DNA polymerases play a fundamental role in the transmission and maintenance of genetic information and have become an important in vitro diagnostic and analytical tool. The Loop-mediated isothermal DNA amplification (LAMP) method has major applications for disease and pathogen detection and utilises the unique strand-displacement activity of a small group of thermostable DNA polymerases. The Large (Klenow-like) Fragment of Geobacillus stearothermophilus DNA polymerase I (B.st LF Pol I) currently serves as the enzyme of choice for the majority of these isothermal reactions, with few alternatives commercially available. An increasing need for point-of-care nucleic acid diagnostics is now shifting detection methods away from traditional laboratory based chemistries, such as the polymerase chain reaction (PCR), in favour of faster, and often simpler, isothermal methods. It was recognised that in order to facilitate these rapid isothermal reactions there was a requirement for alternative thermostable, strand-displacing DNA polymerases and this was the basis of this thesis. This thesis reports the successful identification of polymerases from Family A, chosen for their inherent strand-displacement activity, which is essential for the removal of RNA primers of Okazaki fragments during lagging-strand DNA synthesis in vivo. Twelve thermophilic organisms, with growth temperature ranges between 50oC and 80oC, were identified and the genomic DNA extracted. Where DNA sequences were unavailable, a gene-walking technique revealed the polA sequences, enabling the Large Fragment Pol I to be cloned and the recombinant protein over-expressed in Escherichia coli. A three-stage column chromatography purification permitted the characterisation of ten newly identified Pol I enzymes suitable for use in LAMP. Thermodesulfatator indicus (T.in) Pol I proved to be the most interesting enzyme isolated. Demonstrating strong strand-displacement activity and thermostability to 98oC, T.in Pol I is uniquely suitable to a newly termed heat-denaturing LAMP (HD-LAMP) reaction offering many potential advantages over the existing LAMP protocol. The current understanding of strand-displacement activity of Pol I is poorly understood. This thesis recognised the need to identify the exact regions and motifs responsible for this activity of the enzyme, enabling potential enhancements to be made. Enzyme engineering using site-directed mutagenesis and the formation of chimeras confirmed the importance of specific subdomains in strand-separation activity. With this knowledge, a unique Thermus aquaticus (T.aq) Pol I mutant demonstrated sufficient strand-displacement activity to permit its use in LAMP for the first time. The fusion of Cren7, a double-stranded DNA binding protein, to Pol I for use in LAMP is also reported. Although the fusion construct was found to reduce amplification speed, enhancements were observed in the presence of increased salt concentrations and it is suggested here as a means for future enzyme development.

Protoplast fusion of Lolium perenne and Lotus corniculatus for gene introgression by Sanjeev V. Raikar Lolium perenne is one of the most important forage crops globally and in New Zealand. Lotus corniculatus is a dicotyledonous forage that contains valuable traits such as high levels of condensed tannins, increased digestibility, and high nitrogen fixing abilities. However, conventional breeding between these two forage crops is impossible due to their markedly different taxonomic origin. Protoplast fusion (somatic hybridisation) provides an opportunity for gene introgression between these two species. This thesis describes the somatic hybridisation, the regeneration and the molecular analysis of the putative somatic hybrid plants obtained between L. perenne and L. corniculatus. Callus and cell suspensions of different cultivars of L. perenne were established from immature embryos and plants were regenerated from the callus. Of the 10 cultivars screened, cultivars Bronsyn and Canon had the highest percentage of callus induction at 36% each on 5 mg/L 2,4-D. Removal of the palea and lemma which form the seed coat was found to increase callus induction ability of the embryos. Plant regeneration from the callus was achieved when the callus was plated on LS medium supplemented with plant growth regulators at different concentrations. Variable responses to shoot regeneration was observed between the different cultivars with the cv Kingston having the lowest frequency of shoot formation (12%). Different factors affecting the protoplast isolation of L. perenne were investigated. The highest protoplast yield of 10×106 g-1FW was obtained when cell suspensions were used as the tissue source, with enzyme combination ‘A’ (Cellulase Onozuka RS 2%, Macerozyme R-10 1%, Driselase 0.5%, Pectolyase 0.2%), for 6 h incubation period in 0.6 M mannitol. Development of microcolonies was only achieved when protoplasts were plated on nitrocellulose membrane with a L. perenne feeder layer on PEL medium. All the shoots regenerated from the protoplast-derived calli were albino shoots. The highest protoplast yield (7×106 g-1FW) of L. corniculatus was achieved from cotyledons also with enzyme combination ‘A’ (Cellulase Onozuka RS 2%, Macerozyme R-10 1%, Driselase 0.5%, Pectolyase 0.2%), for 6 h incubation period in 0.6 M mannitol. The highest plating efficiency for L. corniculatus of 1.57 % was achieved when protoplasts were plated on nitrocellulose membrane with a L. perenne feeder layer on PEL medium. The highest frequency of shoot regeneration (46%) was achieved when calli were plated on LS medium with NAA (0.1 mg/L) and BA (0.1 mg/L). Protoplast fusion between L. perenne and L. corniculatus was performed using the asymmetric somatic hybridisation technique using PEG as the fusogen. L. perenne protoplasts were treated with 0.1 mM IOA for 15 min and L. corniculatus protoplasts were treated with UV at 0.15 J/cm2 for 10 min. Various parameters affecting the fusion percentage were investigated. Successful fusions were obtained when the fusions were conducted on a plastic surface with 35% PEG (3350 MW) for 25 min duration, followed by 100 mM calcium chloride treatment for 25 min. A total of 14 putative fusion colonies were recovered. Shoots were regenerated from 8 fusion colonies. Unexpectedly, the regenerated putative hybrid plants resembled L. corniculatus plants. The flow cytometric profile of the putative somatic hybrids resembled that of L. corniculatus. Molecular analysis using SD-AFLP, SCARs and Lolium specific chloroplast microsatellite markers suggest that the putative somatic hybrids could be L. corniculatus escapes from the asymmetric protoplast fusion process. This thesis details a novel Whole Genome Amplification technique for plants using Strand Displacement Amplification technique.

Lolium perenne is one of the most important forage crops globally and in New Zealand. Lotus corniculatus is a dicotyledonous forage that contains valuable traits such as high levels of condensed tannins, increased digestibility, and high nitrogen fixing abilities. However, conventional breeding between these two forage crops is impossible due to their markedly different taxonomic origin. Protoplast fusion (somatic hybridisation) provides an opportunity for gene introgression between these two species. This thesis describes the somatic hybridisation, the regeneration and the molecular analysis of the putative somatic hybrid plants obtained between L. perenne and L. corniculatus. Callus and cell suspensions of different cultivars of L. perenne were established from immature embryos and plants were regenerated from the callus. Of the 10 cultivars screened, cultivars Bronsyn and Canon had the highest percentage of callus induction at 36% each on 5 mg/L 2,4-D. Removal of the palea and lemma which form the seed coat was found to increase callus induction ability of the embryos. Plant regeneration from the callus was achieved when the callus was plated on LS medium supplemented with plant growth regulators at different concentrations. Variable responses to shoot regeneration was observed between the different cultivars with the cv Kingston having the lowest frequency of shoot formation (12%). Different factors affecting the protoplast isolation of L. perenne were investigated. The highest protoplast yield of 10×10⁶ g⁻¹FW was obtained when cell suspensions were used as the tissue source, with enzyme combination 'A' (Cellulase Onozuka RS 2%, Macerozyme R-10 1%, Driselase 0.5%, Pectolyase 0.2%), for 6 h incubation period in 0.6 M mannitol. Development of microcolonies was only achieved when protoplasts were plated on nitrocellulose membrane with a L. perenne feeder layer on PEL medium. All the shoots regenerated from the protoplast-derived calli were albino shoots. The highest protoplast yield (7×10⁶ g⁻¹FW) of L. corniculatus was achieved from cotyledons also with enzyme combination 'A' (Cellulase Onozuka RS 2%, Macerozyme R-10 1%, Driselase 0.5%, Pectolyase 0.2%), for 6 h incubation period in 0.6 M mannitol. The highest plating efficiency for L. corniculatus of 1.57 % was achieved when protoplasts were plated on nitrocellulose membrane with a L. perenne feeder layer on PEL medium. The highest frequency of shoot regeneration (46%) was achieved when calli were plated on LS medium with NAA (0.1 mg/L) and BA (0.1 mg/L). Protoplast fusion between L. perenne and L. corniculatus was performed using the asymmetric somatic hybridisation technique using PEG as the fusogen. L. perenne protoplasts were treated with 0.1 mM IOA for 15 min and L. corniculatus protoplasts were treated with UV at 0.15 J/cm² for 10 min. Various parameters affecting the fusion percentage were investigated. Successful fusions were obtained when the fusions were conducted on a plastic surface with 35% PEG (3350 MW) for 25 min duration, followed by 100 mM calcium chloride treatment for 25 min. A total of 14 putative fusion colonies were recovered. Shoots were regenerated from 8 fusion colonies. Unexpectedly, the regenerated putative hybrid plants resembled L. corniculatus plants. The flow cytometric profile of the putative somatic hybrids resembled that of L. corniculatus. Molecular analysis using SD-AFLP, SCARs and Lolium specific chloroplast microsatellite markers suggest that the putative somatic hybrids could be L. corniculatus escapes from the asymmetric protoplast fusion process. This thesis details a novel Whole Genome Amplification technique for plants using Strand Displacement Amplification technique.