1 |
Relationships between Visual Field Sensitivity and Spectral Absorption Properties of the Neuroretinal Rim in Glaucoma by Multispectral ImagingDenniss, Jonathan, Schiessl, I., Nourrit, V., Fenerty, C.H., Gautam, R., Henson, D.B. 07 November 2011 (has links)
No / To investigate the relationship between neuroretinal rim (NRR) differential light absorption (DLA, a measure of spectral absorption properties) and visual field (VF) sensitivity in primary open-angle glaucoma (POAG).
atients diagnosed with (n = 22) or suspected of having (n = 7) POAG were imaged with a multispectral system incorporating a modified digital fundus camera, 250-W tungsten-halogen lamp, and fast-tuneable liquid crystal filter. Five images were captured sequentially within 1.0 second at wavelengths selected according to absorption properties of hemoglobin (range, 570–610 nm), and a Beer-Lambert law model was used to produce DLA maps of residual NRR from the images. Patients also underwent VF testing. Differences in NRR DLA in vertically opposing 180° and 45° sectors either side of the horizontal midline were compared with corresponding differences in VF sensitivity on both decibel and linear scales by Spearman's rank correlation.
The decibel VF sensitivity scale showed significant relationships between superior–inferior NRR DLA difference and sensitivity differences between corresponding VF areas in 180° NRR sectors (Spearman ρ = 0.68; P < 0.0001), superior-/inferior-temporal 45° NRR sectors (ρ = 0.57; P < 0.002), and superior-/inferior-nasal 45° NRR sectors (ρ = 0.59; P < 0.001). Using the linear VF sensitivity scale significant relationships were found for 180° NRR sectors (ρ = 0.62; P < 0.0002) and superior–inferior–nasal 45° NRR sectors (ρ = 0.53; P < 0.002). No significant difference was found between correlations using the linear or decibel VF sensitivity scales.
Residual NRR DLA is related to VF sensitivity in POAG. Multispectral imaging may provide clinically important information for the assessment and management of POAG. / College of Optometrists (UK) PhD Studentship (JD), Central Manchester NHS Foundation Trust Grant RO1180, the Manchester Academic Health Sciences Centre (MAHSC), and the NIHR Manchester Biomedical Research Centre.
|
2 |
Active Thermography for Additive Manufacturing ProcessesWallace, Nicholas Jay 06 August 2021 (has links)
The goal of the research conducted for this master's thesis is to understand if active thermography is a suitable technique to detect (identify) and measure (approximate depth and or size) defects in additive manufacturing (AM) processes. Although other non-destructive measurement techniques exist, active thermography is an attractive option for AM applications because of the short measurement times that could be implemented between each layer of a print, and because of the relatively inexpensive equipment required. However, pulse thermography is typically applied to detect larger defects (>1 mm) in materials with high thermal conductivity. It was uncertain if active thermography was sensitive enough to detect the small defects (μm) commonly introduced during AM. Defects of this size are common in AM, and their presence significantly impacts the mechanical properties of the final part. For this reason, the detection limits of active thermography in common AM materials were investigated. Numerical models were created to simulate the heat transfer during active thermography in AM structures (polymer and stainless steel) with defects of varying size. The models included non-ideal conditions such as spectral in-depth absorption of the irradiative pulse and free convection from the object's surface. The spectral properties of acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), and polyamide 12 (PA 12) were measured (see chapter 2) and used in the numerical models. The numerical data indicates that active thermography is sensitive enough to detect the existence of defects smaller than 100 μm in AM materials (see chapter 3). Furthermore, it demonstrates that the defect aspect ratio (defect diameter divided by defect depth) for which traditional 1D thermography models may be used to approximate the depth of defects in 3D systems is approximately 6 (see chapter 4). In addition, the depth of defects with lower aspect ratios (~4) may also be approximated with relatively low error (~10% error). Non-ideal systems (those with convection and spectral in-depth absorption) were simulated, and figures are provided which facilitate the approximation of defect depth using simple, ideal thermography models. Active thermography has shown potential as being an efficient technique for detecting and measuring small defects common in AM.
|
Page generated in 0.0665 seconds