Registruojant (fotografuojant) objektus, dėl netinkamos vaizdo kameros padėties ar nepakankamos judėjimo erdvės gaunami vaizdo iškraipymai. Tokie vaizdų iškraipymai vadinami sukimosi ir perspektyvos iškraipymais. Šio darbo tikslas – ištirti kaip tiksliai, panaudojant vaizdo kameros posvyrio kampų reikšmes ir atstumą iki registruojamo objekto, galima atstatyti iškreiptą vaizdą. Vaizdo kameros posvyrio kampų (krypavimo ir nuolydžio) matavimui, pritaikomas trijų ašių analoginis akcelerometras, o atstumui matuoti – ultragarsinis atstumo jutiklis. Pasuktų vaizdų atstatymui naudojami sukonstruoto vaizdo kameros posvyrio kampų matuoklio duomenys. Kaip alternatyvi priemonė, vaizdo pasukimo kampui nustatyti, naudojama „radon“ transformacija. Tyrimai parodė, kad vaizdų atstatymui geriau naudoti vaizdo kameros posvyrio kampų matuokliu išmatuotus krypavimo kampus, nes „radon“ transformacija negalima nustatyti sudėtingų vaizdų pasukimo kampo. Vaizdo perspektyvos iškraipymų atstatymui, pagal “pinhole” (mažos skylutės) kameros modelį, kuris dažniausiai naudojamas robotų regoje, buvo sudarytas matematinis modelis. Šis modelis, lyginant su vaizdų atstatymo pagal keturis objekto kampus metodu, tinka įvairesnių formų iškreiptiems vaizdams atstatyti. Vaizdų atstatymui pasitelktas MathWorks, Image Processing paketas. Atstatytų vaizdų palyginimui su originaliu, skaičuojamas dvimatis koreliacijos koeficientas tarp dviejų to paties dydžio vaizdo matricų. / Image distortions may appear because of inappropriate position of the camera or because of an insufficient space movement while taking pictures of objects. These kinds of image distortions are called rotation and perspective distortions. The aim of the work is to investigate how the camera tilt meanings and distance to the object could help to restore the image distortions. To measure camera tilt angles (roll and pitch angles) the three axis analogical accelerometer is used, and to measure the distance - ultrasonic range finder. The measurements of designed camera tilt angles device data is used in order to restore rotated images. As an alternative method for setting roll angle, the “radon” transformation is used. The researches have showed that it is more useful to use the measurements of camera roll angles, because “radon” transformation is not capable to identify rotation angles of elaborate images. To set image perspective distortion rectification according to “pinhole” camera model, which is used in robot vision, the mathematical model was made. This model compared with image restoration according to four object corners method is more suitable for various forms of image distortions. To restore image MathWorks, Image Processing batch was used. The comparison between original and restorted image was found computing the two-dimensional correlation coefficient between image matrices of the same size.

This thesis focuses on the design of the hexacopter construction for photographic purposes with maximum load of 4 kg. When constructing a hexacopter it is necessary to take into account a number of factors. For the actual construction the correct dimensioning of the supporting frame is important as well as the locomotor system. The main concept of this thesis includes three-axis gimbal for camera control. The verification of the structure strength was performed using FEM analysis. This work describes also the selection of individual components and their wiring. The end is dedicated to safety and different procedures for reducing operation risks.

The aim of this master’s thesis Control of one servo-drive of three-axis rotary table is to develop a real-time motion control solution for the commercially available servo drives on the base of perspective solution available in the industry and the implementation of the chosen solution. The project includes the description of the current solution for the rotary table control, the description of suitable on the market available controllers, the rotary table control design for two selected controllers, the designed model on the base of identificated parameters of DC engine, the design of current, velocity and position regulators for the servo drive control, the servo drive control implementation by two selected controllers ESCON and EPOS2, the servo drive control function verification and the evaluation of achieved results.

This thesis solves the impact of conventional compensation to the volumetric accuracy of the CNC machine. It is therefore a practical research work, where are in the theoretical introduction mentioned requirements for machine tools, the types of errors that can occur on three-axis kinematics, compensation for the control system Siemens Sinumerik 840D sl and devices by means of which are these compensation under the work formed and subsequently verified. In this work can be seen the measured values and graphs from each measurements, a detailed analysis of the results and drawing conclusions from these results.