Spelling suggestions: "subject:"swift combustion""
1 |
Design and Development of a High Swirl Burner with Gaseous Fuel Injection through Porous TubesRamalingam Ammaiyappan, Arul Kumaran January 2017 (has links)
No description available.
|
2 |
Sensing and Dynamics of Lean Blowout in a Swirl Dump CombustorThiruchengode, Muruganandam 11 April 2006 (has links)
This thesis describes an investigation on the blowout phenomenon in gas turbine combustors. The combustor primarily used for this study was a swirl- and dump-stabilized, atmospheric pressure device, which did not exhibit dynamic combustion instabilities. The first part of the thesis work concentrated on finding a sensing methodology to be able to predict the onset of approach of combustor blowout using optical methods. Temporary extinction-reignition events that occurred prior to blowout were found to be precursor events to blowout. A threshold based method was developed to identify these events in the time-resolved sensor output. The number and the average length of each event were found to increase as the LBO limit (fuel-air ratio) is approached. This behavior is used to predict the proximity to lean blowout.
In the second part of this study, the blowout sensor was incorporated into a control system that monitored the approach of blowout and then actuated an alternate mechanism to stabilize the combustor near blowout. Enhanced stabilization was achieved by redirecting a part of the main fuel to a central preinjection pilot injection. The sensing methodology, without modification, was effective for the combustor with pilot stabilization. An event based control algorithm for controlling the combustor from blowing out was also developed in this study. The control system was proven to stabilize the combustor even when the combustor loading was rapidly changed.
The final part of this study focused on understanding the physical mechanisms behind the precursor events. High speed movies of flame chemiluminescence and laser sheet scattering from oil droplets seeded into the reactants were analyzed to explain the physical processes that cause the extinction and the reignition of the combustor during a precursor event. A physical model for coupling of the fluid dynamics of vortex breakdown and combustion during precursor and blowout events is proposed.
This model of blowout phenomenon, along with the sensing and control strategies developed in this study could enable the gas turbine combustor designers to design combustors with wider operability regimes. This could have significant payoffs in terms of reduction in NOx emissions from the combustor.
|
3 |
Effect of Rayleigh-Taylor Instability on Fuel Consumption Rate: A Numerical InvestigationLong, Brandon Scott 24 August 2017 (has links)
No description available.
|
Page generated in 0.1068 seconds