An instrument is being developed at the Department of Biomedical Engineering; Research and Development (MT-FoU), at the University Hospital of Umeå with the aim to detect prostate cancer ex vivo. Using a combination of tactile resonance technology and Raman spectroscopy the instrument is intended to be used in the operating room during radical prostatectomy to identify positive surgical margins. The hypothesis was that the length of the piezoelectric element used in the tactile resonance sensor affects the sensor's sensitivity and reproducibility when measuring the stiffness of soft tissue, and that there might be an optimal impression depth to measure at. The specific aim of this study was to evaluate two piezoelectric elements, of different lengths, by the sensitivity and reproducibility of the measurements they performed. Measurements were performed on five silicone samples of different stiffness, during a 2 mm impression. The standard deviation of the stiffness parameters, the R2 of the linear regression used to determine the stiffness parameter, and the depth at the which the most linear relationship between impression force and frequency shift was found were studied using linear mixed-effects models to identify any significant differences between the elements. The long element had a significantly higher R2 of 0.98 compared to 0.93 for the short element, and a higher measurement depth of 0.47 mm compared to 0.37 mm for the short element. No difference between the elements were found on accuracy as measured by standard deviation of the stiffness parameter. It was concluded that this was not enough to claim that one element was better than the other. / Ett instrument utvecklas på avdelningen för Medicinsk teknik, forskning och utveckling, vid Norrlands universitetssjukhus med målet att detektera prostatacancer ex vivo. Instrumentet kombinerar taktil resonansteknologi med Ramanspektroskopi och är tänkt att användas i operationssalen under radikal prostatektomi för att identifiera positiv kirurgisk marginal. Hypotesen var att längden av det piezoleketriska element som används i den taktila resonanssensorn påverkar sensorns känslighet och reproducerbarhet vid mätning av styvhet av mjukvävnad, och att det kan finnas ett optimalt intryckningsdjup att mäta på. Målet med denna studie var att utvärdera två piezoelektriska element, av olika längd, utifrån känsligheten och reproducerbarheten av mätningarna de utförde. Mätningarna gjordes på fem silikonsprover av olika styvhet, under 2 mm intryckning. Standardavvikelsen av styvhetsparametern, R2 av den linjära regression som användes för att bestämma styvhetsparametern, samt det intryckningsdjup på vilket det mest linjära förhållandet mellan intryckningskraft och frekvensskift hittades, studerade med så kallade linear mixed-effects modeller för att identifiera signifikanta skillnader mellan elementen. Det långa elementet hade ett signifikant högre R2 på 0.98 jämfört med det korta elementets 0.93, och ett högre mätdjup på 0.47 mm jämfört med det korta elementets 0.37 mm. Ingen skillnad mellan elementens standardavvikelser av styvhetsparametern hittades. Slutsatsen drogs att resultatet inte var nog för att påstå att det ena elementet är bättre än det andra.

<p dir="ltr">The goal of this thesis is to design nature-inspired biomimetic materials that recapitulate essential features of tissues for biomedical applications including tissue modeling of drug transport and surgical adhesion.</p><p dir="ltr">The first part of this thesis utilizes collagen and glycosaminoglycans to mimic tissues for preclinical modeling of large-molecule drug transport. We first utilize hydrazone crosslinking chemistry with hyaluronic acid to form interpenetrating networks with collagen at different concentrations. The interpenetrating networks enabled a wide range of mechanical properties, including stiffness and swellability, and microstructures, such as pore morphology and size, that can better recapitulate diverse tissues. The mechanical and microstructural differences translated into differences in transport of the macromolecules of different sizes and charges from these matrices. Large macromolecules were impacted by mesh size, whereas small macromolecules were influenced primarily by electrostatic forces. The tunable properties demonstrated by the collagen and crosslinked hyaluronic acid hydrogels can be used to mimic different tissues for early-stage assays to understand drug transport and its relationship to matrix properties.</p><p dir="ltr">We then explore how the glycosaminoglycans hyaluronic acid, chondroitin sulfate, and heparin in collagen hydrogels influence drug transport via glycosaminoglycan-drug interactions and network development. Incorporating different types and concentrations of glycosaminoglycans led to glycosaminoglycan-collagen hydrogels with a range of collagen networks and negative charge densities to recapitulate different tissue compositions. Hyaluronic acid increased the overall viscosity of the hydrogel matrix, and chondroitin sulfate and heparin altered collagen fibrillogenesis. All three GAGs formed concentration-dependent polyelectrolyte complexes with positively charged macromolecules. Transport of positively charged macromolecules through collagen gels with chondroitin sulfate and high concentrations of heparin was inhibited due to complexation and charge effects. Conversely, collagen with low concentrations of heparin hastened the transport of macromolecules due to the limited collagen network resulting from fibrillogenesis inhibition. Overall, the addition of different GAGs into tissue models can better recapitulate native tissue to accurately predict therapeutics transport through a variety of tissues.</p><p>17</p><p dir="ltr">The second part of this thesis investigates the impact of pH and oxidation on an elastin- and mussel-inspired surgical sealant. We combined sodium periodate, an oxidizer, with an L-3,4-dihydroxyphenylalanine-modified elastin-like polypeptide to elucidate how the crosslinking mechanism and intermediate formation impacted adhesion, cure time, and stiffness. Formulations resisted burst pressures greater than physiological internal pressures. They did not swell and had stiffnesses similar to those of soft tissues, and their gelation times varied from seconds to hours. Small increases in the formulation pH led to the formation of α,β-dehydrodopamine intermediates which facilitated the development of multiple crosslinking networks. The mussel-inspired elastin-like adhesive can serve as a model of mussel proteins to further improve our understanding of mussel chemistry. This study exemplifies the importance of pH and oxidation on the performance of mussel-inspired adhesives in surgical sealing within physiological environments.</p><p dir="ltr">The final part of this thesis explores using biomimetic designs in an outreach activity aimed at engaging high school women in chemical engineering. The design and application of the activity led to increased interest in chemical engineering among the participants. There was greater alignment between students' aspirations and the field of chemical engineering, highlighting the potential for such outreach initiatives to inspire future generations of chemical engineers.</p>