Spatial Modulation (SM) is a spatial multiplexing technique designed for MIMO systems where only one transmit antenna is used at each time. It is considered to be an attractive choice for future wireless communication systems as it reduces Inter Channel Interference (ICI) while maintaining high energy efficiency. It can achieve this goal by mapping block of data bits into constellation points in the spatial and signal domain. Combining this innovative method with multiple access techniques could improve the system performance and enhance the data rate. In Code Division Multiple Access (CDMA) method employing parity bit permutation spreading, the bit error rate (BER) performance could be improved by using the parity bits to select the spreading sequence to use at each signalling interval. In this thesis, a new system model based on SM and CDMA employing parity bit permutation spreading is proposed and investigated. The proposed system takes advantage of the benefits of both techniques. In this system, in addition to use the parity bits to select the spreading sequences, same concept is used to select the combination of antennas to activate at each time instant. By doing so, a reduction of power consumption, Inter-Channel and Inter Symbol Interference effect can be achieved while keeping a certain diversity order compared to SM. Multiuser scenario is also discussed in order to investigate the multiple access interference (MAI) effects in synchronous transmission. In such case, the receiver estimates the desired user's information by considering the other users' signal as additional noise. Simulation results of the proposed MIMO-CDMA system employing permutation spreading show, for single user and multiuser, a significant improvement of the BER performance in low signal to noise ratio (SNR) when SM is implemented.

The spatial modulation (SM) concept combines, in a novel fashion, digital modulation and multiple antenna transmission for low complexity and spectrally efficient data transmission. The idea considers the transmit antenna array as a spatial constellation diagram with the transmit antennas as the constellation points. To this extent, SM maps a sequence of bits onto a signal constellation point and onto a spatial constellation point. The information is conveyed by detecting the transmitting antenna (the spatial constellation point) in addition to the signal constellation point. In this manner, inter-channel interference is avoided entirely since transmission is restricted to a single antenna at any transmission instance. However, encoding binary information in the spatial domain means that the number of transmit antennas must be a power of two. To address this constraint, fractional bit encoded spatial modulation (FBE—SM) is proposed. FBE–SMuses the theory of modulus conversion to facilitate fractional bit rates over time. In particular, it allows each transmitter to use an arbitrary number of transmit antennas. Furthermore, the application of SM in a multi-user, interference limited scenario has never been considered. To this extent, the average bit error rate (ABER) of SM is characterised in the interference limited scenario. The ABER performance is first analysed for the interference-unaware detector. An interference-aware detector is then proposed and compared with the cost and complexity equivalent detector for a single–input multiple–output (SIMO) system. The application of SM with an interference-aware detector results in coding gains for the system. Another area of interest involves using SM for relaying systems. The aptitude of SM to replace or supplement traditional relaying networks is analysed and its performance is compared with present solutions. The application of SM to a fixed relaying system, termed dual-hop spatial modulation (Dh-SM), is shown to have an advantage in terms of the source to destination ABER when compared to the classical decode and forward (DF) relaying scheme. In addition, the application of SM to a relaying system employing distributed relaying nodes is considered and its performance relative to Dh-SM is presented. While significant theoretical work has been done in analysing the performance of SM, the implementation of SM in a practical system has never been shown. In this thesis, the performance evaluation of SM in a practical testbed scenario is presented for the first time. To this extent, the empirical results validate the theoretical work presented in the literature.

ITC/USA 2015 Conference Proceedings / The Fifty-First Annual International Telemetering Conference and Technical Exhibition / October 26-29, 2015 / Bally's Hotel & Convention Center, Las Vegas, NV / Spatial modulation (SM) reduces transceiver complexity and inter-channel interference over traditional multiple input multiple output (MIMO) systems. It has been shown recently in the literature that the use of a precoder in an SM or a generalized spatial modulation (GSM) system can significantly improve error performance. This paper investigates two issues related to precoders: 1) the use of a precoder in Alamouti-GSM systems, and 2) the effects of power constraints on the precoder design. The results in this paper show that Alamouti-GSM can improve system performance by several dB. On power constraint issues, the paper shows that there is a trade-off between limiting antenna power fluctuations and the potential gain due to precoders.

L'Internet des objets est l'un des concepts clefs stimulant l'évolution des réseaux mobiles dans le but de leur donner de nouvelles fonctionnalités de communication et de gestion d'objets dits connectés. Comparativement aux terminaux mobiles standards, les usages associés à ces objets connectés sont en général caractérisés par des débits modestes et de faibles ressources en capacité de calcul et en énergie. Les techniques de modulation spatiale (SM) sont proposées comme une solution prometteuse pour assurer les débits des objets connectés tout en maîtrisant le critère de la consommation énergétique. L'objectif de cette thèse est d'étudier les performances de différents schémas de transmission basés sur le concept SM mis en oeuvre en transmission ou en réception. Nous avons notamment proposé un système global de communication en liaisons montante (SM en transmission) et descendante (SM en réception) entre une station de base et un objet, dans lequel l'essentiel de la complexité de calcul est concentré à la station de base. Par ce système, une liaison avec un objet peut être établie en limitant les traitements au sein de l'objet à di simples fonctions d'activation/désactivation d'antenne et de détection à seuil. Par ailleurs, nous avons proposé des schémas SM étendus grâce auxquels l'efficacité spectrale atteignable devient égale au nombre d'antennes au sein de l'objet. Les expressions analytiques de la probabilité d'erreur binaire ont été développées pour l'ensemble des systèmes étudiés en utilisant différentes méthodes de détection. L'impact de la connaissance imparfaite de l'état des canaux de propagation ainsi que l'effet des corrélations entre antennes ont également été incorporés dans l'étude des performances des schémas SM de réception. Dans une dernière partie, nous avons proposé d'adapter les schémas SM de réception dans un environnement de propagation en ondes millimétriques en utilisant une formation de faisceau hybride analogique/numérique au niveau de l'émetteur. / Internet of Things is one of the keyword that represents the evolution in 5G that is able to connect the so-called Connected Devices (CD) to the network. These CDs are expected to require modest data rates and will be characterized by low resources in terms of both computation and energy consumption compared to other mobile multi-media devices. Spatial Modulation (SM) is proposed to be a promising solution to boost the data rate of the CD with a small ( or no) increase in energy consumption. Inspired by the advantages of SM, the objective of this thesis is to study the performance of different transmission scheme based on the SM concept at the transmitter and at tht receiver, for respectively an uplink and a downlink transmission between a BS and a CD. We proposed a global system where the higher computational complexity remains at the BS: The transmit SM is used for uplink, and the receive SM for downlink. It is shown that with SM, an ON­OFF keying for uplink and Single Tap detector for downlink could be sufficient for the transmission a the CD. Also, with Extended SM schemes, we increased the spectral efficiency of SM to be equal t< the number of antennas of CD in both uplink and downlink transmission. A framework for the derivation of the Bit Error Probability (BEP) is developed for all schemes with different detection methods. Impact of imperfect CSIT transmission has been studied when linear precoding is implemented for the receive spatial modulation, as well as the effect of antenna correlations. Finally we proposed to adapte the spatial modulation at the receiver with the mmWave environment, using hybrid beamformina at the transmitter.

ITC/USA 2014 Conference Proceedings / The Fiftieth Annual International Telemetering Conference and Technical Exhibition / October 20-23, 2014 / Town and Country Resort & Convention Center, San Diego, CA / Spatial modulation (SM) is a transmission scheme where only one transmit antenna is active at any time instant. It thus reduces interchannel interference (ICI) and receiver complexity over traditional multi-antenna systems. However, the spectral efficiency of SM is low. To improve the spectral efficiency, generalized spatial modulation (GSM) can be used. In this paper, we propose to apply the Alamouti technique with GSM for correlated antennas, and show that the proposed approach provides significant improvement over conventional SM and GSM. Our study also shows the importance of bit-to-antenna mappings and their roles on the selection of appropriate correlated antennas.

This thesis introduces performance analysis on the effect of using orthogonal polyphase spreading sequences in the uplink scenario of Code Division Multiple Access (CDMA) systems, with the use of two novel dynamic code allocation algorithms to exploit the cross-correlation properties of the spreading sequences. The analysis is also extended to the cooperative communication world, where a cooperative uplink technique is presented that builds on the results and conclusions achieved in the conventional uplink scenario. Theoretical analysis and simulation results are given to highlight the performance gains achieved using the proposed techniques. As Multiple-Input Multiple-Output (MIMO) systems have been increasingly studied and researched in the recent literature to accommodate for the high demand of current and future generations of wireless communications, this thesis follows the same pattern and investigates a new MIMO transmission technique, namely, Spatial Modulation. The thesis then proposes new novel Spatial Modulation enhancement techniques that focus on utilising more of the available system resources for further performance improvements.

Spatial modulation (SM) is a transmission technique proposed for multiple–input multiple– output (MIMO) systems, where only one transmit antenna is active at a time, offering an increase in the spectral efficiency equal to the base–two logarithm of the number of transmit antennas. The activation of only one antenna at each time instance enhances the average bit error ratio (ABER) as inter–channel interference (ICI) is avoided, and reduces hardware complexity, algorithmic complexity and power consumption. Thus, SM is an ideal candidate for large scale MIMO (tens and hundreds of antennas). The analytical ABER performance of SM is studied and different frameworks are proposed in other works. However, these frameworks have various limitations. Therefore, a closed–form analytical bound for the ABER performance of SM over correlated and uncorrelated, Rayleigh, Rician and Nakagami–m channels is proposed in this work. Furthermore, in spite of the low–complexity implementation of SM, there is still potential for further reductions, by limiting the number of possible combinations by exploiting the sphere decoder (SD) principle. However, existing SD algorithms do not consider the basic and fundamental principle of SM, that at any given time, only one antenna is active. Therefore, two modified SD algorithms tailored to SM are proposed. It is shown that the proposed sphere decoder algorithms offer an optimal performance, with a significant reduction of the computational complexity. Finally, the logarithmic increase in spectral efficiency offered by SM and the requirement that the number of antennas must be a power of two would require a large number of antennas. To overcome this limitation, two new MIMO modulation systems generalised spatial modulation (GNSM) and variable generalised spatial modulation (VGSM) are proposed, where the same symbol is transmitted simultaneously from more than one transmit antenna at a time. Transmitting the same data symbol from more than one antenna reduces the number of transmit antennas needed and retains the key advantages of SM. In initial development simple channel models can be used, however, as the system develops it should be tested on more realistic channels, which include the interactions between the environment and antennas. Therefore, a full analysis of the ABER performance of SM over urban channel measurements is carried out. The results using the urban measured channels confirm the theoretical work done in the field of SM. Finally, for the first time, the performance of SM is tested in a practical testbed, whereby the SM principle is validated.

Nowadays, several studies are launched for the design of reliable and safe communications systems that introduce Unmanned Aerial Vehicle (UAV), this paves the way for UAV communication systems to play an important role in a lot of applications for non-segregated military and civil airspaces. Until today, rules for integrating commercial UAVs in airspace still need to be defined, the design of secure, highly reliable and cost effective communications systems still a challenging task. This thesis is part of this communication context. Motivated by the rapid growth of UAV quantities and by the new generations of UAVs controlled by satellite, the thesis aims to study the various possible UAV links which connect UAV/aircraft to other communication system components (satellite, terrestrial networks, etc.). Three main links are considered: the Forward link, the Return link and the Mission link. Due to spectrum scarcity and higher concentration in aircraft density, spectral efficiency becomes a crucial parameter for largescale deployment of UAVs. In order to set up a spectrally efficient UAV communication system, a good understanding of transmission channel for each link is indispensable, as well as a judicious choice of the waveform. This thesis begins to study propagation channels for each link: a mutipath channels through radio Line-of-Sight (LOS) links, in a context of using Meduim Altitude Long drones Endurance (MALE) UAVs. The objective of this thesis is to maximize the solutions and the algorithms used for signal reception such as channel estimation and channel equalization. These algorithms will be used to estimate and to equalize the existing muti-path propagation channels. Furthermore, the proposed methods depend on the choosen waveform. Because of the presence of satellite link, in this thesis, we consider two low-papr linear waveforms: classical Single-Carrier (SC) waveform and Extented Weighted Single-Carrier Orthogonal Frequency-Division Multiplexing (EW-SC-OFDM) waveform. channel estimation and channel equalization are performed in the time-domain (SC) or in the frequency-domain (EW-SC-OFDM). UAV architecture envisages the implantation of two antennas placed at wings. These two antennas can be used to increase diversity gain (channel matrix gain). In order to reduce channel equalization complexity, the EWSC- OFDM waveform is proposed and studied in a muti-antennas context, also for the purpose of enhancing UAV endurance and also increasing spectral efficiency, a new modulation technique is considered: Spatial Modulation (SM). In SM, transmit antennas are activated in an alternating manner. The use of EW-SC-OFDM waveform combined to SM technique allows us to propose new modified structures which exploit exces bandwidth to improve antenna bit protection and thus enhancing system performances.

Spatial Modulation (SM) is a Multiple-Input Multiple-Output (MIMO) transmission technique which realizes low complexity implementations in wireless communication systems. Due the transmission principle of SM, only one Radio Frequency (RF) chain is required in the transmitter. Therefore, the complexity of the transmitter is lower compared to the complexity of traditional MIMO schemes, such as Spatial MultipleXing (SMX). In addition, because of the single RF chain configuration of SM, only one Power Amplifier (PA) is required in the transmitter. Hence, SM has the potential to exhibit significant Energy Efficiency (EE) benefits. At the receiver side, due to the SM transmission mechanism, detection is conducted using a low complexity (single stream) Maximum Likelihood (ML) detector. However, despite the use of a single stream detector, SM achieves a multiplexing gain. A point-to-point closed-loop variant of SM is receive space modulation. In receive space modulation, the concept of SMis extended at the receiver side, using linear precoding with Channel State Information at the Transmitter (CSIT). Even though receive space modulation does not preserve the single RF chain configuration of SM, due to the deployed linear precoding, it can be efficiently incorporated in a Space Division Multiple Access (SDMA) or in a Virtual Multiple-Input Multiple-Output (VMIMO) architecture. Inspired by the potentials of SM, the objectives of this thesis are the evaluation of the EE of SM and its extension in different forms of MIMO communication. In particular, a realistic power model for the power consumption of a Base Station (BS) is deployed in order to assess the EE of SM in terms of Mbps/J. By taking into account the whole power supply of a BS and considering a Time Division Multiple Access (TDMA) multiple access scheme, it is shown that SM is significantly more energy efficient compared to the traditional MIMO techniques. In the considered system setup, it is shown that SM is up to 67% more energy efficient compared to the benchmark systems. In addition, the concept of space modulation is researched at the receiver side. Specifically, based on the union bound technique, a framework for the evaluation of the Average Bit Error Probability (ABEP), diversity order, and coding gain of receive space modulation is developed. Because receive space modulation deploys linear precoding with CSIT, two new precoding methods which utilize imperfect CSIT are proposed. Furthermore, in this thesis, receive space modulation is incorporated in the broadcast channel. The derivation of the theoretical ABEP, diversity order, and coding gain of the new broadcast scheme is provided. It is concluded that receive space modulation is able to outperform the corresponding traditional MIMO scheme. Finally, SM, receive space modulation, and relaying are combined in order to form a novel virtual MIMO architecture. It is shown that the new architecture practically eliminates or reduces the problem of the inefficient relaying of the uncoordinated virtual MIMO space modulation architectures. This is undertaken by using precoding in a novel fashion. The evaluation of the new architecture is conducted using simulation and theoretical results.

Yes / Multiple-input multiple-output (MIMO) systems require simplified architectures that can maximize design parameters without sacrificing system performance. Such architectures may be used in a transmitter or a receiver. The most recent example with possible low cost architecture in the transmitter is spatial modulation (SM). In this study, we evaluate the SM and quasi-orthogonal space time block codes (QOSTBC) schemes for MIMO systems over a Rayleigh fading channel. QOSTBC enables STBC to be used in a four antenna design, for example. Standard QO-STBC techniques are limited in performance due to self-interference terms; here a QOSTBC scheme that eliminates these terms in its decoding matrix is explored. In addition, while most QOSTBC studies mainly explore performance improvements with different code structures, here we have implemented receiver diversity using maximal ratio combining (MRC). Results show that QOSTBC delivers better performance, at spectral efficiency comparable with SM.