No description available.

No description available.

The electric power distribution system usually operates a radial configuration, with tie switches between circuits to provide alternate feeds. The losses would be minimized if all switches were closed, but this is not done because it complicates the system's protection against overcurrents. Whenever a component fails, some of the switches must be operated to restore power to as many customers as possible. As loads vary with time, switch operations may reduce losses in the system. Both of these are applications for reconfiguration. The problem is combinatorial, which precludes algorithms that guarantee a global optimum. Most existing reconfiguration algorithms fall into two categories. In the first, branch exchange, the system operates in a feasible radial configuration and the algorithm opens and closes candidate switches in pairs. In the second, loop cutting, the system is completely meshed and the algorithm opens candidate switches to reach a feasible radial configuration. Reconfiguration algorithms based on linearized transshipment, neural networks, heuristics, genetic algorithms, and simulated annealing have also been reported, but not widely used. These existing reconfiguration algorithms work with a simplified model of the power system, and they handle voltage and current constraints approximately, if at all. The algorithm described here is a constructive method, using a full nonlinear power system model that accurately handles constraints. The system starts with all switches open and all failed components isolated. An optional network power flow provides a lower bound on the losses. Then the algorithm closes one switch at a time to minimize the increase in a merit figure, which is the real loss divided by the apparent load served. The merit figure increases with each switch closing. This principle, called discrete ascent optimal programming (DAOP), has been applied to other power system problems, including economic dispatch and phase balancing. For reconfiguration, the DAOP method's greedy nature is mitigated with a backtracking algorithm. Approximate screening formulas have also been developed for efficient use with partial load flow solutions. This method's main advantage is the accurate treatment of voltage and current constraints, including the effect of control action. One example taken from the literature shows how the DAOP-based algorithm can reach an optimal solution, while adjusting line voltage regulators to satisfy the voltage constraints. / Ph. D.

This research examines women's ways of understanding health and illness as well as their means of maintaining wellness. It attempts a women-centred approach to explaining health behaviours. The research consisted of in-depth interviews with seven women from Southern Ontario between the ages of 50 and 70. A grounded theory approach guided the analysis. The study shows that perceptions of power and control may be at the root of many attitudes toward health care and various health behaviours. By researching health issues from women's perspectives, this research provides a glimpse of the way these seven women experience midlife, and suggests the existance of perspectives that differ from mainstream views on health and illness. It further demonstrates how theories of agency can be used to shift the focus of sociological research from over-socialized accounts of health-related behaviours to more empowering, woman-centred explanations. It shows that women strive to maintain control of their health and that they pursue wellness in a manner that enables them to keep that control. / Thesis / Master of Arts (MA)

This thesis is devoted to the development of new models for a recently-implemented FACTS (flexible alternating current transmission system) device, the unified power flow controller (UPFC), and the control coordination of power systems with FACTS devices in steady-state operating mode. The key objectives of the research reported in the thesis are, through online control coordination based on the models of power systems having FACTS devices, those of maximising the network operational benefit and restoring system static security following a disturbance or contingency. Based on the novel concept of interpreting the updated voltage solutions at each iteration in the Newton-Raphson (NR) power-flow analysis as dynamic variables, the thesis first develops a procedure for representing the unified power flow controllers (UPFCs) in the steady-state evaluation. Both the shunt converter and series converter control systems of a UPFC are modeled in their dynamical form with the discrete time variable replaced by the NR iterative step in the power-flow analysis. The key advantage of the model developed is that of facilitating the process of UPFC constraint resolution during the NR solution sequence. Any relative priority in control functions pre-set in the UPFC controllers is automatically represented in the power-flow formulation. Although the developed UPFC model based on the dynamic simulation of series and shunt converter controllers is flexible and general, the number of NR iterations required for convergence can be large. Therefore, the model is suitable mainly for power system planning and design studies. For online control coordination, the thesis develops the second UPFC model based on nodal voltages. The model retains all of the flexibility and generality of the dynamic simulation-based approach while the number of iterations required for solution convergence is independent of the UPFC controller dynamic responses. Drawing on the constrained optimisation based on Newton’s method together with the new UPFC model expressed in terms of nodal voltages, a systematic and general method for determining optimal reference inputs to UPFCs in steady-state operation is developed. The method is directly applicable to UPFCs operation with a high-level line optimisation control (LOC) for maximising the network operational benefit. By using a new continuation technique with adaptive parameter, the algorithm for solving the constrained optimisation problem extends substantially the region of convergence achieved with the conventional Newton’s method. Having established the foundation provided by the comprehensive models developed for representing power systems with FACTS devices including the UPFC, the research, in the second part, focuses on real-time control coordination of power system controllers, with the main purpose of restoring power system static security following a disturbance or contingency. At present, as the cost of phasor measurement units (PMUs) and wide-area communication network is on the decrease, the research proposes and develops a new secondary voltage control where voltages at all of the load nodes are directly controlled, using measured voltages.

Thesis (MScIng)--University of Stellenbosch, 2004. / ENGLISH ABSTRACT: Electricity theft in South Africa has become a major problem. This led to several developments from both industries and research institutes to counter these actions. Since equipment is already installed and major capital has been invested to provide electricity for a broad spectrum of consumers, the challenge is to find a low cost solution harnessing current investments and technology to detect electricity theft more accurately. This thesis investigates into the electricity theft topic. Two different methods, Time Domain Pulse Reflectometry and a data driven platform based on the Theory of Constraints philosophy, were investigated to provide means to detect and determine the impact of illegal electricity usage. Both methods required detailed designs to conduct preliminary proof of concept tests in a laboratory environment. These methods are evaluated against their economical viability, possible practical implications and applications. This thesis presents a practical approach to electricity theft detection and provides the basic tools for management of this ever-increasing problem. / AFRIKAANSE OPSOMMING: Suid Afrika se elektrisiteit diefstal statistiek het die afgelope jare skrikwekkend gegroei. Dit het die industrie genoop om baie meer navorsing in die area te doen. Met reeds gevestigde toerusting en tegnologie om di´e energie medium so effektief moontlik te versprei, is die uitdaging juis om ’n ekonomiese oplossing te vind om reeds beskikbare tegnologie¨e meer doeltreffend aan te wend. Die doel van die tesis is om die gebied van elektrisiteit diefstal na te vors. Twee verskillende metodes is ondersoek, naamlik Tydgebied-pulse-reflektometrie en ’n informasie gebaseerde stelsel wat op die Randvoorwaarde Teorie gebaseer is, om effektief die omvang van elektrisiteit diefstal in ’n mikro, asook makro omgewing te bepaal. Die twee metodes is in ’n beheerde omgewing getoets sodat die konsepte wat ontwikkel is bewys kon word. Die metodes is ge-evalueer in terme van die ekonomiese lewensvatbaarheid daarvan met inagneming van die praktiese implikasies. Die tesis bied bestuur die nodige kennis om elektrisiteit diefstal in die praktyk doeltreffend die hok mee te slaan.

The purpose of this essay is to understand meeting between hidden refugees and health professionals through interviews with refugee in hiding and health professionals. The implantation of the essay has been made by social science research methods which I have used as a qualitative survey. The material that I have used in this paper is to interview with hidden refugee and health care workers. I have used the different sources such as literature, internet and different laws which relates to the topic of this easy. I am using the power of theories to analyze the work. The work highlights relation between healthcare professionals and hidden refugees. The work is based on a new law that called SFS and that is health care for some foreigners who reside in Sweden without the necessary of permeation which according to the Social Board (2010) gives the hidden and undocumented person entitled to care that cannot be deferred. The result of my investigation was that hidden refugee’s right to emergency cares is not always met in practice although they are legally entitled to it. Another result was that the hidden meeting with health care professionals is not problem in itself but being refused to care is problematic . Controlled documents from health professionals page allows hidden may feel at a disadvantage. In this case crated anxiety and fear among the hidden people seeking care .This means that they seek care at nonprofit organizations instead. Conclusions about my essay is that a more clear legislation should be enacted and that healthcare professionals should be payable after care needs and not by legal status and ability to pay.

A project report submitted to the Faculty of Engineering, University of the Witwatersrand, in partial fulfilment of the requirements for the degree of Master of Science in Engineering. Johannesburg 1995. / Advances in digital computing technology make it possible to improve the design of the Man Machine Interface (MMI), SCADA and ALARM modules used in electrical utility control centres. to overcome the problem of control staff data overloading. A possible solution is proposed, based on-an explicit representation of a disturbed power system state in addition to quiescent conditions. The structure of modem SCADA, installations is analysed in terms of the computing power of full graphic workstations, the quantities of element data delivered to the control room and the capabilities of intelligent remote terminal units. This analysis indicates that existing designs for the presentation of SCADA data need to change to solve the data overloading-problem. The proposed philosophy moves the focus of attention from the element level up to the device level by grouping and dividing all elements into categories at the RTU and linking them to their parent device, Control staff are notified graphically on the one-line displays, next to the device in question, of the existence of abnormal elements by category. The element state details for the device are only displayed on demand, resulting in a 95% reduction of alarm text messages. Suggestions are made as to the software functions needed at tbe RTU and the workstation to assist with the display of system data. Lastly racommendations are offered to reduce maintenance by standardising and pre-ordering device element data. / AC2017

As novas tecnologias FACTS aplicadas ao sistema de transmissão, com base em eletrônica de potência, podem também ser úteis à distribuição. Para tal é preciso conduzir um procedimento de consolidação da utilização e do desempenho destas, para sua aplicação sem riscos. Neste trabalho, dois aspectos serão contemplados. O primeiro se refere à aplicação do dispositivo FACTS atuando como um capacitor série. Em se tendo controle de módulo e da fase da tensão inserida em série com a linha pode-se fazê-la comportar-se como uma queda em uma reatância série capacitiva ou indutiva. O controle dessa reatância série (aumentando/diminuindo) permitirá a aplicação do conceito de compensação série em qualquer ponto do sistema de distribuição, provendo benefícios de um controle contínuo da tensão e também do controle do fluxo de carga no sistema independente da corrente. O segundo aspecto refere-se ao uso dos dispositivos na conexão de alimentadores controlando a potência ativa entre eles. Para esta operação outro dispositivo UPFC, com conceito similar ao descrito acima, entretanto atuando na fase da tensão entre 2 barras, comporta-se como um transformador defasador com variação contínua de ?taps?, podendo controlar a potência ativa entre os alimentadores. A aplicação destas tecnologias propiciarão vários benefícios para a expansão da distribuição tais como, flexibilização do uso da rede, interligação de alimentadores permitindo manobras de blocos de energia sem ?pisca?, ajuste contínuo do suporte de reativos durante a operação, controle dinâmico do fluxo de potência. O objetivo deste trabalho é estudar a aplicabilidade da tecnologia FACTS e estender este conceito para aplicação em sistemas de distribuição e conduzir simulações digitais em redes de distribuição (15kV) identificando o desempenho e os benefícios atingidos. O programa de simulação utilizado é o ATP (Alternative Transients Program). / The new FACTS technologies applied to the transmission system, based on power electronics, can also be useful to the distribution. For that, it is necessary to drive a procedure to consolidate the use and the performance for their application without risks. In this work two aspects will be approached. The first refers to the application of a FACTS device acting as series compensator. This device will be able to control the voltage in module and phase in order to act as a voltage drop in a serie reactance with capacitive or inductive features. The control of this series reactance (increasing/ decreasing) will allow the application of series compensation concept to any point of the distribution system, providing the benefits of continuous control of the voltage added to the load flow control in the system independent of the current. The second aspect refers to its use in the connection of two feeders controlling the active power between them. For this operation other device, UPFC, with similar concept as described previously, acts mainly in the phase of the injected voltage in the line, performing as a phase-shift with continuous taps variation and is able to control the active power flow between feeders. The application of this technology will provide several benefits for the distribution expansion, such as, a greater flexibility in the use of the network, connection of feeders without load flow interruption, continuous adjust of reactive power during the operation and dynamic control of power flow. The purpose of this work is to study the applicability of the FACTS technology, to extend this concept for the application in the distribution system by using digital simulations in distribution network up to 15kV identifying the performance and the reached benefits.

by Kin Kwong Leung. / Thesis submitted in: November 1999. / Thesis (M.Phil.)--Chinese University of Hong Kong, 2000. / Includes bibliographical references (leaves 67-[70]). / Abstracts in English and Chinese. / Chapter 1 --- Introduction --- p.1 / Chapter 1.1 --- Code Division Multiple Access (CDMA) --- p.1 / Chapter 1.1.1 --- The Cellular Concept --- p.2 / Chapter 1.2 --- Fading and Power Control --- p.3 / Chapter 1.2.1 --- Large Scale Fading --- p.3 / Chapter 1.2.2 --- Small Scale Fading --- p.4 / Chapter 1.2.3 --- Power Control --- p.5 / Chapter 1.2.4 --- Standard Interference Function --- p.5 / Chapter 1.3 --- Previous Work --- p.6 / Chapter 1.3.1 --- Power Control --- p.6 / Chapter 1.3.2 --- Convergence Analysis --- p.8 / Chapter 1.4 --- Scope of this Thesis --- p.8 / Chapter 1.5 --- Organization of the Thesis --- p.9 / Chapter 2 --- System Model --- p.10 / Chapter 2.1 --- System and Definitions --- p.10 / Chapter 2.2 --- Varying Link Gains Model --- p.11 / Chapter 2.3 --- SIR model in CDMA System --- p.13 / Chapter 2.4 --- Simulation Model --- p.14 / Chapter 3 --- Fade Margin --- p.17 / Chapter 3.1 --- Introduction --- p.17 / Chapter 3.2 --- Fixed-step Power Control Algorithm --- p.18 / Chapter 3.3 --- Definitions and Feasibility of SIR --- p.19 / Chapter 3.3.1 --- Definition --- p.19 / Chapter 3.3.2 --- Feasibility --- p.20 / Chapter 3.4 --- Performance Analysis on Fading Channel --- p.22 / Chapter 3.4.1 --- Single-User --- p.22 / Chapter 3.4.2 --- Multiple-User --- p.24 / Chapter 4 --- Generalized Step Power Control Algorithm --- p.28 / Chapter 4.1 --- Introduction --- p.28 / Chapter 4.2 --- Generalized Fixed Step Power Control Algorithm --- p.29 / Chapter 4.3 --- Existence of the Solution --- p.30 / Chapter 4.4 --- Parameter Optimization --- p.31 / Chapter 4.4.1 --- Single-User --- p.34 / Chapter 4.4.2 --- Multiple-User --- p.37 / Chapter 4.5 --- Performance Analysis --- p.41 / Chapter 4.5.1 --- Single-User --- p.41 / Chapter 4.5.2 --- Multiple-User --- p.42 / Chapter 4.6 --- Hybrid Scheme --- p.47 / Chapter 5 --- Convergence Analysis --- p.49 / Chapter 5.1 --- Introduction --- p.49 / Chapter 5.2 --- Totally Asynchronous Models --- p.50 / Chapter 5.3 --- Normalized Interference Function --- p.52 / Chapter 5.4 --- Existence of Quantized Solution --- p.53 / Chapter 5.5 --- Convergence Theorem --- p.55 / Chapter 6 --- Conclusion and Future Work --- p.64 / Chapter 6.1 --- Conclusion --- p.64 / Chapter 6.2 --- Future Works --- p.65 / Bibliography --- p.67