The thesis deals with data network testing. The aim of the thesis is to design a methodology for the comprehensive measurement of network transmission parameters and design of the tester concept and realisation by helping to extend the existing JMeter program.

Typically a wireless LAN infrastructure is designed and installed by Networking professionals. These individuals are extremely familiar with wired networks, but are often unfamiliar with wireless networks. Thus, Wireless LAN installations are currently handicapped by the lack of an accurate, performance prediction model that is intuitive for use by non-wireless professionals. To provide a solution to this problem, this thesis presents a method of predicting the expected wireless LAN throughput using a site-specific model of an indoor environment. In order to develop this throughput prediction model, two wireless LAN throughput measurement products, LANFielder and SiteSpy, were created. These two products, which are patent pending, allow site-specific network performance measurements to be made. These two software packages were used to conduct an extensive measurement campaign to evaluate the performance of two IEEE 802.11b access points (APs) under ideal, multiuser, and interference scenarios. The data from this measurement campaign was then used to create empirically based throughput prediction models. The resulting models were first developed using RSSI measurements and then confirmed using predicted signal strength parameters. / Master of Science

Wireless Local Area Networks (WLAN) have proliferated in the last 5 years. The IEEE 802.11b products have become commonplace both in the residential and business places for untethered Internet access. However the end user experience has often been less satisfactory than what the technology can offer. The degradation in the performance of the system is mainly attributed to the poor network design. The current network design is primarily RF centric. There are two factors that need to be in the incorporated in the design. Firstly a clear understanding of the traffic sources in the network such as the peak load of the system is necessary. Secondly the design should account for the limitations of the indoor propagation such as interference and multipath. The goal of this thesis is to develop a simulator which will predict the performance (throughput) of an end user. The throughput is predicted for a given topology and traffic source. The simulator is built on object oriented design. To validate the simulator a measurement campaign was conducted. The campaign was conducted in two different channel conditions, office space and open hall. The channel measurements were also performed at these locations to understand the multipath. Comparative studies indicate that the choice of the rate adaptation algorithm hugely influences the predicted throughput. The simulator results match very well with the measurement results for the open space scenario. For the office space scenario the simulator varied by roughly 20% from the measurement results. This was due to existence of multipath leading to Inter Symbol Interference. / Master of Science

The aim of this work was to peruse and desribe the high-speed data technology communicating over energy network. In this work was investigated broadband system communicating over low power distribution network. The laboratory network was designed for measuring parametres of this communication and performed set of tests. Lended devices were described, properties of technology specification and methods of connection and management were introduced. Management, configuration and measuring over web interface on the NMS device was described and simple dividision into corresponding functional blocks corresponding to structure of web bookmaks was made. Metodology of individual tests, grounded on documentation “recomandation” RFC and on introduced works, was elaboratly described. Used tools, their properties and managements were described. The transmission speed on application and physical layer were followed primarily, frequency dependencies on signal noise ratio and bits per carrier were followed secondary. Measured results from individuals tests were compared among each other and evaulated. This observation leaded into decision on needed criteria for varius application. The suitaibility for integration into communication network for maintaining corresponding QoS was appreised. Testing and chosen types of tests in this project were standardized and integrated into ITU standard. Individual tests are able to compare from the view of their testify charactestic.