La escasez de registros sísmicos de gran magnitud considerados significativos, limita la determinación de la respuesta sísmica de una edificación de concreto armado. En este sentido, los acelerogramas artificiales representan una alternativa para definir el evento sísmico porque consideran condiciones específicas del sitio en estudio. Esta investigación analiza la respuesta sísmica de las estructuras para diversos registros sísmicos artificiales generados de espectros de diseño para distintas condiciones geotécnicas. El procedimiento de análisis empleado será el dinámico tiempo historia no lineal para obtener una mayor precisión en la respuesta sísmica. Los resultados obtenidos muestran que las derivas de entrepiso de las señales artificiales creadas con la función de intensidad de Liu se ajustan mejor a las derivas obtenidas del sismo real escalado. / The lack of large seismic records in some world regions limits the determination of the seismic response of a building. For that reason, artificial accelerograms represent an alternative to define the seismic event because they consider specific conditions of study site. This research analyses the structures seismic response for various artificial seismic records generated from design spectra and different geotechnical conditions. Dynamic nonlinear time history analysing was used to obtain greater precision in the seismic response. The results obtained show that the mezzanine drifts of the artificial signals created with the Liu intensity function better fit the drifts obtained from the scaled real earthquake. / Tesis

A large amount of low-rise unreinforced masonry structures (URM) can be found in Groningen, the Netherlands. More and more induced earthquakes with short duration have been detected in this region due to gas exploitation. Local unreinforced masonry (URM) buildings were initially not designed for withstanding seismic actions, so that unexpected damage may occur due to their vulnerability, raising insecurity among residents. Existing low-rise masonry buildings in Groningen can be divided into different categories based on their characteristics. Two types of residential masonry buildings that fulfil the prerequisites for performing non-linear seismic assessment are chosen to be studied in this thesis project, including the terraced house and the detached house. The seismic assessment of structures requires the use of both a discretization method and a seismic assessment method. The discretization method is used to translate the mechanical model into a finite element model used for the numerical analysis. Several methods have previously shown to be applicable for seismic assessment, but this work investigates the implications of using a continuum model (CM) and an equivalent frame model (EFM) approach to discretization in the general-purpose finite element package described in n DIANA-FEA-BV (2017). The continuum model approach adopted was in a previous work by Schreppers et al. (2017) validated against experimental results and is as such deemed representative of the physical behaviour of the mechanical models investigated. An equivalent frame model approach to be used with DIANA is proposed in the work by Nobel (2017). The continuum model approach uses continuum elements with a constitutive model developed for the seismic assessment of masonry structures. This constitutive model captures both shear and flexural failure mechanisms. The equivalent frame model approach uses a combination of numerically integrated beam elements and nodal interfaces, each with a distinct constitutive model, thus decoupling the description of the flexural and shear behaviour. This approach aims to capture the macro-behaviour at the structural level. The applicability of the proposed equivalent frame model approach is evaluated by how well it replicates the validated continuum model approach results. The two discretization methods described are evaluated using two types of seismic assessment methods. The first seismic assessment method used consists of first performing a quasi-static non-linear pushover analysis (NLPO) on the model. This results in the pushover curve, which describes the global behaviour of the model under an equivalent lateral load based on the fundamental mode shape of the structure. The pushover curve is then used with the N2-method described in EN1998-1 (2004) to assess at which peak ground acceleration (PGA) that the model reaches the near-collapse (NC) limit state. The second seismic assessment method consists of performing dynamic non-linear time-history analyses (NLTH). This method uses recorded accelerograms to impose the inertial forces. The PGA for the accelerogram where the near-collapse limit state is reached is compared to the PGA from the use of the N2-method. The applicability of the pushover analysis in conjunction with the N2-method is evaluated by how well it replicates the PGA found from the time-history analyses and by how well it replicates local failure mechanisms.  Therefore, the main objectives of this project can be described by the following two questions: i. To what extent can the equivalent frame method be applicable as a proper discretization method for pushover analyses and time-history analyses of low-rise unreinforced masonry residential buildings in the Groningen region? ii. To what extent can the non-linear pushover method be adopted to assess the seismic behaviour of low-rise unreinforced masonry residential buildings in the Groningen region? The applicability of the equivalent frame model showed to vary. For describing local failure mechanisms its applicability is poor. Further work on connecting the edge piers to transverse walls is needed. For seismic assessment using the N2-method the applicability of the equivalent frame model approach is sensible. The conservative displacement capacity counteracts the fact that it is worse at describing local unloading, which produced a larger initial equivalent stiffness of the bi-linear curves in comparison to the continuum model. For seismic assessment using the time-history signals, its applicability is possible. While it could show different behaviour in terms of displacement and damping forces, it still showed a similar PGA at the near-collapse limit state for the cases at hand. The seismic assessment of the terraced and detached houses by the N2-method is similar to the seismic prediction by applying time-history analyses. However, there are still some variations in the initial stiffness, force capacity and displacement capacity between these two assessment methods due to the assumptions and limitations in this study. Overall, considering the pros and cons of the quasi-static pushover method, it is deemed applicable during the seismic assessment of the unreinforced masonry structures in the Groningen area. / En stor mängd låga oarmerade murverksbyggnader finns i Groningen, Nederländerna. Allt fler jordbävningar med kort varaktighet har uppmätts i regionen pågrund utav gasproduktion. I området förekommer oarmerade murverksbyggnader som initialt inte var dimensionerade för jordbävningslaster, vilket har resulterat i oönskade skador samt osäkerhet för invånarna. Förekommande låga murverksbyggnader i Groningen kan fördelas i olika grupper beroende på deras egenskaper. Två typer av murverksbyggnader utformade som bostäder uppföljer kraven för att utföra olinjär jordbävningsanalys och har i detta projekt studerats. Typerna som studerats är radhus samt fristående hus. Jordbävningsnalys av byggnader kräver användningen av en diskretiseringsmetod samt en utvärderingsmetod. Diskretiseringsmetoden används för att översätta den mekaniska modellen till en finita elementmodell för numerisk analys. Flera metoder har tidigare visat sig vara applicerbara för utvärdering under jordbävningslaster, men det här projektet studerar konsekvensen från användningen av en kontinuumelement modell (CM) samt en ekvivalent rammodel (EFM) för diskretisering i det generella finita elementpaketet beskrivet i DIANA-FEA-BV (2017). Metoden som använts för att skapa kontinuumelement modeller vart i ett tidigare projekt av Schreppers et al. (2017) validerat mot experimentella resultat och anses därför  representera det fysiska beteendet hos de mekaniska modellerna. Ett förslag för hur ekvivalenta rammodeller ska uppföras i DIANA ges i arbetet av Nobel (2017). Metoden för en kontinuumelement modell använder en konstitutiv lag som utvecklats för utvärderingen av murverksbyggnader under jordbävningslaster. Denna konstitutiva modell fångar skjuv- samt böjbrottmekanismer. Metoden för en ekvivalent rammodell använder numeriskt integrerade balkelement samt nodelement, där båda elementtyper använder en distinkt konstitutiv modell vilket gör att skjuv- samt böjbeteende hanteras individuellt. Den här metoden har som mål att fånga makro-beteendet av elementen. Applicerbarheten av den föreslagna metoden för ekvivalenta rammodeller är utvärderat via hur väl den replikerar resultaten från en kontinuumelement modell. De två diskretiseringsmetoderna jämförs via två metoder för utvärdering under jordbävningslaster. Den första utvärderingsmetoden består av att först utföra en kvasi-statisk olinjär stjälpningsanalys (NLPO) på modellen. Detta leder till stjälpningskurvan, vilket beskriver den globala responsen av modellen under en ekvivalent horisontal last som baserats på första fundamentala moden av bärverket. Stjälpningkurvan används sedan med N2-metoden som beskrivs i EN1998-1 (2004) för att utvärdera vid vilken maximal markacceleration (PGA) som modellen når nära-kollapsgränstilsståndet (NC). Den andra utvärderingsmetoden består av att utföra dynamiska samt olinjära tids-historikanalyser (NLTH). För att göra detta så används accelerogram för att applicera den dynamiska lasten. Den maximala markaccelerationen för signalen där tids-historikanalysen når nära-kollapsgränstilsståndet är jämfört mot den maximala markaccelerationen som fås när N2-metoden används. Applicerbarheten för stjälpningsanalysen tillsammans med N2-metoden utvärderas via hur väl den replikerar resultatet av den maximala markaccelerationen som erhållsfrån tids-historikanalyserna, samt via hur väl metoden replikerar lokala brottmoder. Baserat på detta så kan målen med detta project sammanfattas via dessa två frågeställningar: i. Till vilken grad kan den föreslagna metoden för ekvivalenta rammodeller användas för utvärdering under jordbävningslaster när stälpningsanalyser, samt tids-historikanalyser, utförs på låga och oarmerade murverksbyggnader utformade som bostadsrätter i Groningen? ii. Till vilken grad kan olinjär stjälpningsanalys användas för utvärdering under jordbävningslaster på låga och oarmerade murverksbyggnader utformade som bostadsrätter i Groningen? Applicerbarheten av metoden för ekvivalenta rammodeller visade sig variera. För att beskriva lokala brottmoder så är applicerbarheten låg. Fortsatt arbete som undersöker hur pelarelementen ska kopplas mot de tvärgående väggarna bör utföras. För utvärdering via användandet av N2-metoden så visade det sig att applicerbarheten är rimlig. Den konservativa deformationskapaciteten motverkar det faktum att metoden för ekvivalenta rammodeller är sämre på att påvisa lokal avlastning, vilket i sin tur resulterade i en större ekvivalent initial styvhet för de bi-linjära kurvorna i jämförelse mot metoden för kontinuumelement modeller. För utvärdering när tids-historikanalyser användes så visade applicerbarheten vara rimlig. Samtidigt som det kunde uppstå skillnader i beteende när det kom till deformation samt dämpning, så visade det sig att metoderna fortfarande uppvisade en liknande maximal markacceleration vid nära-kollapsgränstilsståndet för bärverken i fråga. Utvärderingen under jordbävningslast för modellerna när N2-metoden användes visade liknande resultat som när tids-historikanalyserna utfördes. Det förekom dock skillnader i den initiala styvheten, i skjuvkraftskapaciteten och i deformationskapciteten mellan utvärderingsmetoderna från gjorda antaganden samt begränsningar hos arbetet. Som en slutsats när för- samt nackdelar värderas så visade det sig att stjälpningsmetoden är en rimlig utvärderinsgmetod för oarmerade murverksbyggnader i Groningen.

Indonesia is a developing country that suffers from earthquakes and windstorms and where at least 60% of houses are non-engineered structures, built by unskilled workers using masonry and timber. The non-engineered housing units developed in urban region are also vulnerable to seismic hazard due to the use of low quality of material and constructions method. Those structures are not resistant to extreme lateral loads or ground movement and their failure during an earthquake or storm can lead to significant loss of life. This thesis is concerned with the structural performance of Indonesian low-rise buildings made of masonry and timber under lateral seismic load. The research presented includes a survey of forms of building structure and experimental, analytical and numerical work to predict the behaviour of masonry wall and traditional timber frame buildings. Experimental testing of both masonry and timber have been carried out in Indonesia to establish the quality of materials and to provide material properties for numerical simulations. The experimental study found that the strength of Indonesia-Bali clay brick masonry are below the minimum standard required for masonry structures built in seismic regions, being at least 50% lower than the requirement specified in British Standard and Eurocode-6 (BS EN 1996-1-1:2005). In contrast, Indonesian timber materials meet the strength classes specified in British Standard/Eurocode- 5 (BS EN 338:2009) in the range of strength grade D35-40 and C35).Structural tests under monotonic and cyclic loading have been conducted on building components in Indonesia, to determine the load-displacement capacity of local hand-made masonry wall panels and timber frames in order to: (1) evaluate the performance of masonry and timber frame structure, (2) investigate the dynamic behaviour of both structures, (3) observe the effect of in-plane stiffness and ductility level, and (4) examine the anchoring joint at the base of timber frame that resists the overturning moment. From these tests, the structural ductility was found to be less than two which is below the requirement of the relevant guidelines from the Federal Emergency Management Agency, USA (FEMA-306). It was also observed that the lateral stiffness of masonry wall is much higher than the equivalent timber frame of the same height and length. The experimental value of stiffness of the masonry wall panel was found to be one-twelfth of the recommended values given in FEMA-356 and the Canadian Building code. The masonry wall provides relatively low displacement compared to the large displacement of the timber frame at the full capacity level of lateral load, with structural framing members of the latter remaining intact. The weak point of the timber frame is the mechanical joint and the capacity of slip joint governs the lateral load capacity of the whole frame. Detailed numerical models of the experimental specimens were setup in Abaqus using three-dimensional solid elements. Cohesive elements were used to simulate the mortar behaviour, exhibiting cracking and the associated physical separation of the elements. Appropriate contact definitions were used where relevant, especially for the timber frame joints. A range of available material plasticity models were reviewed: Drucker-Prager, Crystalline Plasticity, and Cohesive Damage model. It was found that the combination of Crystalline Plasticity model for the brick unit and timber, and the Cohesive Damage model for the mortar is capable of simulating the experimental load-displacement behaviour fairly accurately. The validated numerical models have been used to (1) predict the lateral load capacity, (2) determine the cracking load and patterns, (3) carry out a detailed parametric study by changing the geometric and material properties different to the experimental specimens. The numerical models were used to assess different strengthening measures such as using bamboo as reinforcement in the masonry walls for a complete single storey, and a two-storey houses including openings for doors and windows. The traditional footing of the timber structures was analysed using Abaqus and was found to be an excellent base isolation system which partly explains the survival of those structures in the past earthquakes. The experimental and numerical results have finally been used to develop a design guideline for new construction as well as recommendations for retrofitting of existing structures for improved performance under seismic lateral load.