renewable energy sources in today's world are two important developments that necessitate the need for innovative solutions in the field of power electronics. Parallel operation of converters is one possible method in trying to bridge an increased current demand.
The classical two-level converters, which are the standard in low voltage applications, are rarely adopted in medium and high voltage applications due to the voltage limits on power semiconductor devices. That is one reason for the growing popularity of multilevel converter topologies in medium and high-voltage applications. Although an increase in the number of voltage levels of a multilevel converter has its advantages, there are also challenges posed due to the increased number of switching devices. This has resulted in three-level converters being the most popular compared to converters of higher voltage levels. In this dissertation, the unified operation of parallel connected three-level converter units as a multilevel converter of higher voltage levels is proposed.
The mathematical basis for operating parallel connected converter units as a single multilevel converter and the governing equations for such systems are derived. The analysis and the understanding of these equations are important for assessing practicality of the system and devising appropriate control structures. Parallel operation of converter units operating as multilevel converter have their own set of challenges, the two foremost being that of load-sharing and the possibility of circulating and cross currents. Developing solutions to address these challenges require a thorough understanding of how these manifest in the proposed system. Algorithms are then developed for tackling these issues. The control structures are designed and the developed algorithms are implemented. The operation of the system is verified experimentally. / Die weiterhin steigende Nachfrage nach elektrischer Energie und die zunehmende Verwendung erneuerbarer Energiequellen in der heutigen Welt sind zwei wichtige Entwicklungen, die die Notwendigkeit innovativer Lösungen im Bereich der Leistungselektronik erfordern. Der Parallelbetrieb von Stromrichtern ist eine mögliche Methode, um einen erhöhten Strombedarf zu decken.
Der klassische Zweipunkt-Spanungszwischenkreisstromrichter, der bei Niederspannungsanwendungen weit verbreitet ist, wird aufgrund der Spannungsgrenzen für Leistungshalbleiterbauelemente zunehmend weniger in Mittel- und Hochspannungsanwendungen eingesetzt. Die begrenzte Spannungsbelastbarkeit der Leistungshalbleiterbauelemente ist ein Grund für die wachsende Beliebtheit von Mehrpunkt-Stromrichtertopologien in Mittelund Hochspannungsanwendungen. Obwohl eine Erhöhung der Anzahl der Spannungsstufen eines Mehrpunkt-Stromrichters Vorteile hat, gibt es auch Herausforderungen und Nachteile aufgrund der erhöhten Anzahl von Leistungshalbleitern. Dies hat dazu geführt, dass der Dreipunkt-Stromrichter die verbreiteste Topologie im Vergleich zu anderen Stromrichtern mit einer höheren Anzahl von Spannungsstufen ist. In dieser Dissertation wird der Betrieb von parallel geschalteten Dreipunkt-Stromrichtereinheiten als ein Mehrpunkt-Stromrichter mit erhöhter Anzahl an Spannungsstufen vorgeschlagen.
Die mathematische Basis für den Betrieb von parallel geschalteten Stromrichtereinheiten als ein Mehrpunkt-Stromrichter und die beschreibenden Gleichungen eines solchen Systems werden abgeleitet. Die Analyse und das Verständnis dieser Gleichungen sind wichtig für die Beurteilung der Praktikabilität des Systems und die Erarbeitung geeigneter Regelstrukturen. Der parallele Betrieb von Stromrichtereinheiten hat seine eigenen Herausforderungen, wobei die beiden wichtigsten die Lastverteilung und die Möglichkeit von Kreis- und Querströmen sind. Die Entwicklung von Lösungen zur Bewältigung dieser Herausforderungen erfordert ein gründliches Verständnis dafür, wie sich diese Phänomene in dem vorgeschlagenen System manifestieren. Algorithmen zur Lösung dieser Probleme werden anschlieend entwickelt. Die Regelstrukturen werden entworfen und die entworfenen Algorithmen implementiert. Die Funktionsweise des Systems wird experimentell überprüft.
|
99 |
Modeling and Characterization of Ammonia Injection and Catalytic Reduction in Kyrene Unit-7 HRSGJanuary 2011 (has links)
abstract: ABSTRACT The heat recovery steam generator (HRSG) is a key component of Combined Cycle Power Plants (CCPP). The exhaust (flue gas) from the CCPP gas turbine flows through the HRSG − this gas typically contains a high concentration of NO and cannot be discharged directly to the atmosphere because of environmental restrictions. In the HRSG, one method of reducing the flue gas NO concentration is to inject ammonia into the gas at a plane upstream of the Selective Catalytic Reduction (SCR) unit through an injection grid (AIG); the SCR is where the NO is reduced to N2 and H2O. The amount and spatial distribution of the injected ammonia are key considerations for NO reduction while using the minimum possible amount of ammonia. This work had three objectives. First, a flow network model of the Ammonia Flow Control Unit (AFCU) was to be developed to calculate the quantity of ammonia released into the flue gas from each AIG perforation. Second, CFD simulation of the flue gas flow was to be performed to obtain the velocity, temperature, and species concentration fields in the gas upstream and downstream of the SCR. Finally, performance characteristics of the ammonia injection system were to be evaluated. All three objectives were reached. The AFCU was modeled using JAVA - with a graphical user interface provided for the user. The commercial software Fluent was used for CFD simulation. To evaluate the efficacy of the ammonia injection system in reducing the flue gas NO concentration, the twelve butterfly valves in the AFCU ammonia delivery piping (risers) were throttled by various degrees in the model and the NO concentration distribution computed for each operational scenario. When the valves were kept fully open, it was found that it led to a more uniform reduction in NO concentration compared to throttling the valves such that the riser flows were equal. Additionally, the SCR catalyst was consumed somewhat more uniformly, and ammonia slip (ammonia not consumed in reaction) was found lower. The ammonia use could be decreased by 10 percent while maintaining the NO concentration limit in the flue gas exhausting into the atmosphere. / Dissertation/Thesis / M.S. Mechanical Engineering 2011
|
100 |
Control, Design, and Implementation of Quasi Z-source Cascaded H-Bridge InverterAl-Egli, Fares, Mohamed Moumin, Hassan January 2018 (has links)
This report is about control, design and implementation of a low voltage-fed quasi Z-source three-level inverter. The topology has been interesting for photovoltaic-systems due to its ability to boost the incoming voltage without needing an extra switching control. The topology was first simulated in Simulink and later implemented on a full-bridge module to measure the harmonic distortion and estimating the power losses of the inverter. An appropriate control scheme was used to set up a shootthrough and design a three-level inverter. The conclusion for the report is that the quasi Z-source inverter could boost the DC-link voltage in the simulation. But there should be more consideration to the internal resistance of the components for the implementation stage as it gave out a lower output voltage than expected.
|
Page generated in 0.0465 seconds