<p>U radu su definisani najznačajniji ekspirementalni faktori hronopotenciometrijske striping analize žive na staklastom ugljeniku. Poređeni su različiti elektrohemijski sistemi. Ispitani sistemi su obuhvatili klasičnu elektrohemijsku ćeliju sa stacionarnom disk elektrodom, sistem sa rotirajućom disk elektrodom, procesnu posudu od staklastog ugljenika kao radnuelektrodu i protočne sisteme uz tankoslojnu i tubularnu ćeliju.</p><p>Tačnost definisanih metoda je potvrđena analizom standardnog referentnog materijala - lista paradajza. Najveća osetljivost određivanja žive je postignuta primenom procesne ča&scaron;e od staklastog ugljenika kao radne elektrode. Granica detekcije je iznosila 0,10ng/dm^3&nbsp;žive(II). Razvijene metode su primenjene za određivanje žive u vodama. Uzorci voda su obuhvatili vode za piće, morske, rečne, bunarske, jezerske i otpadne vode.</p> / <p>In this work optimal experimental conditions of chronopotentiometric stripping analysis of mercury using glassy carbon were investigated. Critical review of different electrochemical systems is given. Conventional electrochemical cell with stationary disc electrode, cell with rotating disc elektrode, system with process vessel as a working electrode and flow systems with thin-layer and tubular cell were encompassed by the investigation.</p><p>Accuracy of the particular techniques was confirmed by analysing standard reference material - tomato leaves. Best sensitivity was achieved using process vessel of glassy carbon as a working electrode - 0,1 ng/d³. The developed methods were used for water analysis. Mercury was determined in samples of tap, well, seawater, river, lake, rain waters and in one sample of waste water.</p>

<p>U okviru ove doktorske disertacije, razvijene su elektroanalitičke metode za određivanje odabranih pesticida primenom hronopotenciometrije. Ispitana je mogućnost primene elektrode od staklastog ugljenika i tankoslojne živine elektrode kao radnih elektroda za određivanje insekticida imidakloprida i herbicida metamitrona i metribuzina. U cilju optimizacije uslova hronopotenciometrijske tehnike, za svaki ispitivani sistem (pesticid/radna elektroda) ispitan je uticaj najznačajnijih eksperimentalnih parametara na analitički signal pesticida, uključujući mehanizam generisanja analitičkog signala na radnoj elektrodi (oksidacija/redukcija), optimalnu metodu za uklanjanje rastvorenog kiseonika iz analiziranog rastvora, kao i vrstu, pH i koncentraciju pomoćnog elektrolita. Nakon toga definisan je optimalni opseg potencijala i struje redukcije. Pored toga, u okviru validacije metode za svaki ispitivani sistem, ispitan je i definisan opseg linearnosti, određena granica detekcije i granica kvantifikacije, ispitana preciznost, tačnost, robusnost i selektivnost metode. Dobijeni analitički signal za ispitivane pesticide bio je posledica ireverzibilne redukcije analita na radnoj elektrodi, a za svaki analit dobijen je jedan redukcioni pik. U slučaju određivanja metribuzina eksperimenti su pokazali da se analitički signal ne može detektovati na elektrodi od staklastog ugljenika uz kori&scaron;ćenje dostupne instrumentacije. Ispitivanja u model-rastvorima za svaki ispitivani sistem pokazala su dobre karakteristike u pogledu preciznosti, tačnosti, selektivnosti i robusnosti metode. Najveća osetljivost za sva tri pesticida postignuta je uz primenu tankoslojne živine elektrode, a vrednosti granice detekcije iznosile su 0,17 mg/l za imidakloprid, 0,07 mg/l za metamitron i 0,04 mg/l za metribuzin. Nakon optimizacije i validacije, razvijene hronopotenciometrijske metode primenjene su na komercijalne formulacije pesticida i uzorke vode. U cilju dodatne potvrde hronopotenciometrijskih rezultata na uzorcima vode izvedena su komparativna merenja uz primenu hromatografske LC-MS/MS analize.</p> / <p>Within this doctoral dissertation, electroanalytical methods for the determination of selected pesticides using chronopotentiometry are developed. The possibility of using glassy carbon electrode and thin film mercury electrode as a working electrode for determination of insecticide imidacloprid and herbicides metamitron and metribuzin is investigated. In order to optimize the conditions of the chronopotentiometric technique for each tested system (pesticide/working electrode), the influence of the most important experimental parameters on the analytical signal of the pesticides is investigated, including the generating mechanism of the analytical signal on the working electrode (oxidation/reduction), the optimal method for removal of dissolved oxygen from the analyzed solution, as well as type, pH, and concentration of the supporting electrolyte. Afterwards, the optimal range of potential and reduction current is defined. Additionally, within the validation of the method for each tested system, the linearity range is determined and defined, limit of detection and quantification are determined, and precision, accuracy, robustness and selectivity of the method are tested. The obtained analytical signal for the investigated pesticides is the result of irreversible reduction of the analyte on the working electrode, and for each analyte one reduction peak is obtained. In the case of metribuzin determination, the experiments have shown that by using the available instrumentation the analytical signal can not be detected on the glassy carbon electrode. Investigation in model solutions for each tested system shows good characteristics in terms of precision, accuracy, selectivity and robustness of the method. The highest sensitivity for all three pesticides was achieved by using thin film mercury electrode, and values of detection limit were 0.17 mg/l for imidacloprid, 0.07 mg/l for metamitron and 0.04 mg/l for metribuzin. After optimization and validation, the developed chronopotentiometric methods are applied to commercial pesticide formulations and water samples. In order to further confirm the chronopotentiometric results on the water samples, comparative measurements are performed using chromatographic LC-MS/MS analysis.</p>

<p>Danas, u raznim analitičkim laboratorijama postoji veći broj analitičkih protokola,<br />zasnovanih bilo na izuzetno sofisticiranim ili jednostavnijim tehnikama, koji služe za<br />određivanje različitih ciljnih analita od farmakolo&scaron;kog značaja. Među tim grupama ciljnih analita pripadaju i antibiotici koji predstavljaju veliko otkriće u oblasti medicine i zahvaljujući njima spa&scaron;eno je vi&scaron;e od sedam miliona života, ali pored navedenih koristi, antibiotici mogu da izazovu&nbsp; veliki broj neželjenih efekata i žučne kiseline zajedno sa svojim derivatima, koji su fiziolo&scaron;ki deterdženti, mogu biti citotoksične za organizam ako se njihova koncentracija ne kontroli&scaron;e. U ovoj doktorskoj disertaciji prikazan je razvoj analitičkih metoda pre svega voltametrijskihmetoda u kombinaciji sa jednostavnim i savremenim elektrodama/senzorima za određivanje&nbsp; odabranih analita kao &scaron;to je antraciklični antibiotik doksorubicin (DOX), makrolidni antibiotici<br />eritromicin-etilsukcinata (EES), azitromicina (AZI), klaritromicina (CLA) i roksitromicina&nbsp; (ROX) i 3-dehidro-deoksiholne kiseline.</p><p>Voltametrijska karakterizacija i određivanje gore navedenih antibiotika primenom obnovljive srebro-amalgam film elektrode (Hg(Ag)FE)rađena je direktnom katodnom&nbsp; voltametrijom sa pravougaonim talasima (SWV) i visoko osetljivom adsorptivnom voltametrijom sa pravougaonim talasima (SW-AdSV) u Briton-Robinson puferu, kao pomoćnom elektrolitu, obuhvatajući &scaron;irok opseg pH vrednosti. Odgovor DOX-a primenom&nbsp; Hg(Ag)FE&nbsp;praćen je u intervalu potencijala od -0,20 do -0,80 V.&nbsp; Za analizu tragova, optimizacija metode ukazuje da su optimalni parametri za analitički pik na potencijalu (Ep ) -0,57 V u odnosu na zasićenu kalomelovu elektrodu (ZKE): pH 6,0, potencijal&nbsp; akumulacije -0,20 V i vreme&nbsp; akumulacije 140 s. U model rastvoru, DOX je određivan u koncentracionom opsegu 4,99-59,64&nbsp; ng mL^-1. Razvijena SW-AdSV metoda je primenjena za određivanje DOX-a u obogaćenom uzorku humanog urina. Niža koncentracija DOX-a 9,89ng mL^-1&nbsp;u voltametrijskoj&nbsp; ćeliji je određivana sa relativnom standardnom devijacijom (RSD) manjom od 6,0%. &Scaron;to se ispitivanih makrolida tiče oni su pokazali redukcione signale u dalekoj negativnoj oblasti potencijala. Ispitivanja direktnom katodnom SWV rađena su u opsegu potencijala od -0,75 V do -2,00 V u odnosu na ZKE, pri čemu su dobijena jedan ili dva redukciona pika u opsegu potencijala od -1,5 V do -1,9 V. Oblik i intenzitet signala zavisi od primenjene pH vrednosti u &scaron;irokoj pH oblasti. Za analitičke svrhe, radi razvoja direktne katodne SWV i adsorptivne inverzne/striping SWV metode, pogodnim su se pokazale neutralna i slabo alkalna sredina tj. pH 7,0 sa&nbsp; E_p na -1,67 V u odnosu na ZKE za ROX i EES i pH 7,2 sa E_p na -1,85 V u odnosu na ZKE za AZI i pH 7,4 sa E_p na -1,64 V u odnosu na ZKE za CLA. Na osnovu snimljenih cikličnih voltamograma na&nbsp; optimalnim pH vrednostima, može se predložiti adsorptivno-kontrolisan kinetički proces na elektrodi u slučaju sva&nbsp; četiri ispitivana jedinjenja. Takođe,&nbsp; ¹H NMR merenja uz potiskivanje&nbsp; signala vode u pH oblasti između pH 6,0 i 10,5 ukazuju na to da su makrolidni molekuli pri optimalnim analitičkim uslovima predominantno u protonovanoj formi preko tercijerne amino grupe &scaron;to potpomaže, u sva&nbsp; četiri slučaja, njihovu adsorpciju na odgovarajuće polarizovanoj Hg(Ag)FE. Optimizovane direktne katodne SWV metode&nbsp; pokazuju dobru linearnost u koncentracionom opsegu 4,81-23,3&nbsp; &micro;g mL^-1 , 4,53-29,8&nbsp; &micro;g mL^-1 , 1,96-28,6&nbsp; &micro;g mL^-1 i 1,48-25,9 &micro;g mL^-1 za AZI, EES, CLA odnosno ROX. Razvijene SW-AdSV metode rezultiraju u linearnom odgovoru pri nižim koncentracionim intervalima 1,0-2,46 &micro;g mL^-1 ,&nbsp; 0,69-2,44&nbsp; &micro;g mL^-1, 0,05-0,99 &micro;g mL^-1 i 0,10-0,99&nbsp; &micro;g mL^-1 , za AZI, EES, CLA i ROX. RSD za sve razvijene metode nije veća od 1,5% izuzev SWV metode u slučaju AZI-a gde je 4,5%. Direktna katodna SWV metoda&nbsp; je uspe&scaron;no primenjena za određivanje EES-a u farmaceutskom proizvodu Eritromicin^&reg; dok SW-AdSV metoda je primenjena u slučaju određivanja EES-a u obogaćenom uzorku humanog urina i&nbsp;za određivanje ROX-a u farmaceutskom proizvodu Runac^&reg; . U svim pomenutim slučajevima, primenjena je metoda standardnog dodatka. Pouzdanost i tačnost elaboriranih procedura u slučaju određivanja EES-a u model sistemu i&nbsp; farmaceutskom proizvodu Eritromicin^&reg; su potvrđena poređenjem sa rezultatima dobijenim primenom HPLC-DAD metode.</p><p>Nakon preliminarnih studija 3-dehidro-deoksiholne&nbsp; kiseline/3-dehidro-deoksiholata primenom elektrode od staklastog ugljenika (GCE), gde je uočeno da ne dolazi do formiranja redukcionog signala u Briton-Robinson puferu između pH 5,0 i 11,8 primenom direktne katodne SWV, bizmut-film je izdvojen&nbsp; <em>ex situ</em> na povr&scaron;ini iste elektrode od staklastog ugljenika (BiF-GCE) iz uobičajeno kori&scaron;ćenog rastvora za elektrodepoziciju (0,02 mol L^-1 Bi(NO₃)₃, 1,0 mol L^-1 HCl i 0,5 mol L^-1 KBr) i tako pripremljena elektroda je primenjena za karakterizaciju i određivanje pomenutog jedinjenja u alkalnoj sredini. Redukcioni signal ispitivanog analita od analitičkog značaja je uočen jedino primenom BiF-GCE u Briton-Robinson puferusa pH vrednostima između 9,5 i 11,8 u režimu adsorptivne inverzne/stripingvoltametrije sa pravougaonim talasima, dok u slučaju direktnih katodnih SWV eksperimentalnih uslova uočen je slab redukcioni pik sa niskom strujom maksimuma pika. Optimizovani eksperimentalni uslovi za određivanje 3-dehidro-deoksiholata obuhvataju odgovarajuće kondicioniranje elektrode uključujući kondicioniranje&nbsp; <em>ex situ</em> pripremljene BiF-GCE u Briton-Robinson pomoćnom elektrolitu pH 11,8 do stabilizacije struje bazne linije elektrohemijskim cikliranjem potencijala radne elektrode u potencijalskom opsegu između -1,00 i -2,00 V u odnosu na ZKE (blizu 15 puta) i primenu dva ključna parametara adsorptivne voltametrije sa pravougaonim talasima: vreme akumulacije od 30 s i potencijal akumulacije&nbsp; -1,00 V u odnosu na ZKE. Zbog relativne asimetričnosti dobijenih redukcionih signala ispitivanog analita sa&nbsp; E_p na -1,35 V u odnosu na ZKE, &scaron;to je takođe prisutno i u slučaju primene SW-AdSV, određivanje ispitivanog analita je zasnovano na linearnoj zavisnosti između povr&scaron;ine pika redukcionog signala&nbsp; spitivanog analita i njegove odgovarajuće koncentracije i postignuta granica detekcije je 1,43 &micro;g mL^-1 sa dva linearna opsega kalibracione krive od 4,76 &micro;g mL^-1 do 13,0 &micro;g mL^-1 i od 13,0 &micro;g mL^-1 do 23,1 &micro;g mL^-1 za razvoj analitičke metode. RSD metode je 3,22%. Dodatni eksperimenti, elektroliza ispitivanog analita na potencijalu -1,55 V (blizu maksimuma pika ciljnog analita) u odnosu na ZKE su rađeni primenom GCE u obliku ploče (povr&scaron;ina 33,52 cm 2 ) modifikovane sa&nbsp; <em>ex situ&nbsp;</em>pripremljenim bizmut-filmom. Rastvor od interesa uzorkovan je na početku eksperimenta, nakon 2,5 h i nakon 4,5 h tretmana. Ovakvi uzorci su analizirani primenom ¹H NMR merenja uz potiskivanje signala vode u puferskom rastvoru pH 11,8. Može se pretpostaviti da tokom elektrolize 3-dehidro-deoksiholata dolazi do redukcije keto grupe prisutne u strukturi ispitivanog analita.</p><p>Na osnovu literaturnih podataka da neki od ciljnihmakrolidnih antibiotika kao &scaron;to je npr. azitromicin pokazuju oksidativno pona&scaron;anje na elektrodi od ugljenične paste i elektrodi od zlata deteljna karakterizacija i određivanje&nbsp; četiri makrolidna antibiotika rađena je primenom&nbsp; asične&nbsp;elektrode od ugljenične paste (CPE) koja se sastoji samo od grafitnog praha i parafinskog ulja sa optimizovanih direktnih anodnih SWV metoda. U slučaju EES-a i AZI-a diferencijalna pulsna voltametrija (DPV) je testirana za iste svrhe. Ključni&nbsp; parametar u slučaju razvoja analitičkih voltametrijskih metoda je odabir pH vrednosti pomoćnog elektrolita gde je oblik/simetričnost i intenzitet oskidacionog pika glavni kriterijum prilikom odabira. Kao odgovarajuće pH vrednosti za voltametrijsko određivanje EES-a primenom SWV metode odabrana je pH 8,0 sa E_p na 0,83<br />V u odnosu na ZKE, dok u slučaju DPV metode pH 12,0 sa&nbsp; E_p na 0,55 V u odnosu na ZKE je bila najpogodnija za analitičke svrhe. Za određivanje AZI-a, u slučaju obe SWV i DPV metode pH 7,0 se pokazala najpogodnijom sa E_p analitičkog signala na 0,85 V odnosno 0,80 V u odnosu na ZKE, dok u slučaju CLA i ROX koji su ispitivani samo primenom SWV metode za analitičke svrhe pH 12,0 je bila najpogodnija sredina sa E_p analitičkog signala na 0,65 V odnosno na 0,63 V&nbsp;u odnosu na ZKE. Postignute granice detkcije primenom nemodifikovane CPE i direktne anodne SWV su uglavnom u submikrogramskom koncentracionom opsegu 0,17 &micro;g mL^-1 , 0,32&nbsp; &micro;g mL^-1 i 0,30&nbsp; &micro;g mL^-1, u slučaju EES-a, AZI-a i ROX-a i u niskom mikrogramskom koncentracionom opsegu 1,43&nbsp; &micro;g mL^-1 za CLA. Razvijena SWV metoda sa jednostavnom CPE pokazala se pogodnom za određivanje ROX-a u komercijalnom proizvodu Runac^&reg; tableti. U slučaju optimizovanih DPV metoda postignute granice detekcije za EES i AZI su u niskom mikrogramskom&nbsp; koncentracionom opsegu 1,03&nbsp; &micro;g mL^-1 odnosno 1,53&nbsp; &micro;g&nbsp; mL^-1 . U želji da se&nbsp;postigne niža granica detekcije za AZI, DPV metoda&nbsp; je testirana u kombinaciji sa&nbsp; CPE radnom elektrodom povr&scaron;inski modifikovanom sa zlatnim nanočesticama&nbsp; prečnika 10 nm (Au-CPE) i&nbsp; postignuta granica detekcije je 0,95&nbsp; &micro;g mL^-1 sa&nbsp; E_p analitičkog signala na 0,80 V u odnosu na&nbsp; ZKE. RSD metode u slučaju Au-CPE je 3,5%, dok je u slučaju nemodifikovane CPE 6,0%.&nbsp; Linearnost analitičke metode zasnovane na primeni Au-CPE je dva puta &scaron;ira nego u slučaju&nbsp; primene nemodifikovane CPE.</p><p>Na osnovu dobijenih rezultata može se zaključiti da&nbsp; odgovarajuće kombinacije&nbsp; optimizovanih voltametrijskih tehnika sa ekolo&scaron;ki prihvatljivim i lako primenljivim radnim&nbsp; elektrodama, kao &scaron;to su Hg(Ag)FE, BiF-GCE i CPE zajedno sa Au-CPE, rezultuju razvojem&nbsp; pouzdanih analitičkih metoda, kako u oksidacionim tako i u redukcionim proučavanjima, koje&nbsp; često omogućuju&nbsp; određivanje tragova analita od farmakolo&scaron;kog značaja u jednostavnim, a u&nbsp;nekim slučajevima i u složenim sistemima.&nbsp;</p> / <p>Nowadays in different analytical laboratories there is the increasing number of analytical protocols, either based on highly sophisticated or simpler measurements techniques, which serving for determination of different target analytes of pharmacological importance. Among such target groups of the analyte belongs the antibiotics which present a great discovery in the field of medicine and thanks to them were saved more than seven million people but beside to the mentioned great benefits, antibiotics can cause a large number of side effects and bile acids together with their derivatives which are physiological detergents but if their concentration is not<br />controlled they can be cytotoxic to the body. In the present doctoral dissertation the development of analytical methods, primarily analytical voltammetric methods in combination with simple and contemporary electrodes/sensors, for the determination of selected analytes as antracycline antibiotic doxorubicin (DOX), macrolide antibiotics erythromycin ethylsuccinate (EES), azithromycin (AZI), clarithromycin (CLA) and roxithromycin (ROX) and 3-dehydrodeoxycholic acid were performed.</p><p>Voltammetric characterization and determination of the above mentioned antibiotics using a renewable silver-amalgam film electrode (Hg(Ag)FE) was performed by direct cathodic square-wave voltammetry (SWV) and by highly sensitive adsorptive square-wave voltammetry (SW-AdSV) in aqueous Britton-Robinson buffer solutions as supporting electrolyte covering the wider pH range. The Hg(Ag)FE response of DOX was monitored in the potential range between -0.20 and -0.80 V. For the trace level analysis the method optimization showed that the optimal conditions for the analytical peak with peak potential (E_p) at -0.57 V vs. SCE were: the pH 6.0, the accumulation potential -0.20 V, and the accumulation time 140 s. In the model solutions, DOX was determined in the concentration range of 4.99-59.64 ng mL^-1. The developed SWAdSV method was applied for the determination of DOX in spiked human urine sample. The lowest concentration of DOX of 9.89 ng mL^-1 in voltammetric vessel was determined with the relative standard deviation (RSD) less than 6%. As for the investigated macrolides, they showed reduction signals in fairly negative potential range. During direct cathodic SWV investigations conducted over the potential range from -0.75 V to -2.00 V vs. SCE, either one or two reduction peaks were obtained in the&nbsp; potential range from -1.5 to -1.9 V. For analytical purposes concerning the development of direct cathodic SWV and adsorptive stripping SWV methods the neutral&nbsp; and slightly alkaline media were suitable as pH 7.0 with E_p at -1.67 V vs.&nbsp; SCE for ROX and EES and pH 7.2 and pH 7.4 with E_p at -1.85 V and -1.64 V vs. SCE for AZI and CLA, respectively. Based on the cyclic voltammograms recorded at these pH values, adsorptioncontrolled electrode kinetics process can be proposed for all four investigated compounds. The water suppressed ¹H NMR measurements in the pH range between 6.0 and 10.5 indicated that the macrolide molecules at the optimal analytical conditions are predominantly in protonated form via their tertiary amino groups which supported in all four cases their adsorption on the appropriately polarized Hg(Ag)FE electrode. The optimized direct cathodic SWV methods showed good linearity in concentration ranges 4.81-23.3 &mu;g mL^-1, 4.53-29.8 &mu;g mL^-1, 1.96-28.6&nbsp; &mu;g mL^-1, and 1.48-25.9 &mu;g mL^-1 for AZI, EES, CLA and ROX, respectively. The SW-AdSV methods resulted in the linear responses at lower concentration ranges as 1.0-2.46 &mu;g mL^-1, 0.69- 2.44 &mu;g mL^-1, 0.05-0.99 &mu;g mL^-1 and 0.10-0.99 &mu;g mL^-1, for AZI, EES, CLA and ROX, respectively. The RSD for all developed methods was not higher than 1.5% except the SWV method for AZI with 4.7%. The direct cathodic SWV method was successfully applied for the determination of EES in the pharmaceutical preparation Eritromicin^&reg;, while SW-AdSV was tested in the case of the spiked urine sample and for determination of ROX in pharmaceutical preparation Runac^&reg;. In all above cases, the standard addition method was used. The reliability and accuracy of the above procedures in the case of EES determination in model system and pharmaceutical preparation Eritromicin^&reg; were validated by comparing them with those obtained by means of HPLC-DAD measurements.</p><p>After initial study of 3-dehydro-deoxycholic acid/3-dehydro-deoxycholate by glassy carbon electrode, where the absence of any reduction peak was observed in the Britton-Robinson buffer solutions between pH 5.0 and 11.8 by direct cathodic SWV, a bismuth-film was electrodeposited ex situ on the same glassy carbon electrode surface (BiF-GCE) from the usually used plating solution (0.02 mol L^-1 Bi(NO₃)₃, 1.0 mol L^-1 HCl and 0.5 mol L^-1 KBr) and such prepared film-electrode was applied for the characterization and determination of the the target analyte in alkaline media. The reduction signal of analytical importance was observed only by BiF-GCE in Britton-Robinson buffer solutions with pH values between 9.5 and 11.8 in adsorptive stripping square-wave voltammetry working regime, while in the case of the direct cathodic SWV experimental protocol only a very poor reduction peak was obtained. The optimized experimental conditions for the 3-dehydro-deoxycholate determination consist of the optimized electrode conditioning including the electrochemical cycling of the <em>ex situ </em>prepared BiF-GCE potentials in the potential span between -1.0 and -2.0 V vs. SCE (nearly 15 times) in the Britton-Robinson supporting electrolyte pH 11.8 till the stabilization of the baseline current, and the application of two key parameters of the adsorptive square-wave voltammetric protocol: the accumulation time as 30 s and accumulation potential as -1.0 V vs. SCE. Because of the relative asymmetry of the obtained reduction signals of the target analyte with peak E_p at -1.35 V vs. SCE, which is still present in the case of the SW-AdSV, the quantification of the target analyte was based on the linear correlation between peak area of the reduction signal and its appropriate concentrations, and reached limit of detection is 1.43 &mu;g mL^-1 and with two linear ranges of calibration curve from 4,76 &mu;g mL^-1 to 13.0 &mu;g mL^-1 and from 13,0 &mu;g mL^-1 to 23,1 &mu;g mL^-1 for the development of analytical method. The RSD of the method&nbsp; was 3.22%. Additional experiments were performed applying GCE with rectangular form (area 35.32 cm²) modified with ex situ prepared bismuth-film for the electrolysis of the target analyte which was performed at the potential -1.55 V (nearly the peak maxima of the target analyte) vs. SCE. The solution of interest was sampled at the beginning of the experiment, after 2.5 h and after 4.5 h of treatment. Such samples were analysed by simply water suppressing ¹H NMR measurements in the buffered solution at pH 11.8. It can be assumed that during electrolysis of 3-dehydrodeoxycholate the reduction of the keto group present in the structure of the target analyte can be occurred.</p><p>Driven by earlier literature data about the fact that some of the target macrolide antibiotics as e.g. azithromycin showed oxidation behavior at a carbon paste and gold working electrodes detailed characterization and determination of four target macrolide antibiotics were performed on classical carbon paste electrode (CPE) constituted only from graphite powder and paraffin oil with optimized direct anodic SWV methods. In the cases of EES and AZI differential pulse voltammetric (DPV) methods were tested for the same purpose as well. The key parameter in the case of the development of the analytical voltammetric methods is the selection of the pH value of the supporting electrolyte where the shape/simmetry and intensity of the oxidation peak were the criteria. As the appropriate pH value for determination of EES by SWV method the pH 8.0 was selected with E_p at 0.83 V vs. SCE while in the case of the DPV method the pH 12.0 with E_p at 0.55 V vs. SCE was the most suitable for analytical&nbsp; purpose. As for AZI determination, in the case of both SWV and DPV methods the pH 7.0 was the most appropriate supporting electrolyte with the Ep of analytical signal at 0.85 V and 0.80 V vs. SCE, respectively, while in the case of CLA and ROX which were investigated only with SWV method for the analytical purposes the pH 12.0 was the most suitable with E_p at 0.65 V and at 0.63 V vs. SCE. The obtained detection limits applying the bare CPE and the direct anodic SWV are mainly&nbsp; in submicrogram concentration range as 0.17 &mu;g mL^-1; 0.32 &mu;g mL^-1 and 0.30 &mu;g mL^-1 for EES, AZI, and ROX and in the low microgram concentration range as 1.43 &mu;g mL^-1 for the CLA, respectively. The developed method succesfully tested for the determination of ROX in the commercial formulation, Runac^&reg; tablet. In the case of the optimized DPV methods the obtained detection limits for EES and AZI are in the low microgram concentration range 1.03 &mu;g mL^-1 and 1.53 &mu;g mL^-1, respectively. For the improvement of the sensitivity for AZI the DPV method was tested in combination with a&nbsp; CPE working electrode surface modified with gold nanoparticles with diameter of 10 nm (Au-CPE) and reached the limit of detection was 0.95 &mu;g mL^-1 at E_p of 0.80 V vs. SCE. The RSD of the method in the case of the Au-CPE is 3.5% while in the case of the native CPE 6.0%. The linearity of the Au-CPE based analytical method is twice wider then it is case with the bare CPE applying protocol.</p><p>Based on the obtained results it can be conclude that the appropriate combination of the optimized voltammetric pulse techniques and the environmentally friendly and easy to use working electrodes as Hg(Ag)FE, BiF-GCE and CPE together with Au-CPE resulted in the development of reliable analytical method either in the oxidation or reduction studies, often allowing trace level determination of pharmacological importance target analytes in simpler and in some case complexes systems.</p>