Diagnosis temperature is one of the most important disciplines. We meet it in everyday life, but it is very important for all sectors of industry. This is a measurement providing an immediate state of the measured object. Contact measurement of different temperature sensors and contactless measurement using thermal imagers. The important part is the measurement of temperature rise of induction motor. Part of the work deals with losses in the electric motor. These losses are converted into heat, which affects from various parts of the machine. Correct identification of the temperature field is important in helping to design the cooling system of the instrument. Virtually the data obtained are compared with theoretical data. We will capture part of the device and realize thermal simulations in a suitable simulation program. We propose modifying the cooling machine and the resulting data from the simulation compares.

This thesis is concerned with thermodiagnostics in industrial practise, which is very important for the assessment of technical condition of object on the basis of temperature, in today's time. It includes summary of contact and contact-free methods and their principle, advantages and disadvantages for aplication in industrial practise. Because of thesis it was carried out measurement in company Daikin Device Czech republic with the use of contact thermometer and two available thermocameras for solving of topical tasks relating to production.

The first part of the final thesis is focused on the use of thermovision for diagnosing defects and failures in building industry. Documented history, physical principles and conditions for the measuring of thermographic camera are described in this part. Thermal images of the object described below were used for demonstrating the defects. The second part is dedicated to the elaborated energy assessment for a nine-storey slab block building. In total, there are five energy economic measures developed for the building. Three of those are of structural character and two of those are for building equipment. There are two variants designed based on the measures, one of which is recommended and evalu-ated. The final section is focused on the measurement of slab block building indoor environment (CO2, air temperature, relative humidity, dew point) and its assessment in concern with the current legislation.

This thesis deals with common problem health protection at work. Namely hand protection during the work in very cold environment. It’s an analysis of materials suitable for apparatus used for measuring the thermal resistance of the gloves. There was analysed a range of materials. Every single sample was tested for heat conductivity and afterwards was assessed the suitability of materials. Heat was generated by electricity. Ocured heat fields was assessed with thermocamera. After performed experiments of carbon fiber we haven’t reached any satisfying results which we could use for manufacturing of this device. On the other hand kapton film has given very interesting results which we would recommend eventually. Kapton film needs to be modify according to the method listed in the conlusion. This thesis gives us a clear overview and inspiration for additional research of this device. It finds it’s place in research facilities and companies manufacturing protective clothing.

This diploma thesis deals with the operation of radiators. It is divided into three parts. The first part describes the various types of radiators and heating surfaces, radiator control and heat measurement, the second part deals with the design of heating and hot water in an apartment building in Brno in two variants of the conceptual solution and the third part is processed in the form of experimental measurements issues of radiator operation during a real day in the heating season and operating conditions that may occur.