Thesis (Ph. D.)--Ohio State University, 2005. / Title from first page of PDF file. Document formatted into pages; contains xxii, 200 p.; also includes graphics (some col.). Includes bibliographical references (p. 190-200). Available online via OhioLINK's ETD Center.

No description available.

No description available.

3,4-(±)-Methylenedioxymethamphetamine (MDMA) is a synthetic amphetamine derivative commonly used as a recreational drug. Although the selectivity of MDMA for the serotonergic system in rat and humans is well established, the specific mechanism associated with MDMA-induced neurotoxicity is not fully understood. The long-term neurotoxicity of MDMA appears to be dependent upon systemic metabolism since direct administration of MDMA into the brain fails to reproduce the neurotoxic effects seen following peripheral administration, indicating that the parent compound alone is unlikely to be responsible for the neurotoxicity. MDMA is O-demethylenated to the catechol metabolite N-methyl-α-methyldopamine (N-Me-α-MeDA) and N-demethylated to MDA by cytochrome (s) P450 (CYP450). Thioether (glutathione and N-acetylcysteine) metabolites of N-Me-α-MeDA and α-MeDA are neurotoxic and can be found in rat brain following s.c. injection of MDMA. Because multidose administration of MDMA is typical of drug intake during rave parties, we investigated the effects of multiple doses of MDMA on the concentration of neurotoxic thioether metabolites in rat brain. Administration of MDMA at 12-h intervals for a total of four injections led to a significant accumulation of the N-Me-α-MeDA thioether metabolites in striatal dialysate. In contrast, acute release of 5-HT concentrations was decreased. Since isoenzymes of the CYP2D subfamily (30% metabolism), and the CYP2B or CYP3A1 isoforms, catalyze the low and high KM O-demethylenation reactions, respectively, we subsequently examined the potential role of CYP2D1 in both a genetic and pharmacological model. The data is consistent with the hypothesis that systemic metabolism of MDMA contributes to MDMA-induced serotonergic neurotoxicity via the 20) generation of reactive metabolites. In both the genetic and pharmacological models of CYP2D1 deficiency, attenuation of MDMA-mediated decreases in brain 5-HT concentrations were in the same range (30-40%). Finally, we examined the contribution of various transporters using genetic and pharmacological models to investigate the mechanisms regulating the concentration of thioether metabolites in MDMA neurotoxicity. The data suggest that by regulating various transporters and brain concentrations of the neurotoxic thioether metabolites of MDMA, may subsequently modulate the degree of neurotoxicity. However, further studies are necessary to understand the precise mechanism by which Mrp’s and Oat1 transporters modulate MDMA-neurotoxicity. Taken together, these studies are consistent with the view that neurotoxicity of MDMA requires systemic metabolism to form α-MeDA and N-Me-α- MeDA by CYP2D6. Therefore, It is likely that neurotoxicity is mediated by the formation of systemic neurotoxic metabolites.

A series of 6-endo-(methylthio)-bicyclo[2.2.1]heptane-2-endo-proline amides was synthesized to study the neighboring proline amide participation in electron transfer from thioethers. The thioether with endo-pyrrolidine amide formed a two-center three-electron SO bond after one electron oxidation and the oxidation potential of the thioether was lowered by 530 mV and 330 mV compared to the corresponding exo-pyrrolidine amide and the primary amide analogues, respectively. The thioether with a proline methyl ester showed the oxidation potential of 410 mV higher than that of the pyrrolidine amide. The basis for this surprising result was revealed by an X-ray crystallographic structure study of the diastereomerically pure proline methyl ester which showed amide carbonyl n → methyl ester π* interaction which removes electron density from the neighboring amide which results in less effective neighboring amide participation in thioether oxidation. This accounts for the electrochemical result. A potent synthetic route for S-tert-butyl m-terphenyl thioethers was developed and a series of such thioethers was synthesized. Electrochemical studies showed through-space S∙∙∙π interaction with lower oxidation potentials for thioethers with more electron rich aromatic groups and higher oxidation potentials with electron withdrawing aromatic groups. Selective Suzuki reactions were discovered in which mono-coupling of the precursor dibromides could be achieved. A second coupling was then possible in which two different aromatic rings are attached to the central aryl thioether ring. This enabled the synthesis of a two-sulfur three-aromatic ring extended m-terphenyl thioether as a potential electron conductor. In support of this possibility this compound showed an oxidation potential of +0.99 V which is less positive than the +1.09 V measured for the mono-sulfur analog.

The tuberous sclerosis-2 (Tsc-2) gene product, tuberin, functions as a renal tumor suppressor. Treatment of Eker (Tsc-2 EK/+) rats and primary renal epithelial cells derived from Tsc-2 EK/+ rats (QTRRE cells) with 2,3,5-tris-(glutathion-S-yl) hydroquinone (TGHQ) results in loss of heterozygosity at the Tsc-2 locus in kidney tumors and QTRRE cells. QTRRE cells are carcinogenic in athymic nude mice. Analysis of kidney tumors formed in Tsc-2 EK/+ + rats following 8-months of TGHQ treatment reveals increases in B-Raf, Raf-1, pERK, cyclin D1, p27Kip1, 4EBP1, p-4EBP1(Thr70), p-4EBP1(Ser65), and p-4EBP1(Thr37/46) protein expression. These data establish the involvement of mTOR and MAPK signaling cascades in tuberin null tumors. Similar increases in 4EBP1 and p4EBP1 are observed in renal tumor QTRRE-xenografts in nude mice. Concomitant with increases in expression of these proteins in TGHQ-induced renal tumors, similar changes are observed in QTRRE cells, which also exhibit high ERK, B-Raf and Raf-1 kinase activity; and increased expression of cyclin D1, p27, p-4EBP1 (Thr70), p-4EBP1 (Ser65), and p-4EBP1 (Thr37/46). Manipulation of the Raf/MEK/ERK kinase cascade in QTRRE cells, with kinase inhibitors and siRNA, indicates that Raf-1/MEK/ERK participates in crosstalk with 4EBP1 to regulate translation of cyclin D1.Cyclin D1 and p27 protein levels are increased in the cytoplasm in our RCC models. In normal HK-2 cells, p27 and cyclin D1 are localized to the nucleus. Due to the instability of the cyclin D1-CDK4 complex, p27 interaction is necessary for cyclin D1-CDK4 complex assembly and stabilization in the nucleus. Manipulation of p27 protein levels in QTRRE cells with phosphodiesterase inhibitors, dibutyryl cAMP, and the proteosome inhibitor MG132, all result in a parallel increase in p27 and cyclin D1. Furthermore, p27 siRNA and sorafenib treatment both cause a decrease in p27 and cyclin D1. Further manipulation of cAMP, Rap1B, and B-Raf proteins, revealed that cAMP/PKA/Rap1B/B-Raf activation and B-Raf//ERK MAPK inhibition both modulate p27 expression and compartmental localization in tuberous sclerosis renal cancer. Phosphodiesterase inhibitors play a role in regulating the expression, degradation, and cytoplasmic localization of p27. Therefore, cytoplasmic p27-cyclin D1 mislocalization and stabilization may have an oncogenic role in the cytosol and play a crucial role in tumor formation.

Quinones represent an important class of endogenous compounds such as neurotransmitters and coenzyme Q10, electrophilic xenobiotics and environmental toxicants that have known reactivity based on their ability to redox cycle and generate oxidative stress, as well as to alkylate target proteins. 1,4-Benzoquinone (BQ) is a reactive quinone that we have used to help predict target residue covalent binding by such compounds. Hydroquinone glutathione conjugates (HQ-GSH) cause renal cell necrosis by producing reactive oxygen species (ROS) and by adducting proteins preferentially localized in the S3 segment of the renal proximal tubules. In vitro experimentation using model peptides and proteins have identified cysteine, lysine, arginine, and glutamic acid as amino acids targeted for quinone-thioether adduction. By mimicking a standard protein digestion protocol (100 mM ammonium bicarbonate pH 7.5, or 50 mM Tris-HCl pH 7.5), we demonstrated that cysteine-BQ adducts are unstable. Taken together, these results indicate that BQ-adduct formation on cysteine residues may be a transient interaction, where physiological conditions may play a role in adduct stability. In vivo experimentation following administration of 2-(glutathion-S-yl)HQ (MGHQ, 400 μmol/kg, iv, 2 hr) to Long Evans rats identified the specific site of quinone-thioether protein adduction on a number of proteins. Urinary proteins were isolated, and either trypsin digested en masse and analyzed by multi-dimensional protein identification technology (MuDPIT) or, following SDS-PAGE, single immunopositive bands were excised, trypsin digested and analysed by LC-MSMS. Following site-specific identification of adducts, 3-dimensional protein modeling of adducts on the protein was performed as a way to reveal the potential structural consequence of the modification on 3D structure. The outer stripe of the outer medulla (OSOM) is the target site of protein adduction caused by quinone-thioethers. Using a 2DGE-Western blot approach, in combination with an extensive knowledge of quinol-thioether chemistry, LC-MSMS, and the latest MSMS analysis software, we identified the specific amino acid site of adduction on 17 unique peptides from 34 target proteins within the OSOM. Of the 22 bands analyzed, adducted peptides were identified in 11 of them. Many of the target proteins identified have previously been identified as a target of other electrophiles, producing additional evidence that such protein adduction is selective rather than random. The site-specific identification of covalently adducted proteins is a prerequisite for understanding the biological significance of chemical-induced PTMs and the subsequent toxicological response.

Ces travaux portent sur la conception et l’étude des propriétés photophysiques de polymères de coordination et organométalliques. Dans un premier temps, nous nous sommes intéressés aux adduits formés à partir d’halogénure de cuivre(I) (CuxXyLz ; X= I, Br, Cl). Cette famille de composés possède une grande richesse structurelle de part les conditions de synthèse (choix du ligand, stoechiométrie, choix du solvant, température…) et des propriétés de luminescence variées. Nous nous sommes concentrés sur la synthèse, la caractérisation physique et photophysique d’adduits de CuX à ligands de types monothioéther (RSR) et dithioéther (RS(CH2)nSR). Nous avons ensuite étendu notre étude aux adduits CuX coordinés à des ligands P-chirogéniques (i.e chiralité portée par l’atome de phosphore) puis à des adduits CuX coordinés à la fois par des ligands phosphorés (PPh3 ou dppm) et par des ligands mono- ou dithioéthers. Dans un second temps, nous avons voulu connaître l’impact de l’incorporation de ligands P-chirogéniques (P(C17H35)(Ph)(i-Pr)) sur les propriétés photophysiques de polymères organométalliques conjugués 1D à base de platine(II) et de ligands arylbiséthynyles (-C≡C(Ar)C≡C-). Ce type de polymère basé sur le platine(II) est souvent utilisé comme modèle dans la compréhension des transferts d’énergie dans les états excités. Ces polymères, une fois caractérisés, ont été comparés aux analogues achiraux contenant le fragment trans-Pt(P(PBu)3)2 et plusieurs différences ont été notées. Les observations et conclusions sur la relation structure-propriété sont utiles pour la conception future de matériaux photoniques portant des groupements chiraux. / This work focuses on the design and study of photophysical properties of coordination and organometallics polymers. Initially, we focused on adducts formed from copper(I) halides (CuxXyLz; X = I, Br, Cl). Indeed, these compounds have great structural diversity depending on the synthesis conditions (nature of ligand, stoichiometry, choice of solvent, temperature...) and various luminescence properties. We focused on the synthesis, physical and photophysical characterization of copper(I) halide adducts based on monothioether (RSR) and dithioether (RS(CH2)nSR) ligands. Then, we extended our study to the adducts of copper(I) halide coordinated by phosphorus P-chirogenics ligands (ie chirality carried by the phosphorus atom) and then to CuX adducts coordinated by both phosphorus ligands (PPh3 or dppm)) and mono- or dithioether ligands. Secondly, the impact of the incorporation of P-chirogenics ligands (P(C17H35)(Ph)(i-Pr)) on the photophysical properties of organometallic conjugated polymers 1D based on platinum(II) and arylbisethynyles ligands (-C≡C(Ar)C≡C-) was investigated. This type of polymer based on platinum(II) is often used as a model for the understanding of excited states energy transfers. These polymers, once characterized, were compared to the achiral analogues containing the fragment of trans-Pt(P(PBu)3)2 and several differences were noted. The findings and conclusions on the structure-property relationship are useful in the future design of photonic materials bearing chiral groups.

The results described in this dissertation have demonstrated several alternative proton exchange membranes (PEM) for hydrogen-air and direct methanol fuel cells (DMFC) that perform as well or better than the state of the art Nafion perfluorosulfonic acid membrane. Direct aromatic nucleophilic substitution polycondensations of disodium 3,3′ S-disulfonate-4,4′ S-difluorodiphenylsulfone (SDFDPS), 4,4′ S-difluorodiphenylsulfone (DFDPS) (or their chlorinated analogs, SDCDPS, DCDPS) and 4,4′ S-thiobisbenzenethiol (TBBT) in the presence of potassium carbonate were investigated. Electrophilic aromatic substitution was employed to synthesize the SDFDPS or SDCDPS comonomers in high yields and purity. High molecular weight disulfonated poly(arylene thioether sulfone) (PATS) copolymers were easily obtained using the SDFDPS monomers, but in general, slower rates and a lower molecular weight copolymer was obtained using the analogous chlorinated monomers. Tough and ductile membranes were solution cast from N,N-dimethylacetamide for both series of copolymers. The degrees of disulfonation (20-50%, PATS 20-50) were controlled by varying the ratio of disulfonated to unsulfonated comonomers. Composite membranes were prepared by homogeneous solution blending the copolymers with phosphotungstic acid (PTA) in dimethylacetamide (DMAc). The composite PATS membranes exhibited moderate PTA molecule water extraction after acidification treatments performed at either room or boiling temperatures. The membranes containing HPA showed improved conductivity at high temperatures (120 °C) and low relative humidities when compared to the pure copolymers. Molecular weight of the copolymers plays a critical role in the overall copolymer physical behavior. It is well known that molecular weight has an enormous impact on practically all of the physical properties of polymeric systems. This dissertation discusses the influence of molecular weight on the characteristics of a specific family of PEM PATS copolymers. This study elucidated that the lower molecular weight materials did indeed behave differently than the higher molecular weight copolymers. Specifically, the water uptake and permeability to methanol decreased with increasing molecular weight. Furthermore, the fully hydrated mechanical properties also improved with molecular weight. The synthesis and fabrication of 45 mole percent disulfonated poly(arylene ether phenyl phosphine oxide diphenyl sulfone) terpolymer-heteropolyacid (HPA) composite membranes and membrane electrode assemblies were chosen for detailed investigation. A series of 45 mole percent disulfonated biphenol-based poly(arylene ether phenyl phosphine oxide diphenyl sulfone) terpolymers (BPSH45-PPO) were also synthesized by nucleophilic aromatic substitution polymerizations. The level of disulfonation was constant at 45 mole percent providing a compromise between high conductivity at low humidity and reasonable mechanical properties in liquid water. The amounts of 4,4′-difluorodiphenyl phenyl phosphine oxide comonomer incorporated into the terpolymer backbone were precisely controlled from 0-50 mole percent relative to the 4,4′-dihalodiphenyl sulfone. Phosphine oxide moieties were employed to enhance the interactions with the PTA relative to the pure copolymer. The composite BPSH45-PPO membranes exhibited lower HPA molecule water extraction after acidification at room and boiling temperatures, which was ascribed to the strong hydrogen and polar interactions between the phosphine oxide moiety and functional groups on the HPA. The membranes containing HPA displayed improved conductivity at high temperatures and low relative humidities when compared to the pure terpolymer samples. The increase of proton conductivity was attributed to the water retention characteristics of the HPA molecules, which allowed enhanced mobility of the protons even at lower humidification levels, providing superior hydrogen-air fuel cell performance. The effect of hexafluoroisopropylidene bisphenol (6FBP) incorporation into 45 mole percent disulfonated poly(arylene ether sulfone) copolymers was investigated. This novel series of directly disulfonated poly(arylene ether sulfone) copolymers with various mole ratios of the 6FBP were synthesized in high molecular weight. The levels of fluorination within the statistically random copolymer architecture were varied from 0-100 mole percent using 6FBP and the correct stoichiometric amount of 4,4′-biphenol. The 6FBP monomer was introduced to decrease the water swelling and improve bonding characteristics with Nafion-bonded electrodes. Indeed, water uptake decreased with increasing incorporation of the 6FBP monomer into the terpolymer. This suggested that the hydrophobic fluorinated material aided in water repulsion of the system. Proton conductivity decreased slightly as the amount of fluorination increased, which was interpreted to be due to the decrease in the ion-exchange capacity. High temperature hydrogen/air fuel cell experiments indicated better Nafion-bonded electrode adhesion for the partially fluorinated materials, as depicted by high temperature (120 °C) and low humidity (50% RH) hydrogen-air fuel cell performance. Investigations into polymeric electromechanical transducers were based on poly(arylene sulfone) ion-exchange membranes bonded between two conductive metal layer electrodes. Imposed deformations and small electric fields allowed similar explorations of both sensing and actuation applications. These copolymers produced larger sensitivities than the benchmark Nafion systems, which was interpreted as being due to their higher hydrated moduli. Methodologies for better defining the morphology of the electrodes were identified to enhance the capacitance and effective interfacial area of the conductive electrodes. The new procedures afforded major improvements to performance and transduction. Transducer actuation at lower frequencies was improved by employing a new direct assembly electrode fabrication technique that suggested a strong correlation between the capacitance and charge motion. / Ph. D.