Global ETD Search

1	Classification, analysis, and control of planar tensegrity structures for robotic applications Schmalz, Andrew Peter. January 2007 (has links) Thesis (M.S.M.E.)--University of Delaware, 2006. / Principal faculty advisor: Sunil K. Agrawal, Dept. of Mechanical Engineering. Includes bibliographical references. Robotics. Tensile architecture.
2	Computer method for the generation of the geometry of tensegrity structures Charalambides, Jason Evelthon, Liapi, Katherine A., January 2004 (has links) (PDF) Thesis (Ph. D.)--University of Texas at Austin, 2004. / Supervisor: Katherine A. Liapi. Vita. Includes bibliographical references.
3	The felt tent in middle Asia the nomadic tradition and its interaction with princely tentage. Andrews, Peter Alford. January 1980 (has links) Thesis (doctoral)--University of London, 1980. / BLDSC reference no.: DX187925. Tents Yurts Tensile architecture Nomads
4	Parametric design methodology and visualization for single curvature tensegrity structures Kim, Jinman, Liapi, Katherine A., January 2004 (has links) (PDF) Thesis (Ph. D.)--University of Texas at Austin, 2004. / Supervisor: Katherine A. Liapi. Vita. Includes bibliographical references. Also available from UMI.
5	Continuum structural representation of flexure and tension stiffened one-dimensional spacecraft architectures Larsen, Jeffrey James. January 2009 (has links) (PDF) Thesis (MS)--Montana State University--Bozeman, 2009. / Typescript. Chairperson, Graduate Committee: Christopher H. M. Jenkins. Includes bibliographical references (leaves 59-61).
6	Tensile behavior of aluminum reinforced with angle-ply boron epoxy laminates Wong, Daniel Ming-Fei 07 July 2010 (has links) An experimental investigation of the tensile behavior of aluminum reinforced with angle-ply boron/epoxy laminates was conducted. It is shown that the ultimate stresses of a wide variety of laminate configurations fall within a very narrow range of values. Some configurations of composite reinforced aluminum laminates exhibited higher ultimate stress values than the corresponding all composite laminates while other configurations exhibited lower ultimate stresses than the corresponding all composite laminates. Elastic moduli and Poisson ratios agreed quite well with predicted values but strength predictions were inconsistent. / Master of Science LD5655.V855 1974.W66 Aluminum Tensile architecture
7	Computer method for the generation of the geometry of tensegrity structures Charalambides, Jason Evelthon 28 August 2008 (has links) Not available / text Architecture--Mathematics
8	The ephemeral architecture of mas(k) National Centre for Carnival and Culture Trinidad & Tobago / Lewis, Camille D. January 1900 (has links) Thesis (M.Arch.) - Carleton University, 2006. / Includes bibliographical references (p. 130-131). Also available in electronic format on the Internet.
9	Tensile creep of 2024-T3 aluminum-alloy sheet under varying load conditions Berkovits, Avraham January 1960 (has links) Three theories - the time-hardening theory, the strain-hardening theory, and the life-traction theory - are investigated in an effort to predict creep strains under conditions of varying loads from data obtained at constant load in the range of interest to the structural designer. A method is presented for computing an equivalent rupture stress for the varied load case using the lite-traction theory and the rupture curve tor constant stress tests. The analytical methods are compared with data obtained from 2024-T3 aluminum-alloy sheet under tensile creep at constant and varying loads. / M.S. LD5655.V855 1960.B475 Aluminum alloys -- Creep Tensile architecture
10	Parametric design methodology and visualization for single curvature tensegrity structures Kim, Jinman 28 August 2008 (has links) Not available / text Cable structures--Mathematical models Cable structures--Computer-aided design Structural analysis (Engineering)

Search results