Transient stability analysis is an important part of power planning and operation. For large power systems, such analysis is very time consuming and expensive. Therefore, an online transient stability assessment will be required as these large power systems are operated close to their maximum limits. In this thesis swallowtail catastrophe is used to determine the transient stability regions. The bifurcation set represents the transient stability region in terms of power system transient parameters bounded by the transient stability limits. The system modelling is generalized in such, that the analysis could handle either one or any number of critical machines. This generalized model is then tested on a three-machine as well as a seven-machine system. The results of the stability analysis done with the generalized method is compared with the time solution and the results were satisfactory. The transient stability regions determined are valid for any changes in loading conditions and fault location. This method is a good candidate for on-line assessment of transient stability of power systems. / Applied Science, Faculty of / Electrical and Computer Engineering, Department of / Graduate

No description available.

No description available.

No description available.

Thesis (MScIng)--University of Stellenbosch, 2004. / ENGLISH ABSTRACT: Electricity theft in South Africa has become a major problem. This led to several developments from both industries and research institutes to counter these actions. Since equipment is already installed and major capital has been invested to provide electricity for a broad spectrum of consumers, the challenge is to find a low cost solution harnessing current investments and technology to detect electricity theft more accurately. This thesis investigates into the electricity theft topic. Two different methods, Time Domain Pulse Reflectometry and a data driven platform based on the Theory of Constraints philosophy, were investigated to provide means to detect and determine the impact of illegal electricity usage. Both methods required detailed designs to conduct preliminary proof of concept tests in a laboratory environment. These methods are evaluated against their economical viability, possible practical implications and applications. This thesis presents a practical approach to electricity theft detection and provides the basic tools for management of this ever-increasing problem. / AFRIKAANSE OPSOMMING: Suid Afrika se elektrisiteit diefstal statistiek het die afgelope jare skrikwekkend gegroei. Dit het die industrie genoop om baie meer navorsing in die area te doen. Met reeds gevestigde toerusting en tegnologie om di´e energie medium so effektief moontlik te versprei, is die uitdaging juis om ’n ekonomiese oplossing te vind om reeds beskikbare tegnologie¨e meer doeltreffend aan te wend. Die doel van die tesis is om die gebied van elektrisiteit diefstal na te vors. Twee verskillende metodes is ondersoek, naamlik Tydgebied-pulse-reflektometrie en ’n informasie gebaseerde stelsel wat op die Randvoorwaarde Teorie gebaseer is, om effektief die omvang van elektrisiteit diefstal in ’n mikro, asook makro omgewing te bepaal. Die twee metodes is in ’n beheerde omgewing getoets sodat die konsepte wat ontwikkel is bewys kon word. Die metodes is ge-evalueer in terme van die ekonomiese lewensvatbaarheid daarvan met inagneming van die praktiese implikasies. Die tesis bied bestuur die nodige kennis om elektrisiteit diefstal in die praktyk doeltreffend die hok mee te slaan.

A project report submitted to the Faculty of Engineering, University of the Witwatersrand, in partial fulfilment of the requirements for the degree of Master of Science in Engineering. Johannesburg 1995. / Advances in digital computing technology make it possible to improve the design of the Man Machine Interface (MMI), SCADA and ALARM modules used in electrical utility control centres. to overcome the problem of control staff data overloading. A possible solution is proposed, based on-an explicit representation of a disturbed power system state in addition to quiescent conditions. The structure of modem SCADA, installations is analysed in terms of the computing power of full graphic workstations, the quantities of element data delivered to the control room and the capabilities of intelligent remote terminal units. This analysis indicates that existing designs for the presentation of SCADA data need to change to solve the data overloading-problem. The proposed philosophy moves the focus of attention from the element level up to the device level by grouping and dividing all elements into categories at the RTU and linking them to their parent device, Control staff are notified graphically on the one-line displays, next to the device in question, of the existence of abnormal elements by category. The element state details for the device are only displayed on demand, resulting in a 95% reduction of alarm text messages. Suggestions are made as to the software functions needed at tbe RTU and the workstation to assist with the display of system data. Lastly racommendations are offered to reduce maintenance by standardising and pre-ordering device element data. / AC2017

by Kin Kwong Leung. / Thesis submitted in: November 1999. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2000. / Includes bibliographical references (leaves 67-[70]). / Abstracts in English and Chinese. / Chapter 1 --- Introduction --- p.1 / Chapter 1.1 --- Code Division Multiple Access (CDMA) --- p.1 / Chapter 1.1.1 --- The Cellular Concept --- p.2 / Chapter 1.2 --- Fading and Power Control --- p.3 / Chapter 1.2.1 --- Large Scale Fading --- p.3 / Chapter 1.2.2 --- Small Scale Fading --- p.4 / Chapter 1.2.3 --- Power Control --- p.5 / Chapter 1.2.4 --- Standard Interference Function --- p.5 / Chapter 1.3 --- Previous Work --- p.6 / Chapter 1.3.1 --- Power Control --- p.6 / Chapter 1.3.2 --- Convergence Analysis --- p.8 / Chapter 1.4 --- Scope of this Thesis --- p.8 / Chapter 1.5 --- Organization of the Thesis --- p.9 / Chapter 2 --- System Model --- p.10 / Chapter 2.1 --- System and Definitions --- p.10 / Chapter 2.2 --- Varying Link Gains Model --- p.11 / Chapter 2.3 --- SIR model in CDMA System --- p.13 / Chapter 2.4 --- Simulation Model --- p.14 / Chapter 3 --- Fade Margin --- p.17 / Chapter 3.1 --- Introduction --- p.17 / Chapter 3.2 --- Fixed-step Power Control Algorithm --- p.18 / Chapter 3.3 --- Definitions and Feasibility of SIR --- p.19 / Chapter 3.3.1 --- Definition --- p.19 / Chapter 3.3.2 --- Feasibility --- p.20 / Chapter 3.4 --- Performance Analysis on Fading Channel --- p.22 / Chapter 3.4.1 --- Single-User --- p.22 / Chapter 3.4.2 --- Multiple-User --- p.24 / Chapter 4 --- Generalized Step Power Control Algorithm --- p.28 / Chapter 4.1 --- Introduction --- p.28 / Chapter 4.2 --- Generalized Fixed Step Power Control Algorithm --- p.29 / Chapter 4.3 --- Existence of the Solution --- p.30 / Chapter 4.4 --- Parameter Optimization --- p.31 / Chapter 4.4.1 --- Single-User --- p.34 / Chapter 4.4.2 --- Multiple-User --- p.37 / Chapter 4.5 --- Performance Analysis --- p.41 / Chapter 4.5.1 --- Single-User --- p.41 / Chapter 4.5.2 --- Multiple-User --- p.42 / Chapter 4.6 --- Hybrid Scheme --- p.47 / Chapter 5 --- Convergence Analysis --- p.49 / Chapter 5.1 --- Introduction --- p.49 / Chapter 5.2 --- Totally Asynchronous Models --- p.50 / Chapter 5.3 --- Normalized Interference Function --- p.52 / Chapter 5.4 --- Existence of Quantized Solution --- p.53 / Chapter 5.5 --- Convergence Theorem --- p.55 / Chapter 6 --- Conclusion and Future Work --- p.64 / Chapter 6.1 --- Conclusion --- p.64 / Chapter 6.2 --- Future Works --- p.65 / Bibliography --- p.67

Extensive studies have been undertaken on the transient stability of large interconnected power systems with flexible ac transmission systems (FACTS) devices installed. Varieties of control methodologies have been proposed to stabilize the postfault system which would otherwise eventually lose stability without a proper control. Generally speaking, regular transient stability is well understood, but the mechanism of load-driven voltage instability or voltage collapse has not been well understood. The interaction of generator dynamics and load dynamics makes synthesis of stabilizing controllers even more challenging. There is currently increasing interest in the research of neural networks as identifiers and controllers for dealing with dynamic time-varying nonlinear systems. This study focuses on the development of novel artificial neural network architectures for identification and control with application to dynamic electric power systems so that the stability of the interconnected power systems, following large disturbances, and/or with the inclusion of uncertain loads, can be largely enhanced, and stable operations are guaranteed. The latitudinal neural network architecture is proposed for the purpose of system identification. It may be used for identification of nonlinear static/dynamic loads, which can be further used for static/dynamic voltage stability analysis. The properties associated with this architecture are investigated. A neural network methodology is proposed for dealing with load modeling and voltage stability analysis. Based on the neural network models of loads, voltage stability analysis evolves, and modal analysis is performed. Simulation results are also provided. The transient stability problem is studied with consideration of load effects. The hierarchical neural control scheme is developed. Trajectory-following policy is used so that the hierarchical neural controller performs as almost well for non-nominal cases as they do for the nominal cases. The adaptive hierarchical neural control scheme is also proposed to deal with the time-varying nature of loads. Further, adaptive neural control, which is based on the on-line updating of the weights and biases of the neural networks, is studied. Simulations provided on the faulted power systems with unknown loads suggest that the proposed adaptive hierarchical neural control schemes should be useful for practical power applications. / Graduation date: 1999

The full capacity of the existing transmission lines is often underutilized due to the system stability requirements. Controllable network devices represent the effective means of improving the system stability, and their deployment allows better use of the existing transmission facilities and can help to avoid construction of new lines. This dissertation addresses system analysis and modeling of controllable network devices. Transient angle stability is one of the major requirements limiting transfer capability of the power transmission systems. The theoretical concepts of transient angle controllability using controllable network devices are considered in this dissertation. The main results are derived for a general transmission network structure and applied to series and shunt compensators as well as braking resistors. The proposed approach allows to quantify controllability and to relate it to the control device size, type and location in the transmission network. Transient stability controllers are needed to maximize the device effect on the transient angle stability enhancement. The transient stability controller functional structure is discussed and the design requirements for each component are specified. The examples of controller designs are presented. Emerging technologies such as Thyristor-Controlled Series Compensators and Synchronous Voltage Sources offer superior control capabilities and performance characteristics as compared to conventional compensators. Unlike conventional compensators, the new controllable network devices are very complex dynamical systems and require more comprehensive modeling for time-domain studies and controller designs. Detailed models of a Thyristor-Controlled Series Compensator and a Synchronous Voltage Source for powerflow, transient stability, and electro-magnetic transient studies are presented. Finally, a detailed planning study for increasing transfer capability of the Montana transmission system using controlled series compensation is presented. A variety of design and performance requirements is considered in this study, which makes it a useful reference for similar planning projects. / Graduation date: 1996

Sherman M. Chan, Michael Athans. / Bibliography: leaf 9. / Caption title. "August 15, 1981." / Supported by the U.S. Department of Energy, Division of Electric Energy Systems, under Contract DE-AC01-78RA03395