This Master’s Thesis deals with the design of ventilation and cooling of an under roof flat in a tenement building, built in the 1980s, and consists of five main parts. Within the first main part, the thesis is dedicated to the research of the current state of knowledge in the area ofventilation and cooling of residential premises, secondly, there is a detailed description of a particular flat, thirdly, the calculation for the optimal design of ventilation and cooling are made and, in the fourth part, suggested solutions are proposed with the following evaluation of them including the overall summary. The design of ventilation and cooling was carried out according to the design procedures with respect to the relevant standards and optimized to achieve the desired effect with respect to the requirements of the owner of a housing unit. As a solution, the ventilation of a flat by the Jablotron Futura´s ventilating unit and three variants of a flat cooling were proposed. After the evaluation of all cooling variants, the Sinclair´s multisplit system of cooling was chosen as the most suitable one.

he diploma thesis prepares the documentation for permission of the construction of the town building in Ivančice.This is a building modification of the building.The object will be insulated from the outside of the polystyrene tl. 200 mm and thus the external dimensions of the building are changed to 18,855x15,955 m. The building will be roofed with a honeycomb roof on the crown system. The main entrance to the building is from the south side, behind which is a doorway allowing access to a room with a refreshment sitting and further to the entrance hall where there is a lift barrier and a two-line straight staircase allowing access to 2NP.On the left side of the elevator there is a corridor leading to technical rooms and cloakrooms for employees. From the entrance hall there is access to the closets for the public, computer rooms and staff backgrounds. After entry from the entrance hall to the entrance hall there is a toilet for the disabled and also access to social facilities separated separately for men and women. The sanitary facility for men includes two separate WC cabins, a hallway, a separate enclosed room with a urinal, a washroom with a cleaning room. Sanitary facilities for women include two separate closable WC cabins, a hall and a washroom. From the entrance there is access to the corridor allowing to the cloakroom for staff as well as to the washroom and toilet for the staff. When designing changes, emphasis was placed on preserving the original appearance of the building. The layout of the building has changed. The object meets the prescribed standards and regulations

Diploma thesis solves proposal of the boarding house in Strážnice. The building is situated in the western part of Strážnice near the boat dock. Access to the pension is from the main road or on the cycling path leading along the city river. The boarding house is designed on a bed of 50 people with the possibility of a restaurant for port visitors and the public. The building has a parking space and terrace. The boarding house is two-storey with hipped roof. In the 1st floor is a restaurant with kitchen, reception with facilities for staff and smaller rooms for guests. The second floor consists of apartments and rooms. The building is brick with monolithic ceiling construction. The roof structure consists of trusses. Integral part of the landscaping with small architecture. The façade finish consists of ceramic brick cladding, scratched plaster with wooden accessories that fit into the surrounding landscape.

The subject of my thesis is to elaborate the project documentation for construction execution of an administrative building with added production hall which is found in the town Benešov near Prague. The object of the administrative building has one underground and free above-ground floors. The underground floor serves for operating purposes connected with production. The first above-ground floor serves for staff catering. On the second above-ground floor we can find social rooms, dressing rooms and washrooms for employees. Offices can be found on the last third above-ground floor. Vertical supporting constructions on the underground floor are made of blocks filled with concrete i.e. 300 mm. On the above-ground floors rhere are vertical supporting constructions which are made by walled technology from ceramic Therm blocks i.e. 300 mm. Vertical constructions partially consist of precast wall panels and partially of monolytic panels i.e. 250 mm. The roof is designed as a flat green area. During the design processing the impact was put on increased comfort for using and overall modern concept of the object.

Subject of this thesis is elaboration study and project documentation of new firehouse building type P in Polná. New firehouse building is designed instead of the original firehouse, which was in poor technical condition and didn’t meet the new requirements. The firehouse is situated on the plot number 91/5 with adjacent numbers 91/11, 91/10, 91/7, 91/8, 91/9, 91/6, 2684, 2693. The land is slightly sloping. The building is detached, partially basement and with three aboveground floors. The vertical load-bearing structure in the basement consists of masonry from permanent formwork and in the aboveground floors the sand-lime masonry YTONG SILKA. Horizontal load-bearing structures are designed from prestressed panels Spiroll. The roof is designed as single-skin flat roof with a poured cementitious foam layer. Firehouse consists of two parts – administrative-operational part and garage of emergency vehicles with appropriate stores. The main entrance and exit of vehicles are situated southwest. The administrative of firehouse is on the 3rd floor. Fire brigade rooms are on the 2nd floor, locker rooms with clothing stores are on the 1st floor. The technical background is designed on the underground floor. Garage parking space is situated over two floors and is roofed by flat single-skin roof. Project documentation is designed according applicable laws, decrees, regulations and technical standards.

Master´s thesis, "Wine Cellar in Vlkoš “, is processed in the form of project documentation. The proposed facility is located on plot No. 2468. It is a brick building from the elements Porotherm, concrete blocks BTB, from the wood-beamed ceiling and a gabled roof. The building has two above ground and one underground floor. In the basement is a wine cellar with the production. On the first floor is a tavern with a kitchen and social rooms.V second floor rooms for accommodation.

Master’s thesis "Residential terraced house" is developed in the form of project documentation containing all requirements according to applicable regulations. The proposed facility is located in a quiet area of Hodonin and is detached. It is a six-storey new building with three underground and three above-ground floors. The building has 12 residential units. The structural system is designed with reinforced concrete monolithic ceilings. The building has a single ply flat roof.

Objective of the work is desingning the steel structure of multipurpose shopping centre. Structure is in two sections, structure A has two floors and structure B is ground floor. The main bearing components are the traversal restrained columns and the strut-frame stringers and traverse frames. Frame stringers are after the the axial distance 15 m. Ceiling are designed as a composite. The purlins are plate and trusses. The structure is desingned for the distrikt of east Morava.

The diploma theses covers the topic of "Apartment building" and is written in the form of project documentation in accordance with valid regulations. It deals with a four-storey building with a flat roof. The building was designed to provide comfortable housing for eight families on the upper two floors. The rest of the building should be used for commercial purposes so that the comfort and the privacy of the residents would be preserved.

The aim of this thesis is to develop design documents for building construction. This project deals with a new building of student hostel in Ostrava – distrikt Zábřeh nad Odrou. The new building is designed to accommodate students for year - round occupancy. There is a dining room use for staying students in the building, and students from nearby schools as well. They is also a gym, table tennis room, and multimedia classrooms available for students. House is situated on flat land. This bulding has four floors and one underground floor. The building is made of ceramics brigs blocks systém called Porotherm, underground brickwork from concrete breeze blocks, ceiling is made of pre-tensioned panel Spiroll and the type of the roof is warm flat roof.