<p> The stress relieving mechanisms in two different batches of thermal-shock resistant calcia-PSZ have been investigated. The nature of the stress relief in the two materials appears to result from the transformation of the pure ZrO₂ component of the microstructure at temperatures below, within, and above the normal transformation temperature range. In the batch #1 material, which contains a larger volume fraction of monoclinic phase, the cubic matrix material behaves in a "brittle" fashion resulting in the production of a high density of microcracks in the body. The density of these cracks is such that the level of energy that can be stored in the body is limited and thermal shock resistance results. The batch #2 material contains considerably less monoclinic material and the evidence suggests that the cubic matrix within it can act in a ductile fashion. This ductility together with the twinning of the monoclinic component of the microstructure possibly relieves the stresses developed in the material on thermal shock. </p> <p> In the batch #2 material, large platelets were observed to develop following thermal cycling from temperatures above those of the normal transformation. It has been demonstrated that stress plays a major role in the development of these features. In view of the possible ductility of the cubic matrix in this material it is suggested that the thermal cycling "works" the material, texturing the pure zirconia component in it, so leading to the development of the observed platelets. </p> / Thesis / Master of Engineering (ME)