Spelling suggestions: "subject:"than walled tubular structures"" "subject:"then walled tubular structures""
1 |
Origami inspired design of thin walled tubular structures for impact loadingShantanu Ramesh Shinde (7039910) 15 August 2019 (has links)
<div>Thin walled structures find wide applications in automotive industry as energy absorption devices. A great deal of research has been conducted to design thin walled structures, where the main objective is to reduce peak crushing forces and increase energy absorption capacity. With the advancement of computers and mathematics, it has been possible to develop 2D patterns which when folded turn into complex 3D structures. This technology can be used to develop patterns for getting structures with desired properties. </div><div>In this study, square origami tubes with folding pattern (Yoshimura pattern) is designed and studied extensively using numerical analysis. An accurate Finite Element Model (FEM) is developed to conduct the numerical analysis. A parametric study was conducted to study the influence of geometric parameters on the mechanical properties like peak crushing force, mean crushing force, load uniformity and maximum intrusion, when subjected to dynamic loading. </div><div>The results from this analysis are studied and various conclusions are drawn. It is found that, when the tube is folded with the pattern having specific dimension, the performance is enhanced significantly, with predictable and stable collapse. It is also found that the stiffness of the module varies with geometrical parameters. With a proper study it is possible to develop origami structures with functionally graded stiffness, the performance of which can be tuned as per requirement, hence, showing promising capabilities as an energy absorption device where progressive collapse from near to end impact end is desired.</div><div><br></div>
|
2 |
Structural Optimization of Thin Walled Tubular Structure for CrashworthinessShinde, Satyajeet Suresh January 2014 (has links)
Indiana University-Purdue University Indianapolis (IUPUI) / Crashworthiness design is gaining more importance in the automotive industry due to high competition and tight safety norms. Further there is a need for light weight structures in the automotive design. Structural optimization in last two decades have been widely explored to improve existing designs or conceive new designs with better crashworthiness and reduced mass. Although many gradient based and heuristic methods for topology and topometry based crashworthiness design are available these days, most of them result in stiff structures that are suitable only for a set of vehicle components in which maximizing the energy absorption or minimizing the intrusion is the main concern. However, there are some other components in a vehicle structure that should have characteristics of both stiffness and flexibility. Moreover, the load paths within the structure and potential buckle modes also play an important role in efficient functioning of such components. For example, the front bumper, side frame rails, steering column, and occupant protection devices like the knee bolster should all exhibit controlled deformation and collapse behavior.
This investigation introduces a methodology to design dynamically crushed thin-walled tubular structures for crashworthiness applications. Due to their low cost, high energy absorption efficiency, and capacity to withstand long strokes, thin-walled tubular structures are extensively used in the automotive industry. Tubular structures subjected to impact loading may undergo three modes of deformation: progressive crushing/buckling, dynamic plastic buckling, and global bending or Euler-type buckling. Of these, progressive buckling is the most desirable mode of collapse because it leads to a desirable deformation characteristic, low peak reaction force, and higher energy absorption efficiency. Progressive buckling is generally observed under pure axial loading; however, during an actual crash event, tubular structures are often subjected to oblique impact loads in which Euler-type buckling is the dominating mode of deformation. This undesired behavior severely reduces the energy absorption capability of the tubular structure. The design methodology presented in this paper relies on the ability of a compliant mechanism to transfer displacement and/or force from an input to desired output port locations. The suitable output port locations are utilized to enforce desired buckle zones, mitigating the natural Euler-type buckling effect. The problem addressed in this investigation is to find the thickness distribution of a thin-walled structure and the output port locations that maximizes the energy absorption while maintaining the peak reaction force at a prescribed limit. The underlying design for thickness distribution follows a uniform mutual potential energy density under a dynamic impact event. Nonlinear explicit finite element code LS-DYNA is used to simulate tubular structures under crash loading. Biologically inspired hybrid cellular automaton (HCA) method is used to drive the design process. Results are demonstrated on long straight and S-rail tubes subject to oblique loading, achieving progressive crushing in most cases.
|
Page generated in 0.075 seconds