1 |
Dimensionless scale-up of hydrocyclones for separation of concentrated suspensionsOrtega-Rivas, Enrique January 1989 (has links)
No description available.
|
2 |
Hydrocyclones for the separation of yeast and protein particlesYuan, Huixin January 1996 (has links)
No description available.
|
3 |
Chemically enhanced gravitational solid-liquid separation for the management of phosphorus in liquid swine manureAgomoh, Ikechukwu Vincent 11 September 2012 (has links)
This laboratory column (125 cm high, 15 cm diameter) research investigated solids and P removal from liquid swine manure amended with calcium carbonate, magnesium sulphate, alum and polyacrylamide (PAM). Results showed that PAM was the most effective amendment for enhancing solids removal from manure containing 1% initial total solids (TS). The effectiveness of PAM was lower at 5% and 8% than at 1% due to resuspension of solids occurring at settling times beyond 4 h. After 24 h of settling, P removal from non-amended manure was comparable to that in amended manure and decreased with TS concentration for all amendments except alum, which was equally effective at all TS concentrations. These results indicate that, for manure containing 1% TS, P can be adequately removed by gravity separation without addition of chemical amendments while alum is a more effective amendment for removing P from manure containing higher (5% and 8%) TS.
|
4 |
Chemically enhanced gravitational solid-liquid separation for the management of phosphorus in liquid swine manureAgomoh, Ikechukwu Vincent 11 September 2012 (has links)
This laboratory column (125 cm high, 15 cm diameter) research investigated solids and P removal from liquid swine manure amended with calcium carbonate, magnesium sulphate, alum and polyacrylamide (PAM). Results showed that PAM was the most effective amendment for enhancing solids removal from manure containing 1% initial total solids (TS). The effectiveness of PAM was lower at 5% and 8% than at 1% due to resuspension of solids occurring at settling times beyond 4 h. After 24 h of settling, P removal from non-amended manure was comparable to that in amended manure and decreased with TS concentration for all amendments except alum, which was equally effective at all TS concentrations. These results indicate that, for manure containing 1% TS, P can be adequately removed by gravity separation without addition of chemical amendments while alum is a more effective amendment for removing P from manure containing higher (5% and 8%) TS.
|
5 |
Desempenho de um hidrociclione de geometria "rietema" como pré filtro para sistemas de irrigação /Cruz, Othon Carlos da. January 2008 (has links)
Orientador: José Renato Zanini / Banca: Antônio Carlos Barreto / Banca: Tarlei Arriel Botrel / Banca: Luiz Carlos Pavani / Banca: Antônio Sergio Ferraudo / Resumo: Os hidrociclones são equipamentos amplamente utilizados pela indústria em processos envolvendo separação sólido-líquido, porém, ainda, pouco divulgados na agricultura irrigada brasileira. Buscou-se neste trabalho determinar a perda de carga e avaliar o desempenho de um hidrociclone de geometria "Rietema" como pré-filtro de partículas sólidas. Os testes foram realizados no Centro Federal de Educação Tecnológica de Uberaba - MG - Brasil utilizando um hidrociclone de geometria "Rietema". Este equipamento possui um diâmetro de 19,20 cm na parte cilíndrica e opera com vazões variando entre 10 m3 h-1 e 27 m3 h-1. Os materiais particulados usados em suspensão foram: solo franco-argiloso e areia de rio. Os resultados mostraram que a perda de carga máxima média foi de 52 kPa e 47 kPa para as suspensões aquosas de areia e solo, respectivamente. Seu melhor desempenho ocorreu operando com suspensão aquosa de areia, apresentando eficiência total de 92,31% para a vazão de 26,97 m3 h-1. Dentre as conclusões pode-se inferir que o equipamento avaliado é eficiente para remoção de partículas de areia, podendo ser utilizado como pré-filtro em sistemas de irrigação. / Abstract: The hydrocyclones are equipments widely used by industry in cases involving solid-liquid separation, but still, little reported in brazilian irrigated agriculture. The proposal of this research was to determining the head loss and evaluate the performance of a hydrocyclone of geometry "Rietema" as a pre-filter of solid particles. The tests were performed in the Centro Federal de Educação Tenológica de Uberaba - MG - Brazil using a hydrocyclone of Rietema geometry. This equipment has a diameter of 19.20 cm at the cylindrical part and operates with flows ranging between 10 m3 h-1 and 27 m3 h-1. The materials used in particulate suspension were: clay loam soil and sand from river. The results showed that the average maximum head loss was 52 kPa and 47 kPa of aqueous suspensions of sand and soil, respectively. Its best performance occurred operating with slurry of sand, presenting total efficiency of 92.31% for flow rate of 26.97 m3 h-1. Among the conclusions can be inferred that the equipment is judged effective at removing particles of sand and can be used as pre-filter in irrigation systems. / Doutor
|
6 |
Definição de tecnologias para desaguamento de ultrafinos ricos de minério de ferro : uma aplicação na Vale Carajás - Pará - BrasilOrsine, Noeber Maciel January 2014 (has links)
O minério de ferro produzido no complexo de Carajás traz consigo características mineralógicas que conferem um elevadíssimo teor de Fe em todas as suas frações granulométricas. Dessa forma, ao final da cadeia produtiva, tanto os produtos comerciais mais grosseiros quanto os finos contem cerca de 62% de Fe contido na sua composição. Importante destacar que em Carajás as fases no processamento desse minério são apenas para cominuição e classificação por tamanho. Não existem etapas de concentração e os produtos são diferenciados por suas respectivas curvas granulométricas: o “granulado” - mais grosseiro (> 13 mm), o “Sinter-Feed” (< 13 mm e > 0,5 mm) e o “pellet feed” (< 0,15 mm). Garantir a correta distribuição granulométrica da matéria prima é uma premissa de mercado. A ultima etapa da classificação é feita através de hidrociclones e gera um overflow ultrafino de altíssima superfície específica maior que 6.500 Blaine e com 45% até 95 % < 7 μm. E ainda possui um elevado teor de Fe - cerca de 62 %. Dessa forma os objetivos gerais dessa pesquisa buscaram a solução para essa oportunidade de recuperar e vender esses rejeitos. O estudo sugeriu através de ensaios com tecnologias capazes de desaguar os ultrafinos gerados para 9,00 % de umidade, que é o valor que permite a movimentação e o manuseio desses rejeitos, além de permitir sua incorporação na blendagem de produtos mais grossos. Desse modo, foram realizados experimentos em diversos laboratórios externos e em escala piloto na Usina de Carajás com amostras dos dois rejeitos ultrafinos das duas fases de hidrociclonagem: o natural e o moído. Ficou evidente que o equipamento tem de combinar necessariamente e de forma eficiente dois fatores essências ao desaguamento: elevadíssimas pressões e altas temperatura na operação desses ultrafinos. A produtividade atingida foi da ordem de 50 t/h x m² para o rejeito da hidrociclonagem do Sinter Feed e 40 t/h x m² para o rejeito dos hidrociclones da Moagem. / The Iron ore that is produced in Carajás mining complex brings mineralogical characteristics that give a very high Fe content in all its size fractions. Thus, at the end of the production chain both coarser and fine contains about 62% Fe contained in its composition. Importantly, in Carajás stages in the processing of this ore are for reduction and classification by size. There is thus no concentration steps and products are differentiated by their respective size distribution curves: the "grain" - coarser (> 13 mm), the "Sinter-Feed" (<13 mm and > 0.5 mm) and the "pellet feed" (<0.15 mm). Ensure proper particle size distribution of the raw material is a market premise. The last step of classification is made using hydrocyclones and generates an overflow ultrafine high specific surface area greater than 6.500 Blaine and with 45% to 95% <7 μm. And has a high Fe content - about 62%. The overall objectives of this research sought the solution to this opportunity to recover and sell these “tailings”. The study suggested by testing with technologies capable of flowing into the ultrathin generated to 9.00% of moisture, which is the value that allows movement and handling these wastes, and allows their incorporation into the blending of thicker products. Thus, experiments were carried out in several external laboratories and pilot-scale plant in the Carajás with samples of both ultrafine “tailings” of the two phases of hydrocycloning: the natural and the ground. It was evident that the equipment must necessarily match and two efficiently factors essences to dewatering: very high pressure and high temperature operation of these “tailings”. The productivity achieved was around 50 t/h x m² in reject of the Sinter Feed hydrocycloning and 40 t/h x m² to reject of the grinding hydrocyclones.
|
7 |
Aplicação de sedimentadores de fluxo vertical na separação sólido-líquido de água de processo em usinas de beneficiamento de carvão mineral na região sul de Santa CatarinaSmaniotto, André Luiz Amorim January 2017 (has links)
O processo de espessamento e clarificação dos efluentes das usinas de beneficiamento de carvão mineral com a adoção de sedimentadores é uma prática consagrada ao longo de todo o mundo uma vez que é necessário o reaproveitamento da água utilizada tanto por questões econômicas como ambientais. O primeiro sedimentador, tipo espessador, a entrar em operação industrial na região carbonífera de Santa Catarina foi instalado na Mina Barro Branco da Carbonífera Rio Deserto em 2007. O equipamento era dotado de lamelas de PVC e foi instalado como alternativa às bacias de decantação, que apresentam alto custo de construção e operação. Contudo, o equipamento se mostrou ineficaz devido a deposição de sólidos nas lamelas. Essa dificuldade levou a adoção de outros modelos de sedimentadores de fluxo vertical que não utilizam lamelas. Esse trabalho apresenta os dados disponíveis da operação do equipamento com as lamelas na Mina Barro Branco e resultados atuais da operação dos sedimentadores da Mina Esperança sem lamelas. Nesse segundo caso foi medida a vazão, concentração de sólidos e dos metais ferro, alumínio e manganês, nos fluxos de entrada e saída. No efluente clarificado mediu-se ainda o pH e a turbidez. Registraram-se dados de uma operação satisfatória, com impacto importante na redução dos custos no transporte e deposição dos rejeitos finos e no tratamento do overflow clarificado possibilitando o descarte de acordo com a Legislação Ambiental. / The process of thickening and clarifying the effluents of mineral coal processing plants with the use of settlers is a well-established practice throughout the world since it is necessary to reuse the water used for both economic and environmental reasons. The first settler, a thickener type, to enter into industrial operation in the Santa Catarina coal region was installed at the Barro Branco Mine of the Carbonifera Rio Deserto in 2007. The equipment was equipped with PVC lamellae and was installed as an alternative to the decantation basins, which have a high cost of construction and operation. However, the equipment proved to be ineffective due to deposition of solids in the lamellae. This difficulty led to the adoption of other models of vertical flow settlers that do not use lamellae. This work presents the available data of the operation of the equipment with lamellae in the Mina Barro Branco and current results of the operation of the settlers in the Mina Esperança without lamellae. In this second case the flow, concentration of solids and iron, aluminum and manganese metals in the inflow and outflow were measured. In the clarified effluent the pH and turbidity were also measured. Data were recorded for a satisfactory operation, with a significant impact on the reduction of costs in the transportation and deposition of the fine tailings and in the treatment of the clarified overflow, allowing the disposal according to the Environmental Legislation.
|
8 |
Development of a novel magnetic photocatalyst : preparation, characterisation and implication for organic degradation in aqueous systemsBeydoun, Donia, Chemical Engineering & Industrial Chemistry, UNSW January 2000 (has links)
Magnetic photocatalysts were synthesised by coating a magnetic core with a layer of photoactive titanium dioxide. This magnetic photocatalyst is for use in slurry-type reactors in which the catalyst can be easily recovered by the application of an external magnetic field. The first attempt at producing this magnetic photocatalyst involved the direct deposition of titanium dioxide onto the surface of magnetic iron oxide particles. The photoactivity of these Fe3O4/TiO2 was lower than that of single-phase TiO2 and was found to decrease with an increase in the heat treatment. These observations were explained in terms of an unfavourable heterojunction between the titanium dioxide and the iron oxide core. Fe ion diffusion from the iron oxide core into the titanium dioxide matrix upon heat treatment, leading to a highly doped TiO2 lattice, was also contributing to the observed low activities of these samples. These Fe3O4/TiO2 particles were found to be unstable, with photodissolution of the iron oxide phase being encountered. This photodissolution was dependent on the heat treatment applied, the greater the extent of the heat treatment, the lower the incidence of photodissolution. This was explained in terms of the stability of the iron oxide phases present, as well as the lower photoactivity of the titanium dioxide matrix. In fact, the observed photodissolution was found to be induced-photodissolution. That is, the photogenerated electrons in the titanium dioxide phase were being injected into the lower lying conduction band of the iron oxide core, leading to its reduction and then dissolution. Thus, the approach of directly depositing TiO2 onto the surface of a magnetic iron oxide core proved ineffective in producing a stable magnetic photocatalyst. The introduction of an intermediate passive SiO2 layer between the titanium dioxide phase and the iron oxide phase inhibited the direct electrical contact and hence prevented the photodissolution of the iron oxide phase. Improvements in the photoactivity were seen to be due to the inhibition of both the electronic and chemical interactions between the iron oxide and titanium dioxide phases. Preliminary optimisation experiments revealed that a thin SiO2 layer is sufficient for inhibiting the photodissolution. The thickness of the TiO2 coating was found not to have a significant effect on the photocatalytic performance of the coated particles. Finally, heat treating for 20 minutes at 450??C was sufficient for converting the titanium dioxide into a photoactive phase, longer heating times had no beneficial effect on the photoactivity.
|
9 |
Design of conical centrifugal filters : an analytical approachBizard, Arnaud François Marie January 2011 (has links)
No description available.
|
10 |
Development of a novel magnetic photocatalyst : preparation, characterisation and implication for organic degradation in aqueous systemsBeydoun, Donia, Chemical Engineering & Industrial Chemistry, UNSW January 2000 (has links)
Magnetic photocatalysts were synthesised by coating a magnetic core with a layer of photoactive titanium dioxide. This magnetic photocatalyst is for use in slurry-type reactors in which the catalyst can be easily recovered by the application of an external magnetic field. The first attempt at producing this magnetic photocatalyst involved the direct deposition of titanium dioxide onto the surface of magnetic iron oxide particles. The photoactivity of these Fe3O4/TiO2 was lower than that of single-phase TiO2 and was found to decrease with an increase in the heat treatment. These observations were explained in terms of an unfavourable heterojunction between the titanium dioxide and the iron oxide core. Fe ion diffusion from the iron oxide core into the titanium dioxide matrix upon heat treatment, leading to a highly doped TiO2 lattice, was also contributing to the observed low activities of these samples. These Fe3O4/TiO2 particles were found to be unstable, with photodissolution of the iron oxide phase being encountered. This photodissolution was dependent on the heat treatment applied, the greater the extent of the heat treatment, the lower the incidence of photodissolution. This was explained in terms of the stability of the iron oxide phases present, as well as the lower photoactivity of the titanium dioxide matrix. In fact, the observed photodissolution was found to be induced-photodissolution. That is, the photogenerated electrons in the titanium dioxide phase were being injected into the lower lying conduction band of the iron oxide core, leading to its reduction and then dissolution. Thus, the approach of directly depositing TiO2 onto the surface of a magnetic iron oxide core proved ineffective in producing a stable magnetic photocatalyst. The introduction of an intermediate passive SiO2 layer between the titanium dioxide phase and the iron oxide phase inhibited the direct electrical contact and hence prevented the photodissolution of the iron oxide phase. Improvements in the photoactivity were seen to be due to the inhibition of both the electronic and chemical interactions between the iron oxide and titanium dioxide phases. Preliminary optimisation experiments revealed that a thin SiO2 layer is sufficient for inhibiting the photodissolution. The thickness of the TiO2 coating was found not to have a significant effect on the photocatalytic performance of the coated particles. Finally, heat treating for 20 minutes at 450??C was sufficient for converting the titanium dioxide into a photoactive phase, longer heating times had no beneficial effect on the photoactivity.
|
Page generated in 0.1483 seconds