The aim of my diplom thesis is a project of a boarding house with a restaurant. The project is created in form of project documentation including all problems and related issues. The building is situated in Bystřice pod Hostýnem. The building is without cellar with three above-ground floors and it is built from brick system POROTHERM and prestressed concrete floor slab SPIROLL. The construction has warm flat roof. Concerning house-building plot, terrain is flat without any inclination. This project is primarily focused on functional, disposal and architectural aspects of building.

Theme of this diploma thesis is a newly buil building of prison in Moravské Budějovice. The buiding has four ground floors and is without cellar. The structural system of the building is made up of permanent formwork and system Porotherm. Ceiling construction is made up of reinforced hollow core slab. The building is covered with a flat roof.

The aim of the final thesis was to design and check the steel loadbearing structure of the exhibition pavilon. The basis for the structural design was a specified building layout. The assessment of the structure was made according to valid czech and european standards, including the system of "Eurocodes". Construction is situated in Zlin. The rectangular plan of the building is 45,0 m wide and 48,0 m long. The peripheral field of the roof is flat, while the central field is designed as a barrel roof. Main truss was designed with 6,0 m centre to centre distance. Structural design of the main loadbearing elements was made by the Dlubal RFEM v.5.07 software. Selected structure elements, including joints and column anchors were verified manualy.

Master's thesis is focused on the design and assessment of load-bearing structure of the family house. Model reinforced concrete structure is created in RFEM. Elements of reinforced concrete are Assessed in accordance with EN 1992-1-1. Excepting static calculation is part of documentation the technical report and drawings shape and reinforcement.

The aim of this thesis is design of an apartment building for students. The design is in the range of the documentation for designing building construction based on the decree 499/2006 Sb. as amended by decree 62/2013 Sb. The building is situated on the plots 1220, 1219/1, 1218/11 and 1218/2 in the cadastral area „Letovice“. The new building is designed to accommodate students for year-round occupancy. There is a dining room for staying students and students from nearby schools as well. In the new building are also multimedia classrooms, library, reading rooms, club rooms, gym and lecture hall available for students. In the building are 30 rooms. The capacity of the building is designed to accommodate 81 students. The building has three floors, a loft and no basement. Masonry is designed from clay blocks and floor slab is designed as a cast-in-place reinforced concrete floor structure.

Novostavba, veřejná stavba, studentské ubytování, stravování, studovna, parkoviště, keramické zdivo, skelet, plochá střecha, železobeton, předpjaté stropní panely, ETICS The task of the diploma thesis “Novostavba kolejí v Brně” is to elaborate the documentation according to the current version of the regulation No. 499/2006 Sb. The aforesaid compound is situated on an actual estate in a built-in area of the city of Brno, cadastral community of Královo Pole. The building functions as an accommodation for students of the University of Defence. The building is divided in three parts – two of them function as an accommodation, the third one incorporates conveniences of the hall of residence (boarding, administration, storeroom, library). The accommodation part has 5 floors in total, the conveniences are situated on the 2 above-ground floors and the basement. The compound is a wall construction with the ETICS weatherproofing insulation, combined with columns in the central section. The ceiling construction is made of reinforced concrete and prestressed concrete ceilings. The roof is flat and vegetative. The diploma thesis includes architectural study, preparatory works and specializations in the field of founding.

The master´s thesis is focused on a design of monolithic reinforced concrete construction of an apartment building. The content of this work is design of two ceiling slabs, staircase, supporting columns, walls, girders and concrete pile construction of foundation. Thesis includes working-out of static calculation, elaboration drawing of shape, reinforcement of solved elements and evolvement of assembly drawings. The rest of the project parts are not analysed.

This master thesis deals with study of area, which is intended for construction of apartments building and public facilities. Four building are projected with visually connection by a covered parking place. There are three apartments building and one multifunctional building. The aim of this master thesis is elaboration of project documentation for the implementation of new multifunctional house in the area of the city Uherský Brod. In the first floor is designed café, which has its own entrance. In the second part of the floor is household equipment and utility room, which also has a separate entrance from outside. In the second to fourth floor is ten housing units of different sizes. The object is located on a gently sloping land in the northern part of Uherský Brod in the new city district called “Nad Zámkem”. Wall construction is designed from Porotherm elements. Ceiling construction is monolithic reinforced concrete. Roofing is solved by single-flat roof. The drawing part of this master thesis is processed in AutoCAD.

This diploma thesis is concerning construction technological project for construction of steel hall for agricultural company in Otice. It contains study of the realization of the main technological phases of the object, solution of major traffic routes for materiál supplying, time schedule and financial plan, project for construction zone equipment, draft of the building machines and mechanism, technological specifications for mounting of the supporting structures and ceiling structures Spiroll, control plan and trial plan including risks with safety solution for both phases. It is also prepared itemized budget and construction details. The basis for this diploma thesis was design documentation.

The aim of the diploma thesis is to design heating and cooling in the office building and the showroom. The theoretical part deals with large-scale heating and cooling systems. The types of these systems and their advantages and disadvantages are described here. The practical part is devoted to the design of heating and cooling in the assigned office building and the showroom. In this part, two variants of the design are considered. The first variant considers the use of a heat pump as a source of heat and cold. In the second variant of the solution, a gas condensing boiler is used as a heat source and a chiller as a cold source. The experimental part deals with measuring the properties of one ceiling panel. The main task was to determine the cooling capacity of the ceiling panel.