We explore using pulsed latches for timing optimization -- a first in the academic FPGA community. Pulsed latches are transparent latches driven by a clock with a non-standard (i.e. not 50%) duty cycle. As latches are already present on commercial FPGAs, their use for timing optimization can avoid the power or area drawbacks associated with other techniques such as clock skew and retiming. We propose algorithms that automatically replace certain flip-flops with latches for performance gains. Under conservative short path or minimum delay assumptions, our latch-based optimization, operating on already routed designs, provides all the benefit of clock skew in most cases and increases performance by 9%, on average, essentially for "free". We show that short paths greatly hinder the ability of using pulsed latches, and further improvements in performance are possible by increasing the delay of certain short paths.

We explore using pulsed latches for timing optimization -- a first in the academic FPGA community. Pulsed latches are transparent latches driven by a clock with a non-standard (i.e. not 50%) duty cycle. As latches are already present on commercial FPGAs, their use for timing optimization can avoid the power or area drawbacks associated with other techniques such as clock skew and retiming. We propose algorithms that automatically replace certain flip-flops with latches for performance gains. Under conservative short path or minimum delay assumptions, our latch-based optimization, operating on already routed designs, provides all the benefit of clock skew in most cases and increases performance by 9%, on average, essentially for "free". We show that short paths greatly hinder the ability of using pulsed latches, and further improvements in performance are possible by increasing the delay of certain short paths.

Growing usage of smart and portable electronic devices demands embedded system designers to provide solutions with better performance and reduced power consumption. Due to the new development of IoT and embedded systems usage, not only power and performance of these devices but also security of them is becoming an important design constraint. In this work, a novel aggressive scaling based on timing speculation is proposed to overcome the drawbacks of traditional DVFS and provide security from power analysis attacks at the same time. Dynamic voltage and frequency scaling (DVFS) is proven to be the most suitable technique for power efficiency in processor designs. Due to its promising benefits, the technique is still getting researchers attention to trade off power and performance of modern processor designs. The issues of traditional DVFS are: 1) Due to its pre-calculated operating points, the system is not able to suit to modern process variations. 2) Since Process Voltage and Temperature (PVT) variations are not considered, large timing margins are added to guarantee a safe operation in the presence of variations. The research work presented here addresses these issues by employing aggressive scaling mechanisms to achieve more power savings with increased performance. This approach uses in-situ timing error monitoring and recovering mechanisms to reduce extra timing margins and to account for process variations. A novel timing error detection and correction mechanism, to achieve more power savings or high performance, is presented. This novel technique has also been shown to improve security of processors against differential power analysis attacks technique. Differential power analysis attacks can extract secret information from embedded systems without knowing much details about the internal architecture of the device. Simulated and experimental data show that the novel technique can provide a performance improvement of 24% or power savings of 44% while occupying less area and power overhead. Overall, the proposed aggressive scaling technique provides an improvement in power consumption and performance while increasing the security of processors from power analysis attacks.