The diploma thesis deals with mathematical modeling of the resource allocation problem in an energy system with respect to technical parameters of the used resources. The model includes random input variables affecting the amount of demand and constraints related to associated risks. The thesis addresses control of the operation of various types of boilers and also extends the system with a heat storage tank examining its impact on the behavior of the system and achieved results. The optimization model is based on a multi-period two-stage scenario model of stochastic programming and works with simulated data, which combines real data, statistically determined estimates, and the use of logistic regression. The implementation utilizes GAMS software. When comparing the achieved results with the current state, it was found that the heat storage tank has a positive effect on the function of the system as it allows for extended usage of the cheaper unregulated sources by storing surplus heat, and thus helps to reduce the overall costs of the system.

The aim of this thesis is to design the water-cooling system for a synchronous motor with an output of 10kW. The power loss was analytically determinated. For the initial water-cooling system and for two design proposals, thermal models were calculated in Ansys. The same boundary conditions were set for all three models. Then the analysis results of the temperature distribution on the machine surface and in the slots were compared. The comparison also includes the economical cost of the production and service of the machine. Then the production documentation was created, consisting of the assembly drawings and a simplified technological process.

This diploma thesis is divided into two parts - theoretical and practical. In its first, theoretical part, deals with the theory of fluid and gas flow, heat transfer and diversification of sensors for flow measurement working on the electrical principle. It also deals with thermodynamic principle, which can be used for measuring very small flow and low-temperature ceramics that is used to implement microcanals for sensing very low flows. The practical part of the thesis deals with the very simulation of the entire structure in the program “COMSOL Multiphysics” - both in 2D and 3D views. Then there is shown the implementation and measurement of the flow sensor in a low-temperature ceramics, working on a thermodynamic principle.

his Diploma thesis deals with non-contact measurement of surface temperatures. Describes the basic physical principles by which individual instruments are designed, their technical parameters and compares the different types. It deals with the applications of this technology in various fields of human activity and especially its use in engineering.

The thesis deals with the modeling and prediction of corrosion of radiation tube snake in the heating furnace. Specifically it is focused on vertical cylindrical furnace which is included in the catalytic hydrocracking unit and serves for heating aggressive circulation gas which is the cause of high temperature corrosion. An important basis for the creation of computational models are available records about the operation of the furnace and about the corrosion and degradation mechanisms during the lifetime of the tube system in furnace. Such information enables the creation of a computational model which is based on the prediction of high-temperature corrosive damage of radiation tube snake. The computational model involving all relevant factors may serve as the basis for a predictive life management system of radiation snakes in the heating furnace.

While using iron castings behind temperature of 500 oC namely at cyclic heat straining, degradation of structure and breaching iron castings. For this purpose introduce cast iron with content of Si and Mo. Focusing on improvement of SiMo51 for increased high-temmperature corrosion-and fatigue life in exhaust-gas temperatures up to 800 oC. Thesis set up survey types alloys, properties, and way of casting production.

The master‘s thesis deals with the influence of the thermal cycle of welding with preheat on castings made of grey cast iron to change the hardness. The thesis deals with the classification of graphitic cast irons, their structure, properties and influences they have on the formation and transformation of the structure. Emphasis is placed on chemical composition and structure stability at elevated temperatures. The practical part deals with the investigation of the effects of casting repair on the decrease of hardness measured in the foundry Heunisch Brno.

This thesis aims at automotive starters, their construction, characteristics and problems with starting at low temperatures. There are kinds of starters, function principle, construction, advantages and disadvantages in the first part of thesis. Issues with combustion engine starting and basic technical requirements are also mentioned here; characteristics and importance of starters and combustion engines are also described. Last chapters of this part are dedicated to finite element method and its implication. There are analytical calculations of starter in the second part of thesis. Results are compared with experimental obtained (measured) values and results from RMxprt. Finite element method results are compared, too. Magnetic induction improvement in stator is also suggested.

The diploma thesis contains an energy audit of the figure skating hall. In the first part I focused on the analysis of the topic, fire regulations and laws relating to given theme, recent technical, theoretical and experimental solutions in practice. In the next part, I compiled the of building energy audit of building, including its mandatory annexes. In the last part, I presented the results of measurements in the evaluated object.

The topic of this diploma thesis is heating of apartment buildings, where an attention was focused on thermal comfort in heated rooms. The first theoretical part brings results of CFD simulations which compare radiators with floor heating. The second part consits of practical application o the given building. There are two options in this project - heating by radiators or floor heating. The third part describes two experiments - measurement of indoor environment in two rooms and measurement of gas consumption in apartment buildings with different heating concepts. In the last part the mean radiant temperature is simulated. There are compared different kind of heating, which have impact to distribution of mean radiant temperature in the room. The personal software was created for deeper understanding of mean radiant temperature.