published_or_final_version / Electrical and Electronic Engineering / Doctoral / Doctor of Philosophy

Thesis (Ph. D.)--University of Hong Kong, 2002. / Includes bibliographical references (leaves 163-183).

This work presents the modeling and analysis of EMI and thermal performance for switch power supply by using the CAD tools. The methodology and design guidelines are developed. By using a boost PFC circuit as an example, an equivalent circuit model is built for EMI noise prediction and analysis. The parasitic elements of circuit layout and components are extracted analytically or by using CAD tools. Based on the model, circuit layout and magnetic component design are modified to minimize circuit EMI. EMI filter can be designed at an early stage without prototype implementation. In the second part, thermal analyses are conducted for the circuit by using the software Flotherm, which includes the mechanism of conduction, convection and radiation. Thermal models are built for the components. Thermal performance of the circuit and the temperature profile of components are predicted. Improved thermal management and winding arrangement are investigated to reduce temperature. In the third part, several circuit layouts and inductor design examples are checked from both the EMI and thermal point of view. Insightful information is obtained. / Master of Science

Conducted Electromagnetic Interference (EMI) is a major cause of concern in switchmode power supplies (SMPS) which commonly use standard pulsewidth modulation (PWM). In this thesis, Sigma-Delta (����) modulation is proposed as an alternative switching technique to reduce conducted EMI from SMPS. The result of using ���� modulation is a spread in the spectrum of the conducted emissions so that large concentrations of power at discrete frequencies are avoided. Experimental time-domain waveforms and spectra of the switching function from first-order and second-order ���� modulators are presented to prove the viability of the scheme in EMI mitigation. These modulators are then applied to an off-the-shelf computer power supply and experimental results using FCC-specified methods show a reduction of roughly 5-10dB in EMI emissions over standard PWM modulators. / Graduation date: 1999

published_or_final_version / Electrical and Electronic Engineering / Doctoral / Doctor of Philosophy

Thesis (Ph.D.)--Auburn University, 2005. / Abstract. Vita. Includes bibliographic references (ℓ. 164-173)

Thesis (Ph. D.)--University of Missouri-Columbia, 2007. / The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on February 14, 2008) Vita. Includes bibliographical references.

Dissertation (Ph.D.)--Auburn University, / Abstract. Vita. Includes bibliographic references (p.109-113).

Thesis (M.S. in electrical engineering)--Washington State University, December 2006. / Includes bibliographical references (p. 57-59).

M.Ing. / In this investigation charge balancing will be investigated from an Electro-Magnetic- Compatibility perspective. The primary sources of common mode Electro-Magnetic- Interference in switching converters are the switching nodes. This is mainly due to the parasitic capacitance between the switching node and the reference earth. Filtering components that are currently used take up a lot of valuable space resulting in the products overall size and cost to increase. Combating common mode current at the source will drastically reduce the size or the need for these large filters. This investigation will focus on a simple method of reducing common mode noise (produced by the switching node), of a two wire system, at the source by making use of a compensating winding which requires very little or no additional space; a buck converter will be used to illustrate the concept. The investigation will start with an overview of Electro-Magnetic-Interference and its components (common and differential mode noise). This investigation will deal with the measurement of common and differential mode noise as well as general Electro-Magnetic-Interference measurement. A design of the buck converter and its drive circuit will also be presented. Reducing the common mode noise by making use of charge balancing using planar inductors will then be presented. This investigation contains the theoretical analysis as well as experimental results to validate the theory. The experiments show encouraging results in using this technique to minimise common mode noise in switched-mode-power-supplies.