The subject of this thesis is Headquarters of racing team. The building is designed wall system porotherm, ceilings are monolithic concrete and roofing of the building is a combination of green flat roofs and single-flat roof with steel trusses. The building is designed as a single-storey, only part of the plan of the hall is a two-storey building. The building consists of two functionally separate parts.

This diploma thesis on a topic “Nursery school in Třebíč” deals with a new building proposal of a nursery school. The building is situated in Třebíč, in a densely populated part of the town which is called Podklášteří. It is a brick single-storey detached building, mounted on a gentle slope with green vegetation. The layout of the building is divided into three departments and an operational part. In each department, there is a dressing room, food distribution, study and dining room, playroom with a cushy job, toy store, warehouse of folding beds and bedding, washroom, toilet, utility room and room for the air handling units. Departments are covered by wooden trusses which bear single-layer saddle-shaped roof with an extensive green vegetation. Above the operational part, there is a single-layer flat roof. Wall system is made of ceramic blocs of a system Porotherm and trusses are from a company called Vazníky D.N.K.

The aim of the diploma thesis is processing of the design documentation for realization of the construction of a kindergarten in Havlíčkův Brod. It is a detached single-storey building that is functionally divided into three basic parts – the middle one, that contains a canteen with a preparation area and a serving hatch of food, and two connected side parts, left one and right one, each one of them is used as a classroom of the kindergarten with capacity up to 20 children for each class. The structural system of the building is created by a masonry system made of hollow bricks. The floor structure is designed of prefabricated prestressed concrete floor slabs, the roofing of the building is made of warm flat roof with extensive green vegetation covering. The external wall is supplied by ventilated facade which one is created by contact thermal insulation and by facade cladding of cement-bonded particle board. The building is set in a lightly sloping terrain.

Work deals with variant design of steel structure of ice hockey stadium located in Opava. It is a three-aisled hall with shape consists of intersection of ellipse and rectangle with dimensions 70 x 82m. The roof has cylindrical shape with approx. 50 m radius. The building is about 14 m high. Object is divided to three parts – main aisle and two side aisles. The main aisle contains of a rectangle of dimensions 40 x 42 m and two semicircles of radius approx. 20 m. Frames of main aisle are made of arc roof truss connected to steel plate columns. The side aisles with rectangular shape with dimensions 15 x 42 m are connected to main aisle. The structure of side aisle is made of a sloped roof truss. Longitudinal bracing and cross bracing are used to obtain spatial rigidity of the structure. Roof and wall cladding is made of Kingspan sandwich panels.

The thesis of the project is testing station for cars and light utility vehicles with auto service. It is designed for building plot located in Brno, district Komín. The building is designed as a without basement, single-storey with flat roof. The project suggests paved roads and parking spaces for visitors and employees. The building is not designed as a low energetic.

The theme of this diploma thesis is design and check load-carrying steel structure of building for sport purposes in two variants. Building is situated in Holešov town. Primary emphasis is placed on purpose of this building and on her integration to the given locality. The steel structure is created by two objels, main (hall) and side part (admin. part). Both of this building have common east wall. Plan dimension of hall part is 40 on 40m and the highest point of this part is 15,9m height above ground. Admin. part is greated like frame with columns in 8x8m grid and 8m height. Overall height of this part is 8m. For analisys of internal forces was constructed spatial bar model which was used for an optimization of partial bars for both limit states. The cladding will be made by system of Kingspan panels.

Single-storey C-shaped building of kindergarten in Nový Jičín with flat green roof.The building is situated on the flat land. The plot is accessible by local road. Kindergarted has irregular plan. The ends are connected by connecting tunnel, which is partly below ground level. Courtyard facade is a vertical garden - green facade.

This master thesis is focused on elaboration of project documentation for constructing autosalon in Žďár nad Sázavou. Project and appendix are processed by current applicable laws, regulations and standarts. Designed object is situated on plat #6167/2. Both plat sis parts of cadastral area of Žďár nad Sázavou. There are all needed engineering netwoeks nearby. Object is divided on two functional parts, which are operationally and constructionally connected. First part is exhibition and representatice hall, which are capacity of 7 exhibited vehicles. Other partis formed by administrative facilities for staff including sanitary facilities for both staff and visitors. Second part is service for personal and light commercial vehicles with four working stations. Construction is designed reinforced concrete columnar structural system. Plan dimension autosalon is 31,06x22,6m. Plan dimension autoservise is 30,74x18,84m. The cladding autosalon is designed of ceramic tile 250mm. The cladding autoservis is designed of sandwich panel. Roof of building accross the surface is flat roof. Establishment of the object is a combination of footings and foundation belts. Cladding of exhibition hal lis more than 50% glazed. Parts of autosalon and autoservise are designed as sigle storey objects, while administrative part is designed as a two.

The subject of the diploma thesis is design and examination of supporting steel structure of the exhibition pavilion situated at the Brno Exhibition Centre, including a comparison with the second variant. The design emphasis has been placed on keeping the architectural character of building related to its purpose. The structure consists of 11 sections shaped as elliptical arcs, formed by truss frames with variable length of semi-axes, while the largest size (the smallest) is 13 m (7 m) for minor semi-axis and 20 m (14 m) for the main semi-axis, height is 16 m (10 m) and distance of support 38.92 m (25.30 meters). For the analysis of internal forces has been assembled spatial bar shaped model. Cladding is made of Kalzip system.

This master thesis is focused on elaboration of project documentation for constructing autosalon in Kopřivnice. Project and appendix are processed by current applicable laws, regulations and standarts. Designed object is situated on plat #419/2 and partly on plat #419/27. Both plats are parts of cadastral area of Kopřivnice. There are all needed engineering networks nearby. Object is divided on three functional parts, which are operationally and constructionally connected. First part is exhibition and representative hall, with capacity of 11 exhibited vehicles. Second part is formed by administrative facilities for staff including sanitary facilities for both staff and visitors. Third part is service for personal and light commercial vehicles with three working stations. Construction is designed partially reinforced concrete columnar structural system and partially of brick longitudinal structural system. The biggest plan dimension of building is 34.3x35.15m. The cladding is designed of sandwich blocks LIVETHERM tl.400mm. Roof of building accross the surface is flat roof with several height levels. Establishment of the object is a combination of footings and foundation belts. Cladding of exhibition hall is more than 50% glazed. Parts of service and autosalon are designed as sigle storey objects, while administrative part is designed as a two.