The design and the static estimation of the load-bearing steel structure of tribune roofing of the football stadium are the subject of this thesis. The football stadium is located in Brno. The main bearing system consists of 16 radially arranged truss girders with the console lining of 39,9 m. Column “trees” always support a pair of truss girders. The plan dimensions of the structure are 63,2 m x 155,0 m. The roof height above the ground level is 52,0 m. There were two variant of analysis elaborated. The design is made in accordance with the valid ČSN EN standards.

The subject of this Master’s thesis was recalculation and design two variants of existing supporting steel structure storey administrative building which is located in the complex of Jihomoravská plynárenská a.s. in the city center of Brno. Dimensions and disposition based on the specifications of the Master‘s thesis. The total height of the structure is 29.46 m and circular platform has a diameter of 16.088 m. The supporting structure of an existing building consists of circumferential lattice structure. The main supporting elements of both variants are columns. Option A has 8 columns. Option B has 16 columns. These two variants were preliminarily designed and statically evaluated. After that was made a comparison of variants, and one was selected for more detailed processing (Option A). This included the calculation of anchorage, draft of mounting joints, technical report and drawing documentation.

The construction of the concourse is designed from steel.Construction was designed in 2 variants.The construction of the hall is radially curved in plan view with a circular sector on the longitudinal side.Roof structure consists of eight trusses at an axial distance of 9 m.Tracks are arched truss designed as a parallel.Trusses are designed to span 40m.Maximum ground clearance hall at the top is 14 meters.Letištní hala byla řešena v programu Scia Engineer 2014 a součástí je i výkresová dokumentace.

This thesis is focused on designing a new multipurpose building with parts used for apartments, administration offices and a bar. The land, which the building is situated on, is located in the city of Olomouc. The structure consist of five above-ground floors and one underground floor, where a garage is designed. The vertical supporting construction are made of reinforced cast-in-place concrete columns, the horizontal of reinforced concrete cast-in-place boards, other vertical walls are made of sand-lime and aerated concrete blocks. The roof is warm flat.

This work deals with construction material research office building with eighteen floors to the street Šumavská 35 in Brno with ground plan dimensions of about 25 x 25 m. The structure consists of a reinforced concrete substructure and floors of steel frame. The scope of the survey will determine the quality of concrete in vertical supporting columns at level 1. PP structures using cores and subsequent laboratory testing. Another task will be to verify the status of moorings steel perimeter columns to the building of reinforced concrete pillars at the boundary of 1st basement and 1st floor.

The master´s thesis concerns with the design of the construction of the testing centre. The hall is divided in two parts, in one of those parts the office rooms are located. The precast concrete frame of the hall is composed by foundation pads, columns, secondary beams and crane beams, precast slabs, and prestressed girders. The thesis contains report, structural design, drawings of floor plans and sections, drawings of formwork and reinforcement, visualization and steps of construction.

The work is focused on assessing the structure of urban winter stadium, which will be located in Brno - Komarov. Winter stadium is designed according to standarts of ice hockey with a capacity of approximately 7 000 spectators. Of the 5 850 seating, 1 050 stalls and 100 in the VIP areas. Construction of hockey stadium is made of steel and steel-concrete columns, which together with composit transverse beam, reinforced concrete slab and bracings provide rigidity. Columns are supported by a set of bored piles with capitals. Roofing of the main part of the winter stadium is designed using a flat space frame having a maximum height of 4,5 m. Roof for entrance halls are design by a system of truss girder and purlins, which are hardened bracings to increase spatial rigidity. The structures are made of steel S 355 and concrete C 25/30. For designing steel structures was used software Scia ENGINEER and IDEA RS. Steel columns and composit beams are calculated by hand calculation. The total length of the hockey stadium is 111,5 meters, width outside the entrance hall is 82,02 m and the total width at the entrance hall is 96,85 m. The height of the building at the highest point is 25,6 meters.

The object of the diploma thesis is design and assessment of a steel lookout tower situated in Beskydy mountains. Two different variants were designed. The first variant is of square shaped plan and the second one is of hexagonal shaped plan. Both variants are spatial truss structures. They are shaped as hourglass. The variants were compared and the first one was chosen to be further developed. The lookout tower is 36 meters high and it is divided by floors. One floor is 3,6 meters high. The widest section is 8 meters, the narrowest section is 5 meters wide. The structure is pin-supported into concrete foundation. The concrete is class C25/30. The roof covering is made of trapezoidal sheet of class S280GD. Each steel element is made of steel of class S355.

The thesis focuces on project documentation for a construction project with the aim to design home for children under institutional care. Located on the outskirts of Skuteč, the building is three-storey, detached and partially basemented. The basement area lays on the slab foundations and the first floor on strip foundations. Vertical structures are made of ceramic blocks and local reinforced concrete columns while horizontal structures are made of reinforced concrete slabs and wooden trusses over the gym. The building is covered by a vegetated flat roof. The building houses six residential units for six family groups with a total capacity of 43 children. The basement includes gym and fitness with technical facilities. The first floor consists of three residential units, changing rooms for the gym and kitchen with facilities. The second floor houses remaining three residential units, offices and the refectory. The upper floor is used for children´s education and entertainment.

The master's thesis deals with the steel structures in building industry. The aim of this paper is to propose and statically evaluate the load-bearing steel structure of railway station in Vsetín. After solving the construction load by the roof cladding and external cladding, it follows by an assessment of individual elements of construction, including an assessment of their joints. From a static perspective, the roof structure consists of two diagonal arches which are joined into each other in the top and two longitudinals frames. The entire structure is designed with an emphasis on freedom of internal layout independent of the load-bearing structure.