Spelling suggestions: "subject:"swingers"" "subject:"swings""
1 |
Modern technologies of fabrication and testing of large convex secondary mirrorsOh, Chang Jin, Lowman, Andrew E., Dubin, Matt, Smith, Greg, Frater, Eric, Zhao, Chunyu, Burge, James H. 22 July 2016 (has links)
Modern large telescopes such as TAO, LSST, TMT and EELT require 0.9m-4m monolithic convex secondary mirrors. The fabrication and testing of these large convex secondary mirrors of astronomical telescopes is getting challenging as the aperture of the mirror is getting bigger. The biggest challenge to fabricate these large convex aspheric mirrors is to measure the surface figure to a few nanometers, while maintaining the testing and fabrication cycle to be efficient to minimize the downtime. For the last a couple of decades there was huge advancement in the metrology and fabrication of large aspheric secondary mirrors. College of Optical Sciences in the University Arizona developed a full fabrication and metrology process with extremely high accuracy and efficiency for manufacturing the large convex secondary mirrors. In this paper modern metrology systems including Swing-Arm Optical Coordinate Measuring System (SOCMM) which is comparable to Interferometry and a Sub-aperture stitching interferometry scalable to a several meters have been presented. Also a Computer Controlled Fabrication Process which produces extremely fine surface figure and finish has been demonstrated. These most recent development has been applied to the fabrication and testing of 0.9m aspheric convex secondary mirror for the Tokyo Atacama Observatory's 6.5m telescope and the result has been presented.
|
2 |
Návrh výroby kompozitní kyvné vidlice / Manufacturing concept of a composite swing armGregor, Lukáš January 2020 (has links)
The subject of this master’s thesis is manufacturing design and production of CFRP swingarm prototype for off-road motorcycle. Theoretical part describes conventional types of swingarm, provides basic introduction to composites and manufacturing technologies. Practical part describes production steps, assembly jigs and assembly process. The last part of thesis deals with measuring stiffness properties using photogrammetry system TRITOP.
|
Page generated in 0.0372 seconds