The Flashing Yellow Arrow Left Turn signal is quickly becoming prominent in Central Florida as a new method of handling left turns at traffic signals. While the concept of a protected-permitted left turn is not groundbreaking, the departure from the typical display of a five-section signal head is, for this type of operation. The signal head introduced is a four-section head with a flashing yellow arrow between the yellow and green arrows. With this signal head quickly becoming the standard, there is a need to re-evaluate the operational characteristics of the left turning vehicle and advance the knowledge of the significant parameters that may affect the ability for a driver to make a left turn at a signalized intersection. With previous research into the behavioral and operational characteristics of the flashing yellow arrow conducted, there is more information becoming available about the differences between this signal and the previously accepted method of allowing left turns at an intersection. The protected-permitted signal is typically displayed at an intersection with up to two through lanes and generally a protected signal is installed when the number of through lanes increases above two unless specific criteria is met. With the advent of larger arterials and more traffic on the highway networks, the push to operate these intersections at their maximum efficiency has resulted in more of these protected-permitted signals being present at these larger intersections, including the flashing yellow arrow. The core of the research that follows is a comparative analysis of the operation and parameters that affect the left turn movement of the intersection with larger geometry to that of the smaller geometry. The significant parameters of the left turn movement were examined through means of collecting, organizing and analyzing just over 68 hours of field data. This research details the determining of the significant parameters based on the generation of a simulation model of the protected left turn using Synchro, a traffic simulation package, and regression models using field driven data to determine the significant parameters for predicting the number of left turns that can be made in the permitted phase under specific operating conditions. Intuitively, there is an expectation that a larger intersection will not allow for as many permitted lefts as a smaller intersection with all conditions remaining the same. The conclusions drawn from this analysis provide the framework to understanding the similarities and the differences that are encountered when the intersection geometry differs and help to more efficiently manage traffic at signalized intersections. The work of this field promises to enhance the operations of the left turning movement for traffic control devices. With an understanding of the statistical models generated, a broader base of knowledge is gained as to the significant parameters that affect a driver's ability to make the left turn. A discussion of the statistical differences and between the models generated from the small and large geometry intersections is critical to drive further research into standards being developed for the highway transportation network and the treatment of these large signalized intersections. The exploration of specific parameters to predict the number of permitted left turns will yield results as to if there is more to be considered with larger intersections moving forward as they become a standard sight on the roadway network.

<p>  </p> <p>Advancements in technology have propelled the availability of enriched and more frequent information about traffic conditions as well as the external factors that impact traffic such as weather, emergency response etc. Most newer vehicles are equipped with sensors that transmit their data back to the original equipment manufacturer (OEM) at near real-time fidelity. A growing number of such connected vehicles (CV) and the advent of third-party data collectors from various OEMs have made big data for traffic commercially available for use. Agencies maintaining and managing surface transportation are presented with opportunities to leverage such big data for efficiency gains. The focus of this dissertation is enhancing the use of CV data and applications derived from fusing it with other datasets to extract meaningful information that will aid agencies in data driven efficient decision making to improve network wide mobility and safety performance.   </p> <p>One of the primary concerns of CV data for agencies is data sampling, particularly during low-volume overnight hours. An evaluation of over 3 billion CV records in May 2022 in Indiana has shown an overall CV penetration rate of 6.3% on interstates and 5.3% on non-interstate roadways. Fusion of CV traffic speeds with precipitation intensity from NOAA’s High-Resolution Rapid-Refresh (HRRR) data over 42 unique rainy days has shown reduction in the average traffic speed by approximately 8.4% during conditions classified as very heavy rain compared to no rain. </p> <p>Both aggregate analysis and disaggregate analysis performed during this study enables agencies and automobile manufacturers to effectively answer the often-asked question of what rain intensity it takes to begin impacting traffic speeds. Proactive measures such as providing advance warnings that improve the situational awareness of motorists and enhance roadway safety should be considered during very heavy rain periods, wind events, and low daylight conditions.</p> <p>Scalable methodologies that can be used to systematically analyze hard braking and speed data were also developed. This study demonstrated both quantitatively and qualitatively how CV data provides an opportunity for near real-time assessment of work zone operations using metrics such as congestion, location-based speed profiles and hard braking. The availability of data across different states and ease of scalability makes the methodology implementable on a state or national basis for tracking any highway work zone with little to no infrastructure investment. These techniques can provide a nationwide opportunity in assessing the current guidelines and giving feedback in updating the design procedures to improve the consistency and safety of construction work zones on a national level.  </p> <p>CV data was also used to evaluate the impact of queue warning trucks sending digital alerts. Hard-braking events were found to decrease by approximately 80% when queue warning trucks were used to alert motorists of impending queues analyzed from 370 hours of queueing with queue trucks present and 58 hours of queueing without the queue trucks present, thus improving work zone safety. </p> <p>Emerging opportunities to identify and measure traffic shock waves and their forming or recovery speed anywhere across a roadway network are provided due to the ubiquity of the CV data providers. A methodology for identifying different shock waves was presented, and among the various case studies found typical backward forming shock wave speeds ranged from 1.75 to 11.76 mph whereas the backward recovery shock wave speeds were between 5.78 to 16.54 mph. The significance of this is illustrated with a case study of  a secondary crash that suggested  accelerating the clearance by 9 minutes could have prevented the secondary crash incident occurring at the back of the queue. Such capability of identifying and measuring shock wave speeds can be utilized by various stakeholders for traffic management decision-making that provide a holistic perspective on the importance of both on scene risk as well as the risk at the back of the queue. Near real-time estimation of shock waves using CV data can recommend travel time prediction models and serve as input variables to navigation systems to identify alternate route choice opportunities ahead of a driver’s time of arrival.   </p> <p>The overall contribution of this thesis is developing scalable methodologies and evaluation techniques to extract valuable information from CV data that aids agencies in operational decision making.</p>