1 |
Consequences of using Eurocode 5 for design of steel-timber connectionsDebarbouille, Quentin January 2011 (has links)
Timber construction has increased in popularity in different countries in Europe thanks to a new material apparition and environmental stakes. In order to construct a timber structure we use different types of connections. The design of connections is complex since it is influenced by many different factors. However, the connection is the weak part of the structure and has high risk of collapse. Therefore the connection often determines the capacity of the structure.In 1975 the commission of the European Community decided to harmonize of technicalities and rules of design in the field of construction. The aim is to increase the competition between companies and simplify the trade of products and services within the European Union. The regulation for timber structures is Eurocode 5 (EC5).This study investigates how the EC5 can influence the design of a connection with a single shear plane for a steel-timber connection with nails or screws. This study is based on the comparison between the connection properties obtained using the EC5 and those recommended in a brochure from one of the large glulam manufacturers in Sweden based on the Swedish regulations.The outcome is that the new regulation has a strong impact on the design of the steel plates. The requirement in minimum spacing imposes a specific dimension and position of the fasteners. Moreover, the capacity of the connection is influenced by the distance between the fasteners parallel to the grain, which determines the effective number of fasteners involved in the connection.
|
2 |
The Effects of Bolt Spacing on the Performance of Single-Shear Timber Connections Under Reverse-Cyclic LoadingAlbright, Dustin Graham 15 August 2006 (has links)
Much previous experimentation related to wood structures has employed monotonic loading to replicate static situations. However, instances of natural hazards have raised interest in the response of structural connections to dynamic loads. This increased interest led the Consortium of Universities for Research in Earthquake Engineering (CUREE) to develop a testing protocol for reverse-cyclic loading, which involves cycling loads through zero in order to test specimens in both tension and compression. With the CUREE testing protocol in place, recent research has been devoted to understanding the effects of reverse-cyclic loading on multiple-fastener connections.
Experimentation by Heine (2001), Anderson (2002), Billings (2004) and others contributed to a better understanding of bolted connection behavior under reverse-cyclic loading. However, some questions remained. Billings was unable to consistently produce yield modes III and IV, meaning that her suggested bolt spacing of seven times the bolt diameter (7D) could not be applied to connections subject to these yield modes without further testing. In addition, the work of Anderson and Billings raised questions regarding the proper measurement of bending yield strength in bolts and the relationship between the bending yield strength and the tensile yield strength. These topics are each addressed by this project and thesis report.
Results of the connection testing presented in this report can be used in conjunction with the work of Anderson and Billings to critically evaluate the 4D between-bolt spacing recommended by the National Design Specification (NDS) for Wood Construction (AF&PA, 2001). Results of the bolt testing provide a supplement to the search for a reliable method for the measurement of bending yield strength in bolts. / Master of Science
|
3 |
Characterization and Analysis of Damage Progression in Non-Traditional Composite Laminates With Circular HolesTreasurer, Paul James 20 November 2006 (has links)
Carbon Fiber / Epoxy Laminates are increasingly being used in the primary structure of aircraft. To make effective use these materials, it is necessary to consider the ability of a laminate to resist damage, as well as material strength and stiffness. A possible means for improving damage tolerance is the use of non-traditional composite laminates, in which the longitudinal 0 plies are replaced with 5 or 10 plies. The main objectives of this collaborative Georgia Tech / Boeing research was the characterization of these non-traditional laminates, and the determination of appropriate lamina-level analytical techniques that are capable of predicting the changes caused by the use of slightly off-axis longitudinal plies. A quasi-isotropic [45/90/-45/theta/45/90/-45/-theta]s and hard [45/theta/-45/theta/90/45]s lay-up, where theta =0,5 or 10, were tested in open hole tension, filled hole tension, open hole compression, single shear bearing, and unnotched tension. These coupon level tests illustrated the effects of lay-up, notch constraint, and load type on traditional and non-traditional laminates. Die penetrant enhanced in-situ radiography was performed to determine the extent of damage suppression. The use of non-traditional laminates was found to reduce longitudinal ply cracking and delamination, with significant effect on the stress distribution around the notch. The use of non-traditional laminates also resulted in a 15%-20% improvement in bearing strength of the traditional laminates. Several predictive techniques were implemented to evaluate their ability to predict the effect of slight changes in ply orientations. A progressive damage model was written to compare Tsai-Wu, Hashin, and Maximum Stress unnotched strength criterion. Additionally, several semi-empirical failure theories for notched strength prediction were compared with linear and bi-linear cohesive zone models to determine applicability to non-traditional laminates.
|
Page generated in 0.0442 seconds